MCU/WISE-1570-FirmwareUpdate-For-BC95

From ESS-WIKI
Revision as of 07:42, 7 September 2017 by Will.chen (talk | contribs)
Jump to: navigation, search

Introduction

Running CCS installer

Step01: Prepare boards.
Note: If you want to get pin-definition detailed, please get in touch with the contact person from ADVANTECH.

Wise1570_nbiot_firmware_update_01.png

Wise1570_nbiot_firmware_update_02.png

Step02: Check the number of COM port detected from PC.
Note: If you don't setup WISE-ED22 before, please refer to link for it firstly.

Wise1570_nbiot_firmware_update_03.png

Step03: Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95.
Note: If you don't have programming tool "Codeloader", please get in touch with the contact person from ADVANTECH.

Wise1570_nbiot_firmware_update_04.png
Wise1570_nbiot_firmware_update_05.png

Step04: Reset.

Wise1570_nbiot_firmware_update_06.png
Wise1570_nbiot_firmware_update_10.png
Wise1570_nbiot_firmware_update_11.png

Step05: Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95.

Wise1570_nbiot_firmware_update_07.png
Wise1570_nbiot_firmware_update_08.png

Step06: Find batch file “CodeLoaderBC95HA.bat”, modify the number of com port detected from PC in it and run it to program for BC95.

Wise1570_nbiot_firmware_update_09.png
Wise1570_nbiot_firmware_update_10.png
Wise1570_nbiot_firmware_update_11.png

Retrieved from "https://ess-wiki.advantech.com.tw/wiki/index.php?title=MCU/WISE-1570-FirmwareUpdate-For-BC95&oldid=8361"