MIO-2361 Yocto 3.0_1.0.0002 BSP Release Notes
From ESS-WIKI
Introduction
This BSP is based on Yocto 3.0 ("Zeus") and Intel Yocto BSP 6.0 (Intel-corei7-64).
Major packages version list
| Package | Version |
|---|---|
| Linux Kernel | 5.4.8 |
| Systemd | 243.2 |
| Chromium | 79.0.3945 |
| Docker-ce | 19.03.2 |
| SUSI | 4.2.16327 |
| Qt5 | 5.13.2 |
| Qt5 Creator | 4.9.2 |
Quick Start Guide
Please check this out.
Docker image for Build Environment
Please check this out.
How to create installer USB
Please check this out.
Revision History
| Revision | Date | Description |
|---|---|---|
| 1.0.0002 | 2021-05-06 | Initial Version |
Known issues
| Subject | Work Around |
|---|---|
| If a HDD/USB with previously installed BSP is also connected to target, the bootloader on Live media may load a rootfs from this HDD/USB instead of its own rootfs image. In this case the installation will fail. | |
| root user playback video file via VLC media player will pop "Audio output failed" | |
| Hardware acceleration can not enable while playback video on Youtube via Chromium | |
| No sound output while playback video on Youtube via Chromium | |
| No correct audio output device can be selected while use adv user to playback video file via VLC media player | |
| All COM port was config as debug port | Use below command to disable debug function# for N in 0 1 2; do systemctl disable serial-getty@ttyS$N; done # sed -i "s/console=ttyS0\S* //" /boot/loader/entries/boot.conf # reboot |