Difference between revisions of "MCU/WISE-1570-FirmwareUpdate-For-BC95"
| Line 3: | Line 3: | ||
== Running CCS installer == | == Running CCS installer == | ||
| − | '''Step01:''' Prepare boards.<br/>Note: If you want to get pin-definition detailed, please get in touch with the contact person from ADVANTECH. | + | '''Step01:''' Prepare boards include WISE-1570, WISE-ED22 and micro-USB cable.<br/>Note: If you want to get pin-definition detailed for rework as below, please get in touch with the contact person from ADVANTECH. |
[[File:Wise1570 nbiot firmware update 01.png|center|500px|Wise1570_nbiot_firmware_update_01.png]]<br/>[[File:Wise1570 nbiot firmware update 02.png|center|500px|Wise1570_nbiot_firmware_update_02.png]] | [[File:Wise1570 nbiot firmware update 01.png|center|500px|Wise1570_nbiot_firmware_update_01.png]]<br/>[[File:Wise1570 nbiot firmware update 02.png|center|500px|Wise1570_nbiot_firmware_update_02.png]] | ||
| − | '''Step02:''' Check the number of COM port detected from PC.<br/>Note: If you don't setup WISE-ED22 before, please refer to | + | |
| + | |||
| + | '''Step02:''' Check the number of COM port detected from PC.<br/>The device will be visible in the Device Manager as below after driver installed.<br/>Note: If you don't setup WISE-ED22 before, please refer to [[WISE-ED22_User_Manual|WISE-ED22]] for it firstly. | ||
[[File:Wise1570 nbiot firmware update 03.png|center|300px|Wise1570_nbiot_firmware_update_03.png]] | [[File:Wise1570 nbiot firmware update 03.png|center|300px|Wise1570_nbiot_firmware_update_03.png]] | ||
| − | '''Step03:''' Find batch file “Codeloader-Erase.bat”, | + | |
| + | |||
| + | '''Step03:''' Find the batch file “Codeloader-Erase.bat”, modify some parameters as red box below in it and to save it.<br/>Note: If you don't have programming tool "Code Loader", please get in touch with the contact person from ADVANTECH. | ||
[[File:Wise1570 nbiot firmware update 04.png|center|300px|Wise1570_nbiot_firmware_update_04.png]] | [[File:Wise1570 nbiot firmware update 04.png|center|300px|Wise1570_nbiot_firmware_update_04.png]] | ||
| + | Set the com port and path for Code Loader installation. <br/>“COMPORT” : the number of com port deteced from PC.<br/>“CODELOADER” : the path where the Code Loader is installed.<br/><br/>[[File:Wise1570 nbiot firmware update 05.png|center|600px|Wise1570_nbiot_firmware_update_05.png]] | ||
| − | |||
| − | '''Step04:''' | + | '''Step04:''' Double click "Codeloader-Erase.bat" and press 'SW1" of WISE-ED22 to start erasing flash with BC95. |
[[File:Wise1570 nbiot firmware update 06.png|center|500px|Wise1570_nbiot_firmware_update_06.png]] | [[File:Wise1570 nbiot firmware update 06.png|center|500px|Wise1570_nbiot_firmware_update_06.png]] | ||
| Line 27: | Line 31: | ||
[[File:Wise1570 nbiot firmware update 11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]] | [[File:Wise1570 nbiot firmware update 11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]] | ||
| − | '''Step05:''' Find batch file | + | |
| + | |||
| + | '''Step05:''' Find the batch file “CodeLoadBC95HA.bat”, modify some parameters as red box below in it and to save it. | ||
[[File:Wise1570 nbiot firmware update 07.png|center|300px|Wise1570_nbiot_firmware_update_07.png]] | [[File:Wise1570 nbiot firmware update 07.png|center|300px|Wise1570_nbiot_firmware_update_07.png]] | ||
| + | |||
| + | |||
| + | |||
| + | Set the com port, bnad and path for Code Loader installation.<br/>“COMPORT” : the number of com port deteced from PC.<br/>“BAND”: 800 (for Band 20), 850 (for Band 5) or 900 (for Band 8),<br/>“CODELOADER” : the path where the Code Loader is installed. | ||
[[File:Wise1570 nbiot firmware update 08.png|center|600px|Wise1570_nbiot_firmware_update_08.png]] | [[File:Wise1570 nbiot firmware update 08.png|center|600px|Wise1570_nbiot_firmware_update_08.png]] | ||
| − | '''Step06:''' | + | |
| + | |||
| + | '''Step06:''' Double click "CodeLoadBC95HA.bat" and press 'SW1" of WISE-ED22 to start upgrading firmware with BC95. | ||
[[File:Wise1570 nbiot firmware update 09.png|center|500px|Wise1570_nbiot_firmware_update_09.png]] | [[File:Wise1570 nbiot firmware update 09.png|center|500px|Wise1570_nbiot_firmware_update_09.png]] | ||
Revision as of 08:27, 7 September 2017
Introduction
Running CCS installer
Step01: Prepare boards include WISE-1570, WISE-ED22 and micro-USB cable.
Note: If you want to get pin-definition detailed for rework as below, please get in touch with the contact person from ADVANTECH.
Step02: Check the number of COM port detected from PC.
The device will be visible in the Device Manager as below after driver installed.
Note: If you don't setup WISE-ED22 before, please refer to WISE-ED22 for it firstly.
Step03: Find the batch file “Codeloader-Erase.bat”, modify some parameters as red box below in it and to save it.
Note: If you don't have programming tool "Code Loader", please get in touch with the contact person from ADVANTECH.
“COMPORT” : the number of com port deteced from PC.
“CODELOADER” : the path where the Code Loader is installed.
Step04: Double click "Codeloader-Erase.bat" and press 'SW1" of WISE-ED22 to start erasing flash with BC95.
Step05: Find the batch file “CodeLoadBC95HA.bat”, modify some parameters as red box below in it and to save it.
Set the com port, bnad and path for Code Loader installation.
“COMPORT” : the number of com port deteced from PC.
“BAND”: 800 (for Band 20), 850 (for Band 5) or 900 (for Band 8),
“CODELOADER” : the path where the Code Loader is installed.
Step06: Double click "CodeLoadBC95HA.bat" and press 'SW1" of WISE-ED22 to start upgrading firmware with BC95.
