Difference between revisions of "RSB-4710 user guide"

Revision as of 02:04, 11 May 2022

資源特性(Features)

• Rockchip RK3399 ARM Dual Cortex-A72 and Quad Cortex-A53 1.8 GHz
• Onboard 2GB LPDDR4 memory and 16GB eMMC
• Dual HDMI(4K 60fps + 1080P), 1 x eDP, 1 x dual channel LVDS, 1 x MIPI CSI
• Supports 4K H.264/H.265 video decoder
• 6 x serial, 1 x USB3.0, 4 x USB2.0 ,1 x USB OTG, 2 x GbE, 1 x SPI, 1 x I2C, 5 x GPIOs
• M.2 for WIFI/BT support, mini-PCIe for 3G/4G support
• Supports Debian9/10 and Android7.1/10.0

訂購資訊(Ordering Information)

更换一张RSB-4710订购咨询图片

Packing List

接口布局和尺寸(Layout and Sizes)

接口布局圖 Board Dimension Layout 

更换一张RSB-4710正面接口图

 Connector List

接口引脚定義 (Pin definitions)

• 电池扣（RTC）
• 串口（RS-232 (COM1)，RS-232/Debug Port (COM2/DEBUG)，RS-232/485 (COM56)，Internal RS-232 (COM34)）
• 显示接口（LVDS,LVDS_BL,EDP,HDMI）
• LAN接口（LAN1，LAN2）
• USB接口（USB1，Pin Header，OTG）
• 音频接口（Audio）
• Micro SD & Nano SIM Card
• 电源及指示灯和开关机复位按钮（DC Power，Power Button and LED）
• Mini PCIe & MIPI CSI 接口
• M.2接口
• GPIO接口
• SPI ，I2C接口
• RSB-4710 Jumper List

机械尺寸  (Mechanical Characteristics)

插一张RSB-4710机械尺寸图

快速入门 (Quick Start)

系统下载 (OS Download)

Debian 9 ：

Baidu link for Debian9 Password：dn35

Debian 10：

Baidu link for Debian10 Password：nvpp
Dropbox link for Debian10

Android 7.1.2

Baidu for Android 7.1.2   提取码：1r5f

RISC Platform (RSB4710/RSB4710Lite/ROM5780)

Android 10.0

Baidu for Android 10.0   提取码：muqf

RISC Platform (RSB4710/ROM5780)

Android &Debian 燒錄方法 (Android Flash eMMC Method) 

There are three ways to update images：

1._Using_AndroidToool.

There is no limitation by this way.

2._Using_storage（such sd_or_USB_disk）with_update.zip_in_it.

There are some limitations：

（1）The device must be able to boot up to Android system.

（2）Only update images from the same os,  eg : 

        Android6.0 upgrade to Android6.0 or Android7.1 upgrade to Android7.1.

（3）Using update.zip to upgrade. (see more detail in "Create OTA zip" on how to create update.zip)

3._Using_bootup_sd_disk made_by SDDiskTool.

（1）Only update images from the same os,  eg : 

         Android6.0 upgrade to Android6.0 or Android7.1 upgrade to Android7.1.

（2）Using update.img to upgrade.

Linux系统的基本使用(Linux System Basic Operating Method)

User Guide

RISC series(RSB-3710/RSB-4710/ROM-5780)

• Linux BSP User Guide for rk3399 series Debian9/Debian10
• Getting Start
• MAC_Address

DS-100 

• Linux BSP User Guide for rk3399 series Debian9
• Linux BSP User Guide for rk3399 series DeviceOn
• Linux BSP User Guide for SGI [DMS-SA53]

乙太網路使用方法(Ethernent Testing Method)

Command : ifconfig 

root@linaro-alip:~# ifconfig
docker0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 172.17.0.1  netmask 255.255.0.0  broadcast 172.17.255.255
        ether 02:42:83:27:77:c0  txqueuelen 0  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.127.101  netmask 255.255.255.0  broadcast 192.168.127.255
        inet6 fe80::e405:b000:5963:d697  prefixlen 64  scopeid 0x20<link>
        ether c6:ff:6c:34:9d:7d  txqueuelen 1000  (Ethernet)
        RX packets 23  bytes 7566 (7.3 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 45  bytes 5391 (5.2 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 24

eth1: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 96:a4:98:8d:52:09  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1  (Local Loopback)
        RX packets 484  bytes 32428 (31.6 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 484  bytes 32428 (31.6 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

Command : ping 192.168.127.101

root@linaro-alip:~# ping 192.168.127.101
PING 192.168.127.101 (192.168.127.101) 56(84) bytes of data.
64 bytes from 192.168.127.101: icmp_seq=1 ttl=64 time=0.221 ms
64 bytes from 192.168.127.101: icmp_seq=2 ttl=64 time=0.135 ms
64 bytes from 192.168.127.101: icmp_seq=3 ttl=64 time=0.134 ms
64 bytes from 192.168.127.101: icmp_seq=4 ttl=64 time=0.137 ms
64 bytes from 192.168.127.101: icmp_seq=5 ttl=64 time=0.137 ms
^C
--- 192.168.127.101 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 5ms
rtt min/avg/max/mdev = 0.134/0.152/0.221/0.037 ms
root@linaro-alip:~#

WiFi使用方法(WIFI Testing Method)

1.Click Settings

2.Turn on Wi-Fi

3.Choose ESSID (for example, Advantech for guest)

4.Input the password

5.Wi-Fi connected

4G使用方法(4G Testing Method)

蓝牙使用方法(BlueTooth Operating Method)

音訊使用方法(BlueTooth Operating Method)

I2C 測試( I2C Test method) 

看門狗測試 (Watch Dog Test method) 

攝像頭測試(Camera Test method) 

遠程訪問及文件傳輸(Remote Access and File Transimmion)​

通用方法(General Method)

      查看CPU温度(Check CPU Temperature)

root@linaro-alip:~# cat /sys/devices/virtual/thermal/thermal_zone0/temp   34444
# 或者直接以度爲單位顯示 echo $[$(cat /sys/class/thermal/thermal_zone0/temp)/1000]° >>> 37°

      查看CPU频率(Check CPU Frequency)

root@linaro-alip:~# cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
408000
root@linaro-alip:~# cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq
1416000

      查看内存容量(Check Memory Capacity)

root@linaro-alip:~# busybox free -m
              total        used        free      shared  buff/cache   available
Mem:           1961         269        1454          18         237        1696
Swap:             0           0           0

      查看存储容量(Check Storage Capacity)

root@imx8qxprom5620a1:/# busybox df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/root                13.4G      1.7G     11.1G  13% /
devtmpfs                395.8M      4.0K    395.8M   0% /dev
tmpfs                   876.4M         0    876.4M   0% /dev/shm
tmpfs                   876.4M     16.5M    859.9M   2% /run
tmpfs                   876.4M         0    876.4M   0% /sys/fs/cgroup
tmpfs                   876.4M      4.0K    876.4M   0% /tmp
tmpfs                   876.4M    280.0K    876.2M   0% /var/volatile
/dev/mmcblk0p2           13.6G      1.7G     11.3G  13% /run/media/mmcblk0p2
/dev/mmcblk0p1           63.9M     23.4M     40.5M  37% /run/media/mmcblk0p1
/dev/mmcblk1p1           63.9M     23.4M     40.5M  37% /run/media/mmcblk1p1
tmpfs                   175.3M     88.0K    175.2M   0% /run/user/0
root@imx8qxprom5620a1:/#

設置RTC (RTC Setting) 

 Disable RTC sync service
# systemctl disable ntpd.service
 
# systemctl stop systemd-timesyncd
# systemctl stop ntpdate.service
 
Set system time to current, then write to RTC
# date 040710522021 && hwclock -w && date
 
Set incorrect time, then read time from RTC
# date 010100002000 && hwclock -r && date
 
Restart the RTC time to system time
# hwclock -s && date

QT 安装步骤

Qt5Creator_toolchain_Qt_5.11.3