Difference between revisions of "MCU/WISE-1570-FirmwareUpdate-For-BC95"
Line 1: | Line 1: | ||
= Please follow steps to firmware update = | = Please follow steps to firmware update = | ||
− | '''Step01:''' Prepare boards include WISE-1570, WISE-ED22 and micro-USB cable.<br/>Note: If you want to get pin-definition detailed for rework as below, please get in touch with the contact person from ADVANTECH. | + | '''Step01:''' Prepare boards include WISE-1570, WISE-ED22 and micro-USB cable.<br/>Note: If you want to get pin-definition detailed for H/W rework as below, please get in touch with the contact person from ADVANTECH. |
[[File:Wise1570 nbiot firmware update 01.png|center|500px|Wise1570_nbiot_firmware_update_01.png]]<br/>[[File:Wise1570 nbiot firmware update 02.png|center|500px|Wise1570_nbiot_firmware_update_02.png]] | [[File:Wise1570 nbiot firmware update 01.png|center|500px|Wise1570_nbiot_firmware_update_01.png]]<br/>[[File:Wise1570 nbiot firmware update 02.png|center|500px|Wise1570_nbiot_firmware_update_02.png]] |
Revision as of 08:31, 7 September 2017
Please follow steps to firmware update
Step01: Prepare boards include WISE-1570, WISE-ED22 and micro-USB cable.
Note: If you want to get pin-definition detailed for H/W rework as below, please get in touch with the contact person from ADVANTECH.
Step02: Check the number of COM port detected from PC.
The device will be visible in the Device Manager as below after driver installed.
Note: If you don't setup WISE-ED22 before, please refer to WISE-ED22 for it firstly.
Step03: Find the batch file “Codeloader-Erase.bat”, modify some parameters as red box below in it and to save it.
Note: If you don't have programming tool "Code Loader", please get in touch with the contact person from ADVANTECH.
“COMPORT” : the number of com port deteced from PC.
“CODELOADER” : the path where the Code Loader is installed.
Step04: Double click "Codeloader-Erase.bat" and press 'SW1" of WISE-ED22 to start erasing flash with BC95.
Step05: Find the batch file “CodeLoadBC95HA.bat”, modify some parameters as red box below in it and to save it.
Set the com port, bnad and path for Code Loader installation.
“COMPORT” : the number of com port deteced from PC.
“BAND”: 800 (for Band 20), 850 (for Band 5) or 900 (for Band 8),
“CODELOADER” : the path where the Code Loader is installed.
Step06: Double click "CodeLoadBC95HA.bat" and press 'SW1" of WISE-ED22 to start upgrading firmware with BC95.