EPC-R5710 user guide
Contents
产品介绍（Product Presentation）
产品特性（product feature）
- NXP i.MX 8M PLUS 4xA53@1.8GHz
- Integrate 2.3 TOPS NPU and extend 8-26 TOPS AI card
- 4kP30,1080p60 HEVC, H.264, VP9, VP8 decoding
- 1080p60 H.265, H.264 encoding
- 1xHDMI2.0
- 5xGbE LAN, 1xGbE Fiber
- USB3.0,USB2.0,RS232,RS485,CAN FD,SATA,SD
- 8 Channels Mic Array
- Support AI card/5G/4G/GPS/ Wi-Fi 5/Wi-Fi6/BT
- Support TPM,TCM
- Linux and, Andriod
- Embeded DeviceOn, DeviceOn.CommBridge
产品官网链接（Product official website link）
EPC-R5710 - NXP i.MX 8M Plus AI edge intelligent System - Advantech
接口布局和尺寸(Layout and Sizes)
External I/O
接口布局圖 Board Dimension Layout
I/O
硬件接口说明（Hardware interface description）
Connector List
快速入门（Quick Start）
系统下载（Yocto 3.0 OS Dowload）
Note： LIV= Yocto Linux, UIV=Ubuntu, DIV = Debian, AIV=Android
LBV=BSP, LIV= Image
LIV9=Yocto2.5, LIVA=Yocto3.0, LIVB=Yocto 3.3……
| Product | Image Version | Release Date | Release Version | Release notes | Image Download | BSP Download Tag | Comment | SDK | Module | Test Report |
| EPC-R5710 | VA1055 | 2023/07/09 | RTM | Release_Note |
Baidu Password：a887 |
imx8LBVA1055.xml |
4G RTM |
SDK | Modules | Test Report |
| EPC-R5710 | VA1054 | 2023/07/09 | RTM | Release_Note |
Baidu Password：a887 |
imx8LBVA1054.xml |
2G RTM 6G RTM |
SDK | Modules | Test Report |
Note： LIV= Yocto Linux, UIV=Ubuntu, DIV = Debian, AIV=Android
LBV=BSP, LIV= Image
LIV9=Yocto2.5, LIVA=Yocto3.0, LIVB=Yocto 3.3……
- Alpha: Basic I/O function bring up by RD;
- Beta: Basic I/O function、performance and middleware verified by RD. Peripherals integrated;
- GA: Beta version by QE verification;
- RTM: Beta version by SI/Power/QE verification and pre-loaded
Linux烧录方式（Linux Falsh eMMC Method）
Device routes and test
eMMC: /dev/mmcblk2
SD: /dev/mmcblk1
QSPI1: /dev/mtd0
For example: SD test
# dd if=/dev/urandom of=data bs=1 count=1024 # dd if=/dev/mmcblk1 of=backup bs=1 count=1024 skip=4096 # dd if=data of=/dev/mmcblk1 bs=1 seek=4096 # dd if=/dev/mmcblk1 of=data1 bs=1 count=1024 skip=4096 # diff data data1 # dd if=backup of=/dev/mmcblk1 bs=1 seek=4096
Install the system from SD card
1. Copy imx-image-full-imx8mpepcr5710a1-xxxxxx.rootfs.sdcard package to your desk- top.
2. Insert SD card to PC.
3. Make a bootable SD card. For example, the node of an SD card is /dev/sdv
# umount /dev/sdv* # dd if=./imx-image-full-imx8mpepcr5710a1-xxxx.rootfs.sdcard of=/dev/sdv bs=1M ;sync
4.Insert SD card and copy imx-image-full-imx8mpepcr5710a1-xxxxxx.rootfs.sdcard to USB disk.
5. Insert USB disk and SD card then boot the whole system from SD card by changing SW1 to 1-2 ON, 3-4 OFF.
6. Enter usb disk folder, make a bootable emmc
# cd /run/media/sda1/ # umount /dev/mmcblk2* # dd if=./imx-image-full-imx8mpepcr5710a1-xxxx.rootfs.sdcard of=/dev/mmcblk2 bs=1M ;sync
Button for System Recovery With SD Card
