Difference between revisions of "Qt5Creator toolchain Qt 5.11.3"

From ESS-WIKI
Jump to: navigation, search
 
(3 intermediate revisions by 3 users not shown)
Line 41: Line 41:
 
$ sudo tar -zxvf rk3399_toolchain_Qt_V5.11.3_*.tar.gz -C /opt/toolchain_Qt_V5.11.3/rk3399/
 
$ sudo tar -zxvf rk3399_toolchain_Qt_V5.11.3_*.tar.gz -C /opt/toolchain_Qt_V5.11.3/rk3399/
 
</pre>
 
</pre>
 +
  
 
= Working within QtCreator =
 
= Working within QtCreator =
  
−
The method of using this toolchain with qtcreator is the same as 5.9.4 toolchain. Therefore, you can refer to [http://ess-wiki.advantech.com.tw/view/RK3288_qt5Creator rk3288_qt5Creator.]
+
Use qtcreator to configure a complete build kit.
−
 
 
−
However, the following differences need to be noted:
 
  
 
== Config QtCreator ---- Qt Versions ==
 
== Config QtCreator ---- Qt Versions ==
  
−
#Bring up the options dialog using "Tools" -> "Options..."
+
#Bring up the options dialog using "Tools" -> "Options..."  
−
#Select the "Build & Run" page on the left, switch to "Qt Versions" tab, and click "Add..."
+
#Select the "Build & Run" page on the left, switch to "Qt Versions" tab, and click "Add..."  
−
#Select qmake file
+
#Select qmake file  
−
#;Select "/opt/toolchain_Qt_V5.11.3/rk3288/sysroot/qmake-debian-buster-armhf".<br/>
+
#;Select "/opt/toolchain_Qt_V5.11.3/rk3288/sysroot/qmake-debian-buster-armhf".  
−
#;or&nbsp;
+
#;or&nbsp;  
−
#;RK3399 Select&nbsp;"/opt/toolchain_Qt_V5.11.3/rk3399/sysroot/qmake".<br/>
+
#;RK3399 Select&nbsp;"/opt/toolchain_Qt_V5.11.3/rk3399/sysroot/qmake".  
−
#Input Version name "Qt 5.11.3 (RK3288 )" or "Qt 5.11.3 (RK3399&nbsp;)".
+
#;or&nbsp;RK3399 Select&nbsp;"/opt/toolchain_Qt_V5.11.3/rk3399/sysroot/qmake-debian-buster-armhf " 
 +
#Input Version name "Qt 5.11.3 (RK3288 )" or "Qt 5.11.3 (RK3399&nbsp;)".  
  
 
[[File:RK3288 Add Qt Verions.png|RTENOTITLE]]
 
[[File:RK3288 Add Qt Verions.png|RTENOTITLE]]
Line 62: Line 62:
 
== Config QtCreator ---- Kits ==
 
== Config QtCreator ---- Kits ==
  
−
#Bring up the options dialog using "Tools" -> "Options..."
+
#Bring up the options dialog using "Tools" -> "Options..."  
−
#Select the "Build & Run" page on the left, switch to "Kits" tab, and click "Add..."
+
#Select the "Build & Run" page on the left, switch to "Kits" tab, and click "Add..."  
−
#Click "Add".
+
#Click "Add".  
 +
 
 +
;<span style="color:#FF0000;">'''RK3288'''</span>
 +
;Name
 +
:input "RK3288 toolchain"
 +
;Device Tpye
 +
:Select "Generic Linux Device"
 +
;Device
 +
:Select "RK3288"
 +
;Compiler
 +
:Select "GCC (C,arm <span style="color:#FF0000;">32</span>bit in /usr/bin)" and "GCC (C++,arm <span style="color:#FF0000;">32</span>bit in /usr/bin)"
 +
;Qt version
 +
:Select "Qt 5.11.3 (RK3288)"
 +
:&nbsp;
 +
:&nbsp;
  
−
;<span style="color:#FF0000;">'''RK3288'''</span>
 
−
;Name
 
−
:input "RK3288 toolchain"
 
−
;Device Tpye
 
−
:Select "Generic Linux Device"
 
−
;Device
 
−
:Select "RK3288"
 
−
;Compiler
 
−
:Select "GCC (C,arm <span style="color:#FF0000;">32</span>bit in /usr/bin)" and "GCC (C++,arm <span style="color:#FF0000;">32</span>bit in /usr/bin)"
 
−
;Qt version
 
−
:Select "Qt 5.11.3 (RK3288)"<br/>
 
−
:<br/>
 
−
:
 
 
<span style="color:#FF0000;">'''RK3399'''</span>
 
<span style="color:#FF0000;">'''RK3399'''</span>
  
−
;Name
+
;Name  
−
:input "RK3399 toolchain"
+
:input "RK3399 toolchain"  
−
;Device Tpye
+
;Device Tpye  
−
:Select "Generic Linux Device"
+
:Select "Generic Linux Device"  
−
;Device
+
;Device  
−
:Select "RK3399"
+
:Select "RK3399"  
−
;Compiler
+
;Compiler  
−
:Select "GCC (C,arm <span style="color:#FF0000;">64</span>bit in /usr/bin)" and "GCC (C++,arm <span style="color:#FF0000;">64</span>bit in /usr/bin)"
+
:Select "GCC (C,arm <span style="color:#FF0000;">64</span>bit in /usr/bin)" and "GCC (C++,arm <span style="color:#FF0000;">64</span>bit in /usr/bin)"  
−
;Qt version
+
;Qt version  
−
:Select "Qt 5.11.3 (RK3288)"
+
:Select "Qt 5.11.3 (RK3399)"  
−
:<br/>
+
:&nbsp;
−
:<br/>
+
:&nbsp;
  
 
[[File:RK3288 Add Kits.png|RTENOTITLE]]
 
[[File:RK3288 Add Kits.png|RTENOTITLE]]
 +
 +
== Creating the Project ==
 +
 +
#Bring up "New" dailog using "File" -> "New File or Project..."
 +
#Select "Applications" -> 'Qt Widgets Application"
 +
#Click "Choose..."
 +
#;[[File:RK3399 Project 001.png|RTENOTITLE]] 
 +
#Use "Hello" as name
 +
#Create in "/mnt/sda1/work/qt/qt_PJ"
 +
#Click "Next"
 +
#;[[File:RK3399 Qt Project local.png|RTENOTITLE]] 
 +
#Check "RK toolchain"
 +
#Click "Next".
 +
#;[[File:RK3399 Qt Project toolchain.png|RTENOTITLE]] 
 +
#Use default settings for "Class Information"
 +
#Click "Next"
 +
#;[[File:RK3399 QT Project last.png|RTENOTITLE]] 
 +
#Use default settings for "Project Management"
 +
#Click "Finish"
 +
#;[[File:RK3399 Qt Project last2.png|RTENOTITLE]] 
 +
#Double click "Hello.pro" to switch to editor window
 +
#In new project it is necessary to add following two lines into qt project file.
 +
#:<code>target.path = .<br/> INSTALLS += target</code>
 +
#;[[File:RK3399 Qt Project code002.png|RTENOTITLE]] 
 +
#Press "Ctrl+S" to save file.
 +
#Double click "mainwindow.ui" to switch to Design mode
 +
#Drag & drop one Label widget on main form, use property editor on the right side to change text and font size
 +
#;[[File:2015-01-30 174418.png|RTENOTITLE]]
 +
#;[[File:RK3399 Qt Project code003.png|RTENOTITLE]] 
 +
#Save all project files using "File" -> "Save All"
 +
 +
== Building the Project ==
 +
 +
#Switch to "Projects" mode
 +
#Check if "build configuration" is set to "Debug".
 +
#;[[File:RK3399 Qt debug setting.png|RTENOTITLE]] 
 +
#Check if "Files to deploy" is correct
 +
#;[[File:RK3399 Qt run setting.png|RTENOTITLE]] 
 +
#Set environment variable DISPLAY in QtCreator -> Projects -> Run -> Run Environment. The value of DISPLAY is obtained from the rk3399. For example, execute instruction '''''echo $DISPLAY''''' on RK3399.
 +
#;[[File:RK3399 Qt ENV Display.png|RTENOTITLE]] 
 +
#Switch to "Edit" mode
 +
#Click "Build" using context menu of project "Hello"
 +
#;[[File:RK3399 Qt build start.png|RTENOTITLE]] 
 +
#The green "Build" bar means no error occured.
 +
#;[[File:RK3399 Qt build status.png|RTENOTITLE]] 
 +
#Press "Alt+4" to show "Compile Output".&nbsp;[[File:RK3399 Qt build output.png|RTENOTITLE]]
 +
 +
== Deploying the Application ==
 +
 +
#Click "Deploy" using context menu of project Hello[[File:RK3399 Qt deploy start.PNG|RTENOTITLE]]
 +
#The green "Deploy" bar indicates no error occured.[[File:RK3399 Qt deploy output.png|RTENOTITLE]]
 +
 +
== Debugging the Application ==
 +
 +
#Click debug icon to start debugging.
 +
#;[[File:RK3399 Qt debug start.png|RTENOTITLE]] 
 +
#Press "Alt+3" to show "Application Output"[[File:RK3399 Qt debug output.png|RTENOTITLE]]
 +
#The "Hello" shows up on primary display.
 +
#;[[File:RK3399 Qt result show.png|RTENOTITLE]] 
 +
#Click "stop" to stop debugging.
 +
#;[[File:RK3399 Qt debug stop.png|RTENOTITLE]] 
 +
#The deafult desktop returns back.[[File:RK3399 Qt default Desktop.png|RTENOTITLE]]

Latest revision as of 08:47, 6 August 2023

Prerequisites

Debian10(buster) is highly recommended OS to develop.

Installing required packages

Please login and perform the following commands: 

$ sudo apt-get install -y build-essential 
$ sudo apt-get install -y qtcreator 
$ sudo apt-get install -y qt5-default 
$ sudo apt-get install -y qt5-doc 
$ sudo apt-get install -y qt5-doc-html qtbase5-doc-html 
$ sudo apt-get install -y qtbase5-examples 
$ sudo apt-get install -y qt5-qmake 
$ sudo apt-get install -y rsync
$ sudo apt-get install -y gcc-8-arm-linux-gnueabihf g++-8-arm-linux-gnueabihf
$ sudo apt-get install -y gcc-8-aarch64-linux-gnu g++-8-aarch64-linux-gnu

Link arm-linux-gnu*-8 to arm-linux-gnu* and aarch64-linux-gnu*-8 to aarch64-linux-gnu*: 

$ sudo su
$ cd /usr/bin
$ for f in $(ls arm-linux-gnu*-8);do ln -sf $f $(echo $f|sed "s/-8//");done 
$ for f in $(ls aarch64-linux-gnu*-8);do ln -sf $f $(echo $f|sed "s/-8//");done
$ exit

Installing cross toolchain

Please download RK3288(Password: gm9i) and RK3399(Password: 0kkn) cross compiler toolchain first. Then execute the following command to unzip the cross compiler tool to the /opt directory

For RK3288 

$ sudo rm -rf /opt/toolchain_Qt_V5.11.3/rk3288/
$ sudo mkdir -p /opt/toolchain_Qt_V5.11.3/rk3288/
$ sudo tar -zxf rk3288_toolchain_Qt_V5.11.3_*.tar.gz -C /opt/toolchain_Qt_V5.11.3/rk3288/

For RK3399 

$ sudo rm -rf /opt/toolchain_Qt_V5.11.3/rk3399/ 
$ sudo mkdir -p /opt/toolchain_Qt_V5.11.3/rk3399/ 
$ sudo tar -zxvf rk3399_toolchain_Qt_V5.11.3_*.tar.gz -C /opt/toolchain_Qt_V5.11.3/rk3399/


Working within QtCreator

Use qtcreator to configure a complete build kit.

Config QtCreator ---- Qt Versions

  1. Bring up the options dialog using "Tools" -> "Options..."
  2. Select the "Build & Run" page on the left, switch to "Qt Versions" tab, and click "Add..."
  3. Select qmake file
    Select "/opt/toolchain_Qt_V5.11.3/rk3288/sysroot/qmake-debian-buster-armhf".
    or 
    RK3399 Select "/opt/toolchain_Qt_V5.11.3/rk3399/sysroot/qmake".
    or RK3399 Select "/opt/toolchain_Qt_V5.11.3/rk3399/sysroot/qmake-debian-buster-armhf "
  4. Input Version name "Qt 5.11.3 (RK3288 )" or "Qt 5.11.3 (RK3399 )".

RTENOTITLE

Config QtCreator ---- Kits

  1. Bring up the options dialog using "Tools" -> "Options..."
  2. Select the "Build & Run" page on the left, switch to "Kits" tab, and click "Add..."
  3. Click "Add".
RK3288
Name
input "RK3288 toolchain"
Device Tpye
Select "Generic Linux Device"
Device
Select "RK3288"
Compiler
Select "GCC (C,arm 32bit in /usr/bin)" and "GCC (C++,arm 32bit in /usr/bin)"
Qt version
Select "Qt 5.11.3 (RK3288)"
 
 

RK3399

Name
input "RK3399 toolchain"
Device Tpye
Select "Generic Linux Device"
Device
Select "RK3399"
Compiler
Select "GCC (C,arm 64bit in /usr/bin)" and "GCC (C++,arm 64bit in /usr/bin)"
Qt version
Select "Qt 5.11.3 (RK3399)"
 
 

RTENOTITLE

Creating the Project

  1. Bring up "New" dailog using "File" -> "New File or Project..."
  2. Select "Applications" -> 'Qt Widgets Application"
  3. Click "Choose..."
    RTENOTITLE
  4. Use "Hello" as name
  5. Create in "/mnt/sda1/work/qt/qt_PJ"
  6. Click "Next"
    RTENOTITLE
  7. Check "RK toolchain"
  8. Click "Next".
    RTENOTITLE
  9. Use default settings for "Class Information"
  10. Click "Next"
    RTENOTITLE
  11. Use default settings for "Project Management"
  12. Click "Finish"
    RTENOTITLE
  13. Double click "Hello.pro" to switch to editor window
  14. In new project it is necessary to add following two lines into qt project file.
    target.path = .
    INSTALLS += target
    RTENOTITLE
  15. Press "Ctrl+S" to save file.
  16. Double click "mainwindow.ui" to switch to Design mode
  17. Drag & drop one Label widget on main form, use property editor on the right side to change text and font size
    RTENOTITLE
    RTENOTITLE
  18. Save all project files using "File" -> "Save All"

Building the Project

  1. Switch to "Projects" mode
  2. Check if "build configuration" is set to "Debug".
    RTENOTITLE
  3. Check if "Files to deploy" is correct
    RTENOTITLE
  4. Set environment variable DISPLAY in QtCreator -> Projects -> Run -> Run Environment. The value of DISPLAY is obtained from the rk3399. For example, execute instruction echo $DISPLAY on RK3399.
    RTENOTITLE
  5. Switch to "Edit" mode
  6. Click "Build" using context menu of project "Hello"
    RTENOTITLE
  7. The green "Build" bar means no error occured.
    RTENOTITLE
  8. Press "Alt+4" to show "Compile Output". RTENOTITLE

Deploying the Application

  1. Click "Deploy" using context menu of project HelloRTENOTITLE
  2. The green "Deploy" bar indicates no error occured.RTENOTITLE

Debugging the Application

  1. Click debug icon to start debugging.
    RTENOTITLE
  2. Press "Alt+3" to show "Application Output"RTENOTITLE
  3. The "Hello" shows up on primary display.
    RTENOTITLE
  4. Click "stop" to stop debugging.
    RTENOTITLE
  5. The deafult desktop returns back.RTENOTITLE
Retrieved from "https://ess-wiki.advantech.com.tw/wiki/index.php?title=Qt5Creator_toolchain_Qt_5.11.3&oldid=30283"