EPC-R4710 user guide
Contents
- 1 資源特性(Features)
- 2 訂購資訊(Ordering Information)
- 3 Packing List
- 4 接口布局和尺寸(Layout and Sizes)
- 5 Connector List
- 6 快速入门 (Quick Start)
- 7 Android &Debian 燒錄方法 (Android Flash eMMC Method)
- 8 Linux系统的基本使用(Linux System Basic Operating Method)
- 9 通用方法(General Method)
- 9.1 乙太網路使用方法(Ethernent Testing Method)
- 9.2 查看CPU温度(Check CPU Temperature)
- 9.3 查看CPU频率(Check CPU Frequency)
- 9.4 查看内存容量(Check Memory Capacity)
- 9.5 查看存储容量(Check Storage Capacity)
- 9.6 設置RTC (RTC Setting)
- 9.7 WiFi使用方法(WIFI Testing Method)
- 9.8 4G使用方法(4G Testing Method)
- 9.9 蓝牙使用方法(BlueTooth Operating Method)
- 9.10 音訊使用方法(BlueTooth Operating Method)
- 9.11 I2C 測試( I2C Test method)
- 9.12 看門狗測試 (Watch Dog Test method)
- 9.13 攝像頭測試(Camera Test method)
- 9.14 遠程訪問及文件傳輸(Remote Access and File Transimmion)
- 10 QT 安装步骤
資源特性(Features)
- Rockchip RK3399 ARM Dual Cortex-A72 and Quad Cortex-A53 1.8 GHz
- Onboard 2GB LPDDR4 memory and 16GB eMMC
- Dual HDMI(4K 60fps + 1080P)
- Support 4K H.264/H.265 Video decoder
- 6 serial, 1 USB3.0, 4 USB2.0 ,1 USB OTG, 2 GbE, 1 SPI, 1 I2C, 5 GPIO
- M.2 for WIFI/BT support, mini-PCIe for 3G/4G support
- Support Linux and Android
訂購資訊(Ordering Information)
插入一张ECP-4710的订购咨询
Packing List
| Part Number | Description |
| EPC-R4710 | EPC-R4710 Box computer |
| 1960083394N001 | VESA MOUNT BKT 2U2X EPC-R4710 |
接口布局和尺寸(Layout and Sizes)
External I/O
插入一张外壳结构图片
接口布局圖 Board Dimension Layout
Connector List
| AUDIO | Audio pin header |
| EDP | EDP CONN |
| LVDS | LVDS CONN |
| BL | LVDS BKL CONN |
| CSI | CSI CONN |
| MINIPCIE | MINI PCIe 52P |
| SIM | Nano SIM card |
| M2 | M.2 CONN |
| SD | SD slot |
| BTN | Power button and LED |
| DCIN1 | 12V DC jack |
| COM1 | COM1 |
| COM2/Debug | COM2 |
| HDMI1 | HDMI1 CONN |
| HDMI2 | HDMI2 CONN |
| USB1 | USB Type A (USB 3.0 and 2.0) |
| USB2 | USB pin header |
| USB3 | USB pin header |
| LAN1 | LAN1 |
| LAN2 | LAN2 |
| BAT | RTC CONN |
| COM56 | COM5 and COM6 with RS-232 or RS-485 |
| COM34 | COM3 and COM4 with RS-232 |
| OTG | USB |
| RST | Reset button |
| CN3 | GPIO CONN |
| CN1 | SPI |
| CN2 | I2C |
接口引脚定義 (Pin definitions)
- 电池扣（RTC）
- 串口（RS-232 (COM1)，RS-232/Debug Port (COM2/DEBUG)，RS-232/485 (COM56)，Internal RS-232 (COM34)）
- 显示接口（LVDS,LVDS_BL,EDP,HDMI）
- LAN接口（LAN1，LAN2）
- USB接口（USB1，Pin Header，OTG）
- 音频接口（Audio）
- Micro SD & Nano SIM Card
- 电源及指示灯和开关机复位按钮（DC Power，Power Button and LED）
- Mini PCIe & MIPI CSI 接口
- M.2接口
- GPIO接口
- SPI ，I2C接口
- RSB-4710 Jumper List
机械尺寸 (Mechanical Characteristics)
插入一张外壳机构图
快速入门 (Quick Start)
系统下载 (OS Download)
Debian 9 ：
Baidu link for Debian9 Password：dn35
|
Image Version |
Product |
Date |
Release |
Release Note |
Binary OS Image Name |
|
DIV10030 |
RSB-4710 |
2020-12-11 |
Alpha |
RSB4710A2AIM20DIV10030_2020-12-11.img.tgz |
Debian 10：
Baidu link for Debian10 Password：nvpp
Dropbox link for Debian10
|
Image Version |
Product |
Date |
Release |
Release Note |
Binary OS Image Name |
|
DIV251012 |
RSB-4710 |
2021-04-14 |
Beta |
RSB4710A2AIM20DIV251012_2021-04-14.img.tgz |
Android 7.1.2
Baidu for Android 7.1.2 提取码：1r5f
RISC Platform (RSB4710/RSB4710Lite/ROM5780)
|
Android version |
Git BSP Tag Version |
Product |
CPU |
Date |
Release |
Release Note |
Binary OS Image Name |
Checksum File Name |
|
7.1.2 |
V1180 |
RSB-4710 |
rk3399 |
2020-08-27 |
MP |
|
RK3399_N7_AIV1180_rsb_4710_2020-08-27.tar.gz
|
RK3399_N7_AIV1180_rsb_4710_2020-08-27.tar.gz.md5 |
| 7.1.2 | V1190 | RSB-4710-lite | rk3399 | 2020-08-28 | MP | RK3399_N7_AIV1190_rsb_4710li_2020-08-28.tar.gz | RK3399_N7_AIV1190_rsb_4710li_2020-08-28.tar.gz.md5 |
Android 10.0
Baidu for Android 10.0 提取码：muqf
RISC Platform (RSB4710/ROM5780)
|
Android version |
Git BSP Tag Version |
Product |
CPU |
Date |
Release |
Release Note |
Binary OS Image Name |
Checksum File Name |
|
10.0 |
V1002 |
RSB-4710 |
rk3399 |
2021-04-14 |
Beta |
|
RK3399_Q10_AIV1002_rsb_4710_2021-04-14.tar.gz
|
RK3399_Q10_AIV1002_rsb_4710_2021-04-14.tar.gz.md5 |
Android &Debian 燒錄方法 (Android Flash eMMC Method)
There are three ways to update images：
1._Using_AndroidToool.
There is no limitation by this way.
2._Using_storage（such sd_or_USB_disk）with_update.zip_in_it.
There are some limitations：
（1）The device must be able to boot up to Android system.
（2）Only update images from the same os, eg :
Android6.0 upgrade to Android6.0 or Android7.1 upgrade to Android7.1.
（3）Using update.zip to upgrade. (see more detail in "Create OTA zip" on how to create update.zip)
3._Using_bootup_sd_disk made_by SDDiskTool.
（1）Only update images from the same os, eg :
Android6.0 upgrade to Android6.0 or Android7.1 upgrade to Android7.1.
（2）Using update.img to upgrade.
Linux系统的基本使用(Linux System Basic Operating Method)
User Guide
RISC series(RSB-3710/RSB-4710/ROM-5780)
DS-100
- Linux BSP User Guide for rk3399 series Debian9
- Linux BSP User Guide for rk3399 series DeviceOn
- Linux BSP User Guide for SGI [DMS-SA53]
通用方法(General Method)
乙太網路使用方法(Ethernent Testing Method)
Command : ifconfig
root@linaro-alip:~# ifconfig docker0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255 ether 02:42:83:27:77:c0 txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.127.101 netmask 255.255.255.0 broadcast 192.168.127.255 inet6 fe80::e405:b000:5963:d697 prefixlen 64 scopeid 0x20<link> ether c6:ff:6c:34:9d:7d txqueuelen 1000 (Ethernet) RX packets 23 bytes 7566 (7.3 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 45 bytes 5391 (5.2 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 24 eth1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether 96:a4:98:8d:52:09 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1 (Local Loopback) RX packets 484 bytes 32428 (31.6 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 484 bytes 32428 (31.6 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Command : ping 192.168.127.101
root@linaro-alip:~# ping 192.168.127.101 PING 192.168.127.101 (192.168.127.101) 56(84) bytes of data. 64 bytes from 192.168.127.101: icmp_seq=1 ttl=64 time=0.221 ms 64 bytes from 192.168.127.101: icmp_seq=2 ttl=64 time=0.135 ms 64 bytes from 192.168.127.101: icmp_seq=3 ttl=64 time=0.134 ms 64 bytes from 192.168.127.101: icmp_seq=4 ttl=64 time=0.137 ms 64 bytes from 192.168.127.101: icmp_seq=5 ttl=64 time=0.137 ms ^C --- 192.168.127.101 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 5ms rtt min/avg/max/mdev = 0.134/0.152/0.221/0.037 ms root@linaro-alip:~#
查看CPU温度(Check CPU Temperature)
root@linaro-alip:~# cat /sys/devices/virtual/thermal/thermal_zone0/temp 34444 # 或者直接以度爲單位顯示 echo $[$(cat /sys/class/thermal/thermal_zone0/temp)/1000]° >>> 37°
查看CPU频率(Check CPU Frequency)
root@linaro-alip:~# cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq 408000 root@linaro-alip:~# cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq 1416000
查看内存容量(Check Memory Capacity)
root@linaro-alip:~# busybox free -m total used free shared buff/cache available Mem: 1961 269 1454 18 237 1696 Swap: 0 0 0
查看存储容量(Check Storage Capacity)
root@linaro-alip:~# df -h Filesystem Size Used Avail Use% Mounted on /dev/root 7.9G 2.6G 4.9G 35% / devtmpfs 973M 8.0K 973M 1% /dev tmpfs 981M 0 981M 0% /dev/shm tmpfs 981M 8.9M 972M 1% /run tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 981M 0 981M 0% /sys/fs/cgroup /dev/mmcblk1p10 6.4G 3.8M 6.4G 1% /userdata /dev/mmcblk1p7 63M 13M 48M 21% /oem tmpfs 197M 8.0K 197M 1% /run/user/1000 tmpfs 197M 0 197M 0% /run/user/0 root@linaro-alip:~#
設置RTC (RTC Setting)
root@linaro-alip:~# date Wed May 11 01:12:06 UTC 2022 root@linaro-alip:~# date -s "2022-5-11 09:12:00" Wed May 11 09:12:00 UTC 2022 root@linaro-alip:~# date Wed May 11 09:12:06 UTC 2022 root@linaro-alip:~# hwclock -w root@linaro-alip:~# hwclock 2022-05-11 09:12:17.266424+00:00
WiFi使用方法(WIFI Testing Method)
1.Click Settings
2.Turn on Wi-Fi
3.Choose ESSID (for example, Advantech for guest)
4.Input the password
5.Wi-Fi connected