Difference between revisions of "MCU/WISE-1570-FirmwareUpdate-For-BC95"
| Line 1: | Line 1: | ||
| − | = | + | = Please follow steps to firmware update = |
| − | |||
| − | |||
'''Step01:''' Prepare boards include WISE-1570, WISE-ED22 and micro-USB cable.<br/>Note: If you want to get pin-definition detailed for rework as below, please get in touch with the contact person from ADVANTECH. | '''Step01:''' Prepare boards include WISE-1570, WISE-ED22 and micro-USB cable.<br/>Note: If you want to get pin-definition detailed for rework as below, please get in touch with the contact person from ADVANTECH. | ||
| Line 19: | Line 17: | ||
[[File:Wise1570 nbiot firmware update 04.png|center|300px|Wise1570_nbiot_firmware_update_04.png]] | [[File:Wise1570 nbiot firmware update 04.png|center|300px|Wise1570_nbiot_firmware_update_04.png]] | ||
| − | Set the com port and path for Code Loader installation. <br/>“COMPORT” : the number of com port deteced from PC.<br/>“CODELOADER” : the path where the Code Loader is installed.<br/><br/>[[File:Wise1570 nbiot firmware update 05.png|center|600px|Wise1570_nbiot_firmware_update_05.png]] | + | Set the com port and path for Code Loader installation.<br/>“COMPORT” : the number of com port deteced from PC.<br/>“CODELOADER” : the path where the Code Loader is installed.<br/><br/>[[File:Wise1570 nbiot firmware update 05.png|center|600px|Wise1570_nbiot_firmware_update_05.png]] |
| Line 39: | Line 37: | ||
| − | Set the com port, bnad and path for Code Loader installation.<br/>“COMPORT” : the number of com port deteced from PC.<br/>“BAND”: 800 (for Band 20), 850 (for Band 5) or 900 (for Band 8),<br/>“CODELOADER” : the path where the Code Loader is installed. | + | Set the com port, bnad and path for Code Loader installation.<br/>“COMPORT” : the number of com port deteced from PC.<br/>“BAND”: 800 (for Band 20), 850 (for Band 5) or 900 (for Band 8),<br/>“CODELOADER” : the path where the Code Loader is installed. |
[[File:Wise1570 nbiot firmware update 08.png|center|600px|Wise1570_nbiot_firmware_update_08.png]] | [[File:Wise1570 nbiot firmware update 08.png|center|600px|Wise1570_nbiot_firmware_update_08.png]] | ||
Revision as of 08:30, 7 September 2017
Please follow steps to firmware update
Step01: Prepare boards include WISE-1570, WISE-ED22 and micro-USB cable.
Note: If you want to get pin-definition detailed for rework as below, please get in touch with the contact person from ADVANTECH.
Step02: Check the number of COM port detected from PC.
The device will be visible in the Device Manager as below after driver installed.
Note: If you don't setup WISE-ED22 before, please refer to WISE-ED22 for it firstly.
Step03: Find the batch file “Codeloader-Erase.bat”, modify some parameters as red box below in it and to save it.
Note: If you don't have programming tool "Code Loader", please get in touch with the contact person from ADVANTECH.
“COMPORT” : the number of com port deteced from PC.
“CODELOADER” : the path where the Code Loader is installed.
Step04: Double click "Codeloader-Erase.bat" and press 'SW1" of WISE-ED22 to start erasing flash with BC95.
Step05: Find the batch file “CodeLoadBC95HA.bat”, modify some parameters as red box below in it and to save it.
Set the com port, bnad and path for Code Loader installation.
“COMPORT” : the number of com port deteced from PC.
“BAND”: 800 (for Band 20), 850 (for Band 5) or 900 (for Band 8),
“CODELOADER” : the path where the Code Loader is installed.
Step06: Double click "CodeLoadBC95HA.bat" and press 'SW1" of WISE-ED22 to start upgrading firmware with BC95.
