RSB-4710 user guide

1 產品介紹(Product introduction )
- 1.1 產品特性(Product Features)
- 1.2 產品官網連結(Product official website link)
2 硬件接口說明(Hardware interface introduction)
- 2.1 接口布局和尺寸(Layout and Sizes)
- 2.2 接口布局圖 Board Dimension Layout
3 Connector List
- 3.1 接口引脚定義 (Pin definitions)
- 3.2 机械尺寸 (Mechanical Characteristics)
4 快速入门 (Quick Start)
- 4.1 系统下载 (OS Download)
5 Debian 燒錄方法 (Android Flash eMMC Method)
6 Linux系统的基本使用(Linux System Basic Operating Method)
- 6.1 User Guide
7 通用方法(General Method)
8 QT 安装步骤
9 How to build Debian 9 & 10 BSP (Debian 9 & 10 BSP 編譯)

產品介紹(Product introduction )

產品特性(Product Features)

Rockchip RK3399 ARM Dual Cortex-A72 and Quad Cortex-A53 1.8 GHz
Onboard 2GB LPDDR4 memory and 16GB eMMC
Dual HDMI(4K 60fps + 1080P), 1 x eDP, 1 x dual channel LVDS, 1 x MIPI CSI
Supports 4K H.264/H.265 video decoder
6 x serial, 1 x USB3.0, 4 x USB2.0 ,1 x USB OTG, 2 x GbE, 1 x SPI, 1 x I2C, 5 x GPIOs
M.2 for WIFI/BT support, mini-PCIe for 3G/4G support
Supports Debian9/10 and Android7.1/10.0

產品官網連結(Product official website link)

RSB-4710

硬件接口說明(Hardware interface introduction)

接口布局和尺寸(Layout and Sizes)

接口布局圖 Board Dimension Layout

Connector List

AUDIO	Audio pin header
EDP	EDP CONN
LVDS	LVDS CONN
BL	LVDS BKL CONN
CSI	CSI CONN
MINIPCIE	MINI PCIe 52P
SIM	Nano SIM card
M2	M.2 CONN
SD	SD slot
BTN	Power button and LED
DCIN1	12V DC jack
COM1	COM1
COM2/Debug	COM2
HDMI1	HDMI1 CONN
HDMI2	HDMI2 CONN
USB1	USB Type A (USB 3.0 and 2.0)
USB2	USB pin header
USB3	USB pin header
LAN1	LAN1
LAN2	LAN2
BAT	RTC CONN
COM56	COM5 and COM6 with RS-232 or RS-485
COM34	COM3 and COM4 with RS-232
OTG	USB
RST	Reset button
CN3	GPIO CONN
CN1	SPI
CN2	I2C

接口引脚定義 (Pin definitions)

机械尺寸 (Mechanical Characteristics)

快速入门 (Quick Start)

系统下载 (OS Download)

Note： LIV=Yocto Linux, UIV=Ubuntu, DIV=Debian, AIV=Android

LBV=BSP, LIV=Image
Debian 10：

Platform	Product	Image Version	Release Date	Release Version	Release notes	Image Download	BSP Download Tag	Comment
RK3399	RSB-4710	DIV251029	2022/03/15	GA	Release_Note	Baidu Password：a887 Dropbox	RK3399_RISC_DIV251029.xml	MP Version

Debian 9 ：

Platform	Product	Image Version	Release Date	Release Version	Release notes	Image Download	BSP Download Tag	Comment
RK3399	RSB-4710	DIV10030	2020/12/11	Alpha	Release_Note	Baidu Password：a887 Dropbox	RK3399_RISC_DIV10030.xml

Alpha: Basic I/O function bring up by RD;

Beta: Basic I/O function、performance and middleware verified by RD. Peripherals integrated;

GA: Beta version by QE verification;

RTM: Beta version by SI/Power/QE verification and pre-loaded;

Using AndroidTool: AndroidTool

Debian 燒錄方法 (Android Flash eMMC Method)

There are three ways to update images：

1._Using_AndroidToool.

There is no limitation by this way.

2._Using_storage（such sd_or_USB_disk）with_update.zip_in_it.

There are some limitations：

（1）The device must be able to boot up to Android system.

（2）Only update images from the same os, eg :

Android6.0 upgrade to Android6.0 or Android7.1 upgrade to Android7.1.

（3）Using update.zip to upgrade. (see more detail in "Create OTA zip" on how to create update.zip)

3._Using_bootup_sd_disk made_by SDDiskTool.

（1）Only update images from the same os, eg :

Android6.0 upgrade to Android6.0 or Android7.1 upgrade to Android7.1.

（2）Using update.img to upgrade.

Linux系统的基本使用(Linux System Basic Operating Method)

User Guide

RISC series(RSB-3710/RSB-4710/ROM-5780)

DS-100

通用方法(General Method)

乙太網路使用方法(Ethernent Testing Method)

Command : ifconfig

root@linaro-alip:~# ifconfig
docker0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 172.17.0.1  netmask 255.255.0.0  broadcast 172.17.255.255
        ether 02:42:83:27:77:c0  txqueuelen 0  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.127.101  netmask 255.255.255.0  broadcast 192.168.127.255
        inet6 fe80::e405:b000:5963:d697  prefixlen 64  scopeid 0x20<link>
        ether c6:ff:6c:34:9d:7d  txqueuelen 1000  (Ethernet)
        RX packets 23  bytes 7566 (7.3 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 45  bytes 5391 (5.2 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 24

eth1: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 96:a4:98:8d:52:09  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1  (Local Loopback)
        RX packets 484  bytes 32428 (31.6 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 484  bytes 32428 (31.6 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

Command : ping 192.168.127.101

root@linaro-alip:~# ping 192.168.127.101
PING 192.168.127.101 (192.168.127.101) 56(84) bytes of data.
64 bytes from 192.168.127.101: icmp_seq=1 ttl=64 time=0.221 ms
64 bytes from 192.168.127.101: icmp_seq=2 ttl=64 time=0.135 ms
64 bytes from 192.168.127.101: icmp_seq=3 ttl=64 time=0.134 ms
64 bytes from 192.168.127.101: icmp_seq=4 ttl=64 time=0.137 ms
64 bytes from 192.168.127.101: icmp_seq=5 ttl=64 time=0.137 ms
^C
--- 192.168.127.101 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 5ms
rtt min/avg/max/mdev = 0.134/0.152/0.221/0.037 ms
root@linaro-alip:~#

查看CPU温度(Check CPU Temperature)

root@linaro-alip:~# cat /sys/devices/virtual/thermal/thermal_zone0/temp   34444
# 或者直接以度爲單位顯示 echo $[$(cat /sys/class/thermal/thermal_zone0/temp)/1000]° >>> 37°

查看CPU频率(Check CPU Frequency)

root@linaro-alip:~# cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
408000
root@linaro-alip:~# cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq
1416000

查看内存容量(Check Memory Capacity)

root@linaro-alip:~# busybox free -m
              total        used        free      shared  buff/cache   available
Mem:           1961         269        1454          18         237        1696
Swap:             0           0           0

查看存储容量(Check Storage Capacity)

root@linaro-alip:~# df -h
Filesystem       Size  Used Avail Use% Mounted on
/dev/root        7.9G  2.6G  4.9G  35% /
devtmpfs         973M  8.0K  973M   1% /dev
tmpfs            981M     0  981M   0% /dev/shm
tmpfs            981M  8.9M  972M   1% /run
tmpfs            5.0M  4.0K  5.0M   1% /run/lock
tmpfs            981M     0  981M   0% /sys/fs/cgroup
/dev/mmcblk1p10  6.4G  3.8M  6.4G   1% /userdata
/dev/mmcblk1p7    63M   13M   48M  21% /oem
tmpfs            197M  8.0K  197M   1% /run/user/1000
tmpfs            197M     0  197M   0% /run/user/0
root@linaro-alip:~#

設置RTC (RTC Setting)

root@linaro-alip:~# date
Wed May 11 01:12:06 UTC 2022
root@linaro-alip:~# date -s "2022-5-11 09:12:00"
Wed May 11 09:12:00 UTC 2022
root@linaro-alip:~# date
Wed May 11 09:12:06 UTC 2022
root@linaro-alip:~# hwclock -w
root@linaro-alip:~# hwclock
2022-05-11 09:12:17.266424+00:00

WiFi使用方法(WIFI Testing Method)

1.Click Settings

2.Turn on Wi-Fi

3.Choose ESSID (for example, Advantech for guest)

4.Input the password

5.Wi-Fi connected

4G使用方法(4G Testing Method)

蓝牙使用方法(BlueTooth Operating Method)

音訊使用方法(BlueTooth Operating Method)

Record: record audio to 1.wav file

arecord -f cd -d 10 -t wav 1.wav

Play: play the 1.wav file

aplay -Dplughw:0,0 1.wav

Connect audio cable from PC to RSB-4710 Mic-in or Line-in

Play audio on the PC and ensure there is audio output.

Connect Lien-out with head phone to check if there is an audio output from the RSB-4710 Line-out:

Mic-in:

arecord -f cd -t wav | aplay -Dplughw:0,0 -t wav

Line-in:

Switch to line-in:

amixer -c0 cset name="RECMIXL BST3 Switch" 1