EPC-R5710 Yocto4.0 user guide

From ESS-WIKI
Jump to: navigation, search

产品介绍(Product Presentation)

产品特性(product feature)

  • NXP i.MX 8M PLUS 4xA53@1.8GHz
  • Integrate 2.3 TOPS NPU and extend 8-26 TOPS AI card
  • 4kP30,1080p60 HEVC, H.264, VP9, VP8 decoding
  • 1080p60 H.265, H.264 encoding
  • 1xHDMI2.0
  • 5xGbE LAN, 1xGbE Fiber
  • USB3.0,USB2.0,RS232,RS485,CAN FD,SATA,SD
  • 8 Channels Mic Array
  • Support AI card/5G/4G/GPS/ Wi-Fi 5/Wi-Fi6/BT
  • Support TPM,TCM
  • Linux and, Andriod
  • Embeded DeviceOn, DeviceOn.CommBridge

 

产品官网链接(Product official website link)

EPC-R5710 - NXP i.MX 8M Plus AI edge intelligent System - Advantech

接口布局和尺寸(Layout and Sizes)

External I/O

RTENOTITLE

接口布局圖 Board Dimension Layout

I/O

RTENOTITLE

EPC-R5710 IO 1.png

硬件接口说明(Hardware interface description)

Connector List

  1. DC Power Jack(DC-IN)
  2. USB Ports
  3. LAN Ports
  4. HDMI
  5. CAN
  6. RS232&DEBUG
  7. SIM&SD
  8. Reset
  9. Recovery
  10. GPIO
  11. I2S/I2C

 

快速入门(Quick Start)

系统下载(Yocto 3.0 OS Dowload)

Note:  LIV= Yocto Linux, UIV=Ubuntu, DIV = Debian, AIV=Android

             LBV=BSP, LIV= Image

             LIV9=Yocto-2.5, LIVA=Yocto-3.0, LIVB=Yocto-3.3, LIVC=Yocto-4.0 , LIVD=Yocto-4.1……

[ Downloads_imx8_5.15.52_2.1.0.tar.gz ]
[ Dropbox link for imx8 Yocto 4.0 Image ]
Product Image Version Release Date Release Version Release notes Image Download BSP Download Tag Comment SDK Module Test Report
EPC-R5710 VC0076 2024-06-06 Beta Release note

Baidu      Password:a887

Dropbox

imx8LBVC0076.xml Yocto4.0 , 2/4/6 G for Beta SDK Module Test Report

Note: LIV= Yocto Linux, UIV=Ubuntu, DIV = Debian, AIV=Android

LBV=BSP, LIV= Image

LIV9=Yocto2.5, LIVA=Yocto3.0, LIVB=Yocto 3.3……

  • Alpha: Basic I/O function bring up by RD;
  • Beta: Basic I/O function、performance and middleware verified by RD. Peripherals integrated;
  • GA: Beta version by QE verification;
  • RTM: Beta version by SI/Power/QE verification and pre-loaded

Linux烧录方式(Linux Falsh eMMC Method)

Device routes and test

eMMC: /dev/mmcblk2
SD: /dev/mmcblk1
QSPI1: /dev/mtd0
For example: SD test

# dd if=/dev/urandom of=data bs=1 count=1024
# dd if=/dev/mmcblk1 of=backup bs=1 count=1024 skip=4096
# dd if=data of=/dev/mmcblk1 bs=1 seek=4096
# dd if=/dev/mmcblk1 of=data1 bs=1 count=1024 skip=4096
# diff data data1
# dd if=backup of=/dev/mmcblk1 bs=1 seek=4096

Install the system from SD card

1. Copy imx-image-full-imx8mpepcr5710a1-xxxxxx.rootfs.sdcard package to your desk- top.
2. Insert SD card to PC.
3. Make a bootable SD card. For example, the node of an SD card is /dev/sdv

 # umount /dev/sdv*
 # dd if=./imx-image-full-imx8mpepcr5710a1-xxxx.rootfs.sdcard of=/dev/sdv bs=1M  ;sync

4.Insert SD card and copy imx-image-full-imx8mpepcr5710a1-xxxxxx.rootfs.sdcard to USB disk.
5. Insert USB disk and SD card then boot the whole system from SD card by changing SW1 to 1-2 ON, 3-4 OFF.
6. Enter usb disk folder, make a bootable emmc

# cd /run/media/sda1/
# umount /dev/mmcblk2*
# dd if=./imx-image-full-imx8mpepcr5710a1-xxxx.rootfs.sdcard of=/dev/mmcblk2 bs=1M ;sync

Button for System Recovery With SD Card

Function: used to upgrade or use the operating system in the SD card;
Operation method: press the recovery button, plug in the power supply, power on the machine, press it for 2 seconds, and start it from the SD card;
After starting from the SD card, whether the customer needs to upgrade or use the SD card system is customized by the customer (by modifying the files in the SD card)

RTENOTITLE

Liunx基本使用方法

AI Test_Internal NPU

Extend AI Card

Display_HDMI

Audio

Mini-PCIE:4G(EC20CEFHLG)

M.2 KEY-E:WiFi5/6

M.2 KEY-B:5G

Serial Port(RS-232、RS-422、RS-485)

I2C & TPM

SATA hard disk interface

USB

RTC

Ethernet

GPIO

Watchdog

CANBus or CAN-FD

BSP/Linux编译

Yocto Linux BSP User Guide for EPC-R5710 series -Yocot4.0