Difference between revisions of "ROM-5780 user guide Android 10"

Revision as of 07:09, 18 May 2023

資源特性(Features)

Rockchip RK3399 Arm dual Cortex-A72 and quad Cortex-A53 1.8 GHz
Onboard 2GB LPDDR4 memory and 16GB eMMC
Support HDMI2.0 4K 60fps, 1x DP, 1x eDP, 1 x LVDS
Support 4K H.264/H.265 Video decoder
2 x USB3.0, 3 x USB2.0,1 x USB2,0 OTG, 3 x UART, 12 x GPIO
1 x PCIe2.0, 1 x SATA, 1 x 4-lane MIPI CSI, Gigabit LAN
Support Debian Linux and Android

簡介（Introduction）

Advantech ROM-5780 SMARC 2.1 Computer-on-Module is powered by Rockchip RK3399 SOC which includes dual-core Arm Cortex-A72 and quad-core Arm Cortex-A53 processors
and Arm Mali-T860MP4 3D graphics engine. It provides rich display interface: HDMI 4K@60Hz, eDP and LVDS to meet different requirement. It also features USB3.0, PCIe 2.0, SATA,
Gigabit Ethernet, MIPI-CSI for embedded applications. It is the ideal solution for POS, vending, infotainment, Medical.
ROM-5780 is paired with the Advantech ROM-DB5901 SMARC2.0 development board for faster end product peripheral integration and time-to-market. The reference schematics and
layout checklist documentations for carrier board development will be provided along with the open-sourced Linux BSP, test utilities, hardware design utilities and reference drivers.

訂購資訊(Ordering Information)

規格（Specifications）

框圖（Block Diagram）

接口布局和尺寸(Layout and Sizes)

ROM-5780 接口布局圖 Board Dimension Layout

Board Connectors

The board has one switch that allows you to configure your system.

Connector List

Switch

Position	Description
SW1	UART & Debug Port selection
SW2	AT & ATX mode selection

SW1: UART & Debug Port Selection

Setting	Function
SW1(2-3)	Normal UART
SW1(2-1)	Debug Console (Default)

SW2: AT/ATX Mode Selection

Setting	Function
SW2(2-3)	AT Mode (Default)
SW2(2-1)	ATX Mode

ROM-DB5901 接口布局圖 Board Dimension Layout

主板内置插针式引脚排序方式 (Pin Header defination)

Internal I/O

Position	Description	Connector Type
BAT1	PIN Header for Battery	WAFER 8P 2.54mm 180D(M) DIP A2543WV2-8P
BH1	RTC Battery Holder	BATTERY HOLDER 24.923.48.9 CR2032 BH800.4GG
CAN1	CANBus Port 1	BOX HEADER 5x2P 2.54mm 180D(M) DIP 23N6960-10S10
CAN2	CANBus Port 2	BOX HEADER 5x2P 2.54mm 180D(M) DIP 23N6960-10S10
COM1	COM Port 1	BOX HEADER 5x2P 2.54mm 180D(M) DIP 23N6960-10S10
COM3	COM Port 3 (Debug Port)	BOX HEADER 5x2P 2.54mm 180D(M) DIP 23N6960-10S10
CN4	PCIex1 Connector 1	PCIEXPRESS 36P 180D(F) DIP 2EG01817-D2D-DF
CN5	PCIex1 Connector 2	PCIEXPRESS 36P 180D(F) DIP 2EG01817-D2D-DF
CN6	PCIex1 Connector 3	PCIEXPRESS 36P 180D(F) DIP 2EG01817-D2D-DF
CN11	SATA Connector	Serial ATA 7P 1.27mm 180D(M) DIP WATM-07DBN4A3B8
CN12	SATA Power Connector	WAFER 4P 2.5mm 180D(M) DIP 24W1161-04S10-01T
CN22	GPIOx8 sets	PIN HEADER 10x2P 2.0mm 180D(M) DIP 21N22050
CN25	MXM 3.0 Connector	MXM Conn. 314P 90D(F) SMD AS0B821-S78B-7H
CN26	M.2 Key E Slots	NGFF 75P 0.5mm 90D(F) H=4.2mm SMD AS0BC21-S40BE
CN38	FAN (Reserved)	WTB Con. 3P 2.54mm 180D(M) DIP A2543WV0-3P-6T-5e
CN39	MIPI-CSI1 (FPC, 4-Lane	FPC 39P, 0.6mm, H0.9mm
CN40	MIPI-CSI0 (FPC, 2-Lane)	FPC 39P, 0.6mm, H0.9mm
CN41	MIPI-CSI0 (Mini-SAS, 2-Lane)	Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/ S/BK/W
CN42	MIPI-CSI1 (Mini-SAS, 4-Lane)	Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/ S/BK/W
ESPI_CN1	ESPI	PIN HEADER 6x2P 2.0mm180D(M) SMD 21N22050-12M00B
I2C_GP_1	I2C Pin Header	WAFER BOX 4P 2.00mm 180D(M) DIP 721-81-04TW00
I2C_CN3	Audio Codec Board	PIN HEADER 2x10P 2.54mm 180D(M) DIP 21N22564
LVDS0	LVDS0	Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/ S/WH/W
LVDS_BK_PWR	LVDS0 Back Light	WAFER BOX 5P 2.0mm 180D(M) DIP A2001WV2-5P
LVDS1	LVDS1	Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/ S/WH/W
LVDS1_BK_PWR	LVDS1 Back Light	WAFER BOX 5P 2.0mm 180D(M) DIP A2001WV2-5P
SD1	SD Card Slot	SD CARD 9P 90D(F) SMD WK2192CS3D- 7H
SPI_CN1	SPI Pin Header	PIN HEADER 4x2P 2.54mm 180D(M) SMD 21N22564
SW2	Reset Button	TACT SW STS-091 SMD 4P H=3.8mm
SW4	SLP Button	TACT SW STS-091 SMD 4P H=3.8mm
SW5	Power Button	TACT SW STS-091 SMD 4P H=3.8mm
USB0_OTG1	USB OTG	Micro USB 5P/0.65mm/(F)/NY9T/GFL/ RA/S/BK/B
USB-4-5	USB Port 4, Port 5	PIN HEADER 2x5P 2.0mm 180D(M) SMD 21N22050

Rear I/O

Position	Description	Name
DCIN	DC Jack	A
CN15A	UART Port 0	B
CN15B	UART Port 2	C
CN1A	DP Port	D
CN1B	HDMI Port	E
CN33	Type C Controller Programming Header (Reserved Only)	F
CN34	USB Type C	G
CN8	GbE Ethernet Connector Port	H
CN3	USB Port 1/ 2	I
Audio1	MIC Input/ Audio Output	J

接口引脚定義 (Pin definitions)

机械尺寸 (Mechanical Characteristics)

Dimensions: SMARC form factor size: (D x W) 82 x 50 mm/ 3.22 x 1.9 in
Height on Top: Under 3.0 mm base on SPEC definition (without heat sink)
Height on Bottom: Under 1.3 mm base on SPEC definition

快速入门 (Quick Start)

系统下载 (OS Download)

Android 10

百度网盘链接：

Image Version	Product	Date	Release	Release Note	Binary OS Image Name

Android 燒錄方法 (Android Flash eMMC Method)

There are three ways to update images：

1. Using_storage_USB disk with AndroidTool.

There is no limitation by this way.

2. Using bootup_sd_disk made_by SDDiskTool.

（1）Only update images from the same os, eg :

Android6.0 upgrade to Android6.0 or Android7.1 upgrade to Android7.1.

（2）Using update.img to upgrade.

User Guide

Android 10

Android BSP User Guide for ROM-5780 series Android 10
Getting Start
MAC_Address

@@ Line 352: / Line 352: @@
 &nbsp;
@@ Line 362: / Line 363: @@
 There is no limitation by this way.
+&nbsp;
 === [[2._Using_bootup_sd_disk_made_by_SDDiskTool.|<u>'''<span style="color:#2980b9">2. Using bootup_sd_disk made_by SDDiskTool.</span>'''</u>]] ===
@@ Line 370: / Line 372: @@
 （2）Using update.img to upgrade.
+== '''User Guide''' ==
+'''Android 10'''
+*Android BSP User Guide for ROM-5780 series Android 10
+*Getting Start
+*MAC_Address