Latest revision as of 04:52, 16 January 2025

產品介紹(Product introduction )

產品特性(Product Features)

Qualcomm 8 Kryo cores up to 2.7GHz
Onboard LPDDR5 8GB, 8533MT/s memory
Onboard 128GB UFS and 128GB eMMC
1x 2ch. LVDS, 1x DP and 1x HDMI for displays
2x USB3.2 Gen1, 2x USB2.0, 2x PCIe Gen3.0 x1, 2x 4wire UART, 1x SPI,16x GPIO, 1x I2C, 2x MIPI-CSI x4
1x Micro SD and 1x Nano SIM
Support Windows 11 IoT Enterprise

產品官網連結(Product official website link)

ROM-2860

硬件接口說明(Hardware interface introduction)

接口布局和尺寸(Layout and Sizes)

EPC-R2860 接口布局圖 Board Dimension Layout

SW6

主板内置插针式引脚排序方式 (Pin Header defination)

Internal I/O, Jummper/Switch List:

Position	Description

快速入門 (Quick Start)

系统下载 (OS Download)

Yocto 4.0 :

SW1

SW1(1-off,2-on) : eMMC boot
SW1(1-on,2-on) : UFS boot

SW2

SW2(1-on): Forced Recovery
SW2(1-off): Normal Boot
SW2(2-on): AT mode
SW2(2-off):ATx mode

Recovery & Rescue 燒錄方法 (Recovery & Rescue method)

1. Download the Qualcomm Software Center

Qualcomm® Software Center

2. Open the Qualcomm Software Center

3. Search "PCAT" in the search bar

4. Click Qualcomm® Product Configuration Assistant Tool

5. Select Qualcomm® Product Configuration Assistant Tool version

Version: 2.33.2.119

6. Install Qualcomm® Product Configuration Assistant Tool 2.33.2.119

7. Search "QUTS" in the search bar

8. Click the Qualcomm® Unified Tools Services

9. Select Qualcomm® Unified Tools Services version

Version : 1.75.2.9

10. Install Qualcomm® Unified Tools Services 1.75.2.9

11. You will find the new application in your Windows system .

12. Unzip the UFS File and eMMC File

For example :

2860A1AIM38LIV11026_2024-11-17_ufs.tgz

2860A1AIM38LIV11026_2024-11-17_emmc.tgz

13 Connect your device via Micro USB.

14. if your pc can not identify the USB , please download the "'Qualcomm USB Driver"

15. Search " Qualcomm USB Driver " in the search bar , then install the driver.

Reformat

For confirmation, we will erase the partition before UFS installation.

1. Select provision button

2. Add the prog_firehose_ddr.elf and provision_ufs31.xml in UFS folder.

3. Then press "OK" , it will start to do USF Provision.

4. When the Provision finished , you can see the result in message window.

Flash UFS

1. Change the SW1 and SW2

Flash UFS: the SW1 switch to 1-on, 2-on Forced Recovery : The SW2 switch to 1-on ,2 - on .

2. Turn on the power

3. Open " PCATApp" Tool

4. Click " Connect A Device"

5. Select "Qualcomm HS-USB QDLoader 9008 (COM11)

6. Click " Connect " device

7. When you connected successfully , it will show "qreen word" - Qualcomm HS-USB QDLoader 9008 (COM 11)

8. Select UFS Folder in PCAT Tool , the Tool will help load Files automatically and Select "MEMORY_TYPE_UFS"

9. Click " Download"

10. UFS Download Status

11. UFS Donwload compeleted

12. When you finish the download process , please change the switch.

Flash UFS: the SW1 switch to 1-off, 2-off Forced Recovery : The SW2 switch to 1-on ,2 - on.

Flash eMMC

1. Turn off the Power

2. Change the SW1 and SW2

Flash eMMC: the SW1 switch to 1-off, 2-on Forced Recovery : The SW2 switch to 1-on ,2 - on .

3. Turn on the power

4. Make sure the device connection status.

5. If the device disconnect with PCAT Tool , please connect it again.

6. Select eMMC Folder.

7. Make sure the setting ,then press " Download " button.

8. eMMC downlaoad status

9. eMMC Donwload compeleted

10. When the eMMC installation finished . Close the PCAT tool ,

11 pleaes remove the mirco usb cable, turn off the power

12. eMMC boot up : SW1 switch to 1-off, 2-on Forced Recovery : The SW2 switch to 1-off ,2 - off .

13. Connect debug cable and open the terminal , turn on the power .

14. If you have done " Reformat " , the message will show " DDR: Start of DDR Training Init "

15. When the systme boot up , you need to type " qcs6490-rom2860a1 login: root " , " Password: oelinux123"

16. After type the long in and password , and you also can chek the image information about date , kernel version etc..

Linux BSP編譯方法(Linux BSP Compile Method)

Yocto 4.0

Difference between revisions of "ROM-2860 Yocto user guide"

Latest revision as of 04:52, 16 January 2025

Contents

產品介紹(Product introduction )

產品特性(Product Features)

產品官網連結(Product official website link)

硬件接口說明(Hardware interface introduction)

接口布局和尺寸(Layout and Sizes)

EPC-R2860 接口布局圖 Board Dimension Layout

主板内置插针式引脚排序方式 (Pin Header defination)

Internal I/O, Jummper/Switch List:

快速入門 (Quick Start)

系统下载 (OS Download)

Recovery & Rescue 燒錄方法 (Recovery & Rescue method)

Reformat

Flash UFS

Flash eMMC

Linux BSP編譯方法(Linux BSP Compile Method)

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools

@@ Line 1: / Line 1: @@
-&nbsp;
+== {{DISPLAYTITLE:AOM-2721 Yocto user guide}}'''產品介紹(Product introduction )''' ==
-== '''產品介紹(Product introduction )''' ==
 === '''產品特性(Product Features)''' ===
@@ Line 16: / Line 14: @@
 === '''產品官網連結(Product official website link)''' ===
-'''&nbsp;TBD'''
+'''&nbsp;[https://www.advantech.com/zh-tw/products/8fc6f753-ca1d-49f9-8676-10d53129570f/rom-2860/mod_f875a23e-6bbc-4149-a874-b278384283c9 ROM-2860]'''
 &nbsp;
@@ Line 24: / Line 22: @@
 === '''接口布局和尺寸(Layout and Sizes)''' ===
-=== '''EPC-R2860&nbsp;接口布局圖 Board Dimension Layout''' ===
+'''[[File:EPC-R2860 cover sizeS.png|RTENOTITLE]]'''
+'''[[File:ROM-2860 layout functions top s.PNG|RTENOTITLE]]'''
-&nbsp; '''SW1'''
+'''[[File:ROM-2860 layout functions buttom s.PNG|RTENOTITLE]]'''
-*'''SW1(1-off,2-on)&nbsp;: eMMC boot'''
+'''[[File:ROM-2860 layout functions switchsetting ss.png|RTENOTITLE]]'''
-*'''SW1(1-on,2-on)&nbsp;: UFS boot'''
-'''SW2'''
+=== '''EPC-R2860&nbsp;接口布局圖 Board Dimension Layout''' ===
-*'''SW2(1-on): Forced Recovery'''
+&nbsp;
-*'''SW2(1-off): Normal Boot'''
-*'''SW2(2-on): AT mode'''
-*'''SW2(2-off):ATx mode'''
 '''SW6'''
@@ Line 59: / Line 55: @@
 === '''系统下载 (OS Download)''' ===
-*'''Linux系统 (Linux OS)''''''&nbsp; &nbsp;'''
+'''Yocto 4.0&nbsp;:&nbsp;&nbsp;'''
+'''SW1'''
+*'''SW1(1-off,2-on)&nbsp;: eMMC boot'''
+*'''SW1(1-on,2-on)&nbsp;: UFS boot'''
-'''Yocto 4.0&nbsp;:&nbsp;&nbsp;'''
+'''SW2'''
-&nbsp;
+*'''SW2(1-on): Forced Recovery'''
+*'''SW2(1-off): Normal Boot'''
+*'''SW2(2-on): AT mode'''
+*'''SW2(2-off):ATx mode'''
 == '''Recovery & Rescue&nbsp;燒錄方法 (Recovery & Rescue method)''' ==
@@ Line 115: / Line 119: @@
 '''13&nbsp;Connect your device via Micro USB.'''
-'''<span style="background-color:#ffff00;">14. if your pc can not identify the USB , please download the "</span>''''''<span style="background-color:#ffff00;">Qualcomm USB Driver"&nbsp;</span>'''
+'''<span style="background-color:#ffff00;">14. if your pc can not identify the USB , please download the "</span>'<span style="background-color:#ffff00;">Qualcomm USB Driver"&nbsp;</span>'''
-'''<span style="background-color:#ffff00;">15. Search "&nbsp;Qualcomm USB Driver "&nbsp;</span>''''''<span style="background-color:#ffff00;">in the search bar , then install the driver.&nbsp;</span>'''
+'''<span style="background-color:#ffff00;">15. Search "&nbsp;Qualcomm USB Driver "&nbsp;</span>''<span style="background-color:#ffff00;">in the search bar , then install the driver.&nbsp;</span>'''''
-[[File:ROM-2860 search bar usb driver.PNG]]
+[[File:ROM-2860 search bar usb driver.PNG|RTENOTITLE]]
 === '''<u>Reformat</u>&nbsp;&nbsp;''' ===
-'''<span style="background-color:#ffff00;">For confirmation, we will erase the partition before UFS and eMMC installation.&nbsp;</span>'''
+'''<span style="background-color:#ffff00;">For confirmation, we will erase the partition before UFS installation.&nbsp;</span>'''
 '''1. Select&nbsp; provision button&nbsp;&nbsp;&nbsp;[[File:ROM-2860 provision file button.PNG|RTENOTITLE]]&nbsp;&nbsp;'''
-[[File:ROM-2860 provision file icon.PNG|RTENOTITLE]]
+[[File:ROM-2860 provision file icon yocto.PNG|RTENOTITLE]]
 '''2. Add the&nbsp;prog_firehose_ddr.elf and&nbsp;provision_ufs31.xml in UFS&nbsp;&nbsp;folder.&nbsp;'''
-[[File:ROM-2860 provision file.PNG|RTENOTITLE]]
+[[File:ROM-2860 provision clean.PNG|RTENOTITLE]]
 '''3. Then press "OK" , it will start to do USF Provision.&nbsp;'''
@@ Line 139: / Line 143: @@
 '''4. When the Provision finished , you can see the result in message window.&nbsp;'''
-[[File:ROM-2860 provision file result.PNG|RTENOTITLE]]
+[[File:ROM-2860 provision log yocto.PNG|RTENOTITLE]]
 === '''<u>Flash UFS</u>''' ===
@@ Line 155: / Line 159: @@
 [[File:ROM-2860 PCAT UFS .PNG|RTENOTITLE]]
-'''5. Select&nbsp; "Qualcomm HS-USB QDLoader 9008 (COM6)&nbsp;'''
+'''5. Select&nbsp; "Qualcomm HS-USB QDLoader 9008 (COM11)&nbsp;'''
-[[File:ROM-2860 PCAT Tool Select device.PNG|RTENOTITLE]]
+[[File:ROM-2860 comport connect 0 yocto.PNG|RTENOTITLE]]
 '''6. Click " Connect "&nbsp; device&nbsp;'''
-[[File:ROM-2860 PCAT Tool Connect device.PNG|RTENOTITLE]]
+[[File:ROM-2860 comport connect 1 yocto.PNG|RTENOTITLE]]
-'''7. When you connected successfully , it will show&nbsp; "qreen word" - Qualcomm HS-USB QDLoader 9008 (COM 6)&nbsp;'''
+'''7. When you connected successfully , it will show&nbsp; "qreen word" - Qualcomm HS-USB QDLoader 9008 (COM 11)&nbsp;'''
-[[File:ROM-2860 PCAT UFS connectiondevice.PNG|RTENOTITLE]]
+[[File:ROM-2860 comport connect 2 yocto.PNG|RTENOTITLE]]
 '''8. Select UFS Folder in PCAT Tool , the Tool will help load Files automatically and Select "MEMORY_TYPE_UFS"&nbsp;'''
-[[File:ROM-2860 PCAT Select UFS File .PNG|RTENOTITLE]]
+[[File:ROM-2860 UFS 0 yocto.PNG|RTENOTITLE]]
 '''9. Click " Download"&nbsp;'''
-[[File:ROM-2860 PCAT Select UFS File Download.png|RTENOTITLE]]
+[[File:ROM-2860 UFS download yocto.PNG|RTENOTITLE]]
 '''10. UFS Download Status&nbsp;'''
-'''[[File:ROM-2860 PCAT Select UFS File Download status.png|RTENOTITLE]]11. UFS Donwload compeleted&nbsp;'''
+'''[[File:ROM-2860 UFS download 1 yocto.PNG|RTENOTITLE]]'''
+'''11. UFS Donwload compeleted&nbsp;'''
+[[File:ROM-2860 UFS download done yocto.PNG|RTENOTITLE]]
+'''<span style="background-color:#ffff00;">12. When you finish the download process , please change the switch.</span>'''
-'''[[File:ROM-2860 PCAT Select UFS File Download status 100.png|RTENOTITLE]]'''
+'''&nbsp; &nbsp; &nbsp; &nbsp; <span style="background-color:#ffff00;">Flash UFS:&nbsp; the SW1 switch to 1-off, 2-off&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Forced Recovery&nbsp;:&nbsp; The SW2 switch to 1-on&nbsp; ,2 - on.</span>'''
+&nbsp;
-=== '''Flash eMMC''' ===
+=== <u>'''Flash eMMC'''</u> ===
 '''1.&nbsp; Turn off the Power&nbsp;'''
@@ Line 195: / Line 207: @@
 '''5.&nbsp;If the device disconnect with PCAT Tool , please connect it again.&nbsp;'''
-[[File:ROM-2860 PCAT Tool Connect device.PNG|RTENOTITLE]]
+[[File:ROM-2860 comport connect 0 yocto.PNG|RTENOTITLE]]
+&nbsp;
 '''6. Select eMMC Folder.'''
-'''[[File:ROM-2860 PCAT Select eMMC File.png|RTENOTITLE]]7. Make sure the setting ,then press " Download " button.'''
+[[File:ROM-2860 emmc 0 yocto.PNG|RTENOTITLE]]
+'''7. Make sure the setting ,then press " Download " button.'''
-[[File:ROM-2860 PCAT check eMMC setting download1.png|RTENOTITLE]]
+[[File:ROM-2860 emmc 1 download yocto.PNG|RTENOTITLE]]
 '''&nbsp;8. eMMC downlaoad status&nbsp;'''
-[[File:ROM-2860 PCAT Select eMMC File Download status.png|RTENOTITLE]]
+[[File:ROM-2860 emmc 2 download yocto.PNG|RTENOTITLE]]
-'''&nbsp;9. eMMC D''''''onwload compeleted&nbsp;'''
+'''9. eMMC Donwload compeleted&nbsp;'''
-[[File:ROM-2860 PCAT Select eMMC File Download status 100.png|RTENOTITLE]]
+[[File:ROM-2860 emmc 3 download yocto.PNG|RTENOTITLE]]
 '''10. When the eMMC installation finished . Close the PCAT tool ,'''
@@ Line 215: / Line 231: @@
 '''11 pleaes remove the mirco usb cable, turn off the power&nbsp;'''
-'''12.'''&nbsp;'''eMMC boot up&nbsp;:&nbsp; SW1 switch to 1-off, 2-on&nbsp;&nbsp; &nbsp; &nbsp;Forced Recovery&nbsp;:&nbsp;<span style="background-color:#ffff00;">&nbsp;The SW2 switch to 1-off&nbsp; ,2 - on .&nbsp;</span>'''
+'''12.'''&nbsp;'''eMMC boot up&nbsp;:&nbsp; SW1 switch to 1-off, 2-on&nbsp;&nbsp; &nbsp; &nbsp;Forced Recovery&nbsp;:&nbsp;<span style="background-color:#ffff00;">&nbsp;The SW2 switch to 1-off&nbsp; ,2 - off&nbsp;.&nbsp;</span>'''
 '''13. Connect debug cable and open the terminal ,&nbsp;&nbsp;turn on the power .&nbsp;'''
@@ Line 225: / Line 241: @@
 '''16.&nbsp; After type the long in and password , and you also can chek the image information about date , kernel version etc..&nbsp;'''
-'''[[File:ROM-2860 login system.PNG|RTENOTITLE]]'''
+[[File:ROM-2860 emmc boot yocto.PNG|RTENOTITLE]]
-== '''Fastboot''' ==
-*Micro USB: ROM-ED92 USB0
-Connect&nbsp;the ROM-ED92 USB0 to host computer and set the Micro USB to&nbsp;'''peripheral'''&nbsp;mode.
-<pre># echo "peripheral" > /sys/devices/platform/soc/a600000.ssusb/mode</pre>
-&nbsp;
-=== '''Enter the fastboot mode''' ===
-<pre>adv@adv-desktop:~$ adb devices
-List of devices attached
-e8c656e        device
-adv@adv-desktop:~$ adb root
-restarting adbd as root
-adv@adv-desktop:~$ adb reboot bootloader
-adv@adv-desktop:~$ fastboot devices
-e8c656e        fastboot</pre>
-&nbsp;
-=== '''Use the fastboot to flash the kernel boot image''' ===
-<pre>adv@adv-desktop:~$ fastboot flash boot_a qti-ubuntu-robotics-image-qcs6490-odk-boot.img
-target reported max download size of 805306368 bytes
-sending 'boot_a' (24420 KB)...
-OKAY [  0.790s]
-writing 'boot_a'...
-OKAY [  0.144s]
-finished. total time: 0.935s
-adv@adv-desktop:~$ fastboot flash boot_b qti-ubuntu-robotics-image-qcs6490-odk-boot.img
-target reported max download size of 805306368 bytes
-sending 'boot_b' (24420 KB)...
-OKAY [  0.827s]
-writing 'boot_b'...
-OKAY [  0.133s]
-finished. total time: 0.960s</pre>
-&nbsp;
-=== '''Use the fastboot to flash the kernel dtbo image''' ===
+== '''Linux&nbsp;BSP編譯方法(Linux&nbsp;BSP Compile Method)&nbsp;''' ==
-<pre>adv@adv-desktop4:~$ fastboot flash dtbo_a dtbo.img
-target reported max download size of 805306368 bytes
-sending 'dtbo_a' (12330 KB)...
-OKAY [  0.427s]
-writing 'dtbo_a'...
-OKAY [  0.070s]
-finished. total time: 0.497s
-adv@adv-desktop4:~$ fastboot flash dtbo_b dtbo.img
+[https://ess-wiki.advantech.com.tw/view/AIM-Linux/BSP/Qualcomm/RISC_QCS_Yocto_LE1.1_ROM2860 '''Yocto 4.0''']
-target reported max download size of 805306368 bytes
-sending 'dtbo_b' (12330 KB)...
-OKAY [  0.422s]
-writing 'dtbo_b'...
-OKAY [  0.061s]
-finished. total time: 0.483s</pre>