Difference between revisions of "UIO-4030"
From ESS-WIKI
| Line 1: | Line 1: | ||
== '''接口布局和尺寸(Layout and Sizes)''' == | == '''接口布局和尺寸(Layout and Sizes)''' == | ||
| − | '''[[File:UIO-4030 photo 2021-10-27 141551.jpg]]''' | + | '''[[File:UIO-4030 photo 2021-10-27 141551.jpg|RTENOTITLE]]''' |
| − | [[File:UIO-4030 photo1 2021-10-27 141634.jpg]] | + | [[File:UIO-4030 photo1 2021-10-27 141634.jpg|RTENOTITLE]] |
| − | |||
| + | [[File:UIO-4030 photo3 2021-10-27 141714.jpg|RTENOTITLE]] | ||
== '''Specifications ''' == | == '''Specifications ''' == | ||
Revision as of 07:27, 27 October 2021
接口布局和尺寸(Layout and Sizes)
Specifications
測試方法:
Note: RS-232: /dev/ttymxc2
GPIO : need to connect loopback.
RS-485: pin1 data- & pin2 data+ (ttyUSB0)
RS-232
$ stty -F /dev/ttymxc2 -echo -onlcr 115200 crtscts $ cat /dev/ttymxc2 & $ echo "Serial Port Test" > /dev/ttymxc2
RS485 :
Test RS-485 with Adam-4520.
$ stty -F /dev/ttyUSB0 115200 $ echo "Serial Test" > /dev/ttyUSB0
GPIO
[EXTENSION I/O B] pin#5: gpio 121, pin#6: gpio 122 pin#7: gpio 123, pin#8: gpio 124 pin#9: gpio 125, pin#10: gpio 126 pin#11: gpio 127, pin#12: 133
=================================================================================================================================
Watch Dog
$ echo 1 > /dev/watchdog