Difference between revisions of "ROM-6881 How to use Camera"

Revision as of 04:46, 21 January 2025

ROM-6881 supports four MIPI-CSI ports.

For example： Advantech SOM-DB2510

Using “Camera 1” as an example.（Install the camera on the small board to another port）

Set GPIO_0/1/2/3 on SOM-DB2510 as 2-3, as shown in the following figure:

@@ Line 4: / Line 4: @@
 For example：&nbsp;Advantech SOM-DB2510
-[[File:ROM-6881 camera connector.png]]
+[[File:ROM-6881 camera connector.png|RTENOTITLE]]
 Using “Camera 1” as an example.（Install the camera on the small board to another port）
+Set GPIO_0/1/2/3 on SOM-DB2510 as 2-3, as shown in the following figure:
+[[File:ROM-6881 camera setting.png|RTENOTITLE]]
+=== '''Camera1：''' ===
 <pre># /tools/test/adv/camera/camera_rkaiq_test.sh 44</pre>
 [[File:ROM-6881 CSI0 FBC.png|500x300px|ROM-6881 CSI0 FBC.png]][[File:ROM-6881 CSI0 FBC1.png|500x300px|ROM-6881 CSI0 FBC1.png]]
+=== '''Camera2：''' ===
 <pre># /tools/test/adv/camera/camera_rkaiq_test.sh 62</pre>
-[[File:ROM-6881 CSI1 FBC.png]]
+[[File:ROM-6881 CSI1 FBC.png|RTENOTITLE]]
+=== '''Camera3：''' ===
+<pre># /tools/test/adv/camera/camera_rkaiq_test.sh 53</pre>
+[[File:ROM-6881 CN1.png|RTENOTITLE]]
+[[File:ROM-6881 CN1 2.png|RTENOTITLE]]
+=== '''Camera4：''' ===
+<pre># /tools/test/adv/camera/camera_rkaiq_test.sh 71</pre>
+[[File:ROM-6881 CN2.png|RTENOTITLE]]
+=== '''4-way camera test environment pictures and test methods.''' ===
+<pre># /tools/test/adv/camera/camera_rkaiq_test.sh 44 &
+# /tools/test/adv/camera/camera_rkaiq_test.sh 62 &
+# /tools/test/adv/camera/camera_rkaiq_test.sh 53 &
+# /tools/test/adv/camera/camera_rkaiq_test.sh 71 &</pre>
+[[File:ROM-6881 4-camera.png]]