Difference between revisions of "Display Setting（ROM-5880）"
From ESS-WIKI
Xingxing.li (talk | contribs) (Created page with " === '''Multi-display''' === ROM-5880 supports 4 x display ports — HDMI, eDP (Option), MIPI and LVDS. Only two ports work simultaneously.<br/> HDMI, eDP, MIPI can only set...") |
Xingxing.li (talk | contribs) |
||
| Line 3: | Line 3: | ||
ROM-5880 supports 4 x display ports — HDMI, eDP (Option), MIPI and LVDS. Only two ports work simultaneously.<br/> HDMI, eDP, MIPI can only set to display0 or display1.<br/> LVDS1 can only set to display1 or display2.<br/> LVDS and MIPI are alternative. | ROM-5880 supports 4 x display ports — HDMI, eDP (Option), MIPI and LVDS. Only two ports work simultaneously.<br/> HDMI, eDP, MIPI can only set to display0 or display1.<br/> LVDS1 can only set to display1 or display2.<br/> LVDS and MIPI are alternative. | ||
| + | |||
=== '''Enter U-boot interrupt mode''' === | === '''Enter U-boot interrupt mode''' === | ||
| Line 13: | Line 14: | ||
Afterwards you can input the following command to configure Multi-Display settings. | Afterwards you can input the following command to configure Multi-Display settings. | ||
| + | |||
| + | === '''Single Display''' === | ||
| | ||
Revision as of 06:36, 11 September 2023
Multi-display
ROM-5880 supports 4 x display ports — HDMI, eDP (Option), MIPI and LVDS. Only two ports work simultaneously.
HDMI, eDP, MIPI can only set to display0 or display1.
LVDS1 can only set to display1 or display2.
LVDS and MIPI are alternative.
Enter U-boot interrupt mode
Connect device to debug port, and open debug console.
Press "ctrl + c" key before activating the device, wait until you see the following information on debug console:
Hit any key to stop autoboot: 0 => <INTERRUPT> =>
Afterwards you can input the following command to configure Multi-Display settings.
Single Display