Difference between revisions of "MCU/WISE-1570-FirmwareUpdate-For-BC95"

From ESS-WIKI
Jump to: navigation, search
 
(7 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
= Introduction =  
+
= Please follow steps to firmware update =
  
−
== Running CCS installer ==
+
'''Step01:''' Prepare boards include WISE-1570 and WISE-ED22,<br/>'''①&nbsp;'''Connect WISE-1570 to WISE-ED22 by FPC 10 pin cable.<br/>'''② '''Connect&nbsp;WISE-ED22 to PC by micro-USB cable.<br/>'''③ '''If you want to get pin-definition detailed for H/W rework as below, please get in touch with the contact person from ADVANTECH.
  
−
'''Step01:''' Prepare boards.<br/>Note: If you want to get pin-definition detailed, please get in touch with the contact person from ADVANTECH.
+
[[File:Wise1570 nbiot firmware update 01.png|center|500px|Wise1570_nbiot_firmware_update_01.png]]<br/>[[File:Wise1570 nbiot firmware update 02.png|center|500px|Wise1570_nbiot_firmware_update_02.png]]
  
−
[[File:Wise1570 nbiot firmware update 01.png|center|500px|Wise1570_nbiot_firmware_update_01.png]]<br/>[[File:Wise1570 nbiot firmware update 02.png|center|500px|Wise1570_nbiot_firmware_update_02.png]]<br>
 
  
−
'''Step02:''' Check the number of COM port detected from PC.<br/>Note: If you don't setup WISE-ED22 before, please refer to link for it firstly.
 
  
−
[[File:Wise1570 nbiot firmware update 03.png|center|300px|Wise1570_nbiot_firmware_update_03.png]]<br>
 
  
−
'''Step03:''' Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95.<br/>Note: If you don't have programming tool "Codeloader", please get in touch with the contact person from ADVANTECH.
+
 
 +
'''Step02:''' Check the number of COM port detected from PC.<br/>The device will be visible in the Device Manager as below after driver installed.<br/>Note: If you don't setup WISE-ED22 before, please refer to [[WISE-ED22_User_Manual|WISE-ED22]] for it firstly.
 +
 
 +
[[File:Wise1570 nbiot firmware update 03.png|center|300px|Wise1570_nbiot_firmware_update_03.png]]
 +
 
 +
 
 +
 
 +
 
 +
 
 +
'''Step03:''' Find the batch file “Codeloader-Erase.bat”, modify some parameters as red box below in it and to save it.<br/>Note: If you don't have programming tool "Code Loader", please get in touch with the contact person from ADVANTECH.
  
 
[[File:Wise1570 nbiot firmware update 04.png|center|300px|Wise1570_nbiot_firmware_update_04.png]]
 
[[File:Wise1570 nbiot firmware update 04.png|center|300px|Wise1570_nbiot_firmware_update_04.png]]
  
−
[[File:Wise1570 nbiot firmware update 05.png|center|600px|Wise1570_nbiot_firmware_update_05.png]] <br>
+
Set the COM port and path for Code Loader installation.<br/>“COMPORT”&nbsp;: the number of com port deteced from PC.<br/>“CODELOADER”&nbsp;: the path where the Code Loader is installed.<br/><br/>[[File:Wise1570 nbiot firmware update 05.png|center|600px|Wise1570_nbiot_firmware_update_05.png]]
 +
 
 +
 
 +
 
  
−
'''Step04:''' Reset.
+
 
 +
 
 +
 
 +
'''Step04:''' Double click "Codeloader-Erase.bat" and press button 'SW1" on&nbsp;WISE-ED22 to start erasing&nbsp;flash with BC95.
  
 
[[File:Wise1570 nbiot firmware update 06.png|center|500px|Wise1570_nbiot_firmware_update_06.png]]
 
[[File:Wise1570 nbiot firmware update 06.png|center|500px|Wise1570_nbiot_firmware_update_06.png]]
 +
 +
&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;When the information above show up, please&nbsp;reset WISE-1570.&nbsp;&nbsp;&nbsp;&nbsp;
 +
 +
 +
 +
[[File:Wise1570 nbiot firmware update 12.png|center|300px|Wise1570_nbiot_firmware_update_12.png]]
 +
 +
&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;The button 'SW1' on WISE-ED22
 +
 +
  
 
[[File:Wise1570 nbiot firmware update 10.png|center|500px|Wise1570_nbiot_firmware_update_10.png]]
 
[[File:Wise1570 nbiot firmware update 10.png|center|500px|Wise1570_nbiot_firmware_update_10.png]]
  
−
[[File:Wise1570 nbiot firmware update 11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]]<br>
+
&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Erase&nbsp;flash&nbsp;in progress.
 +
 
 +
 
 +
 
 +
[[File:Wise1570 nbiot firmware update 11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]]&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;All procees have been done and "OK" will show up.&nbsp;
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
  
−
'''Step05:''' Find batch file “Codeloader-Erase.bat”, check the number of com port detected from PC in it and run it to erase for BC95.
+
'''Step05:''' Find the batch file “CodeLoadBC95HA.bat”, modify some parameters as red box below in it and to save it.
  
 
[[File:Wise1570 nbiot firmware update 07.png|center|300px|Wise1570_nbiot_firmware_update_07.png]]
 
[[File:Wise1570 nbiot firmware update 07.png|center|300px|Wise1570_nbiot_firmware_update_07.png]]
  
−
[[File:Wise1570 nbiot firmware update 08.png|center|500px|Wise1570_nbiot_firmware_update_08.png]]<br>
 
  
−
'''Step06:''' Find batch file “CodeLoaderBC95HA.bat”, modify the number of com port detected from PC in it and run it to program for BC95.
+
 
 +
Set the COM&nbsp;port, bnad and path for Code Loader installation.<br/>“COMPORT”&nbsp;: the number of com port deteced from PC.<br/>“BAND”: 800 (for Band 20), 850 (for Band 5) or 900 (for Band 8),<br/>“CODELOADER”&nbsp;: the path where the Code Loader is installed.
 +
 
 +
[[File:Wise1570 nbiot firmware update 08.png|center|600px|Wise1570_nbiot_firmware_update_08.png]]
 +
 
 +
 
 +
 
 +
 
 +
 
 +
'''Step06:''' Double click "CodeLoadBC95HA.bat" and press button 'SW1" on WISE-ED22 to start upgrading&nbsp;firmware with BC95.
  
 
[[File:Wise1570 nbiot firmware update 09.png|center|500px|Wise1570_nbiot_firmware_update_09.png]]
 
[[File:Wise1570 nbiot firmware update 09.png|center|500px|Wise1570_nbiot_firmware_update_09.png]]
 +
 +
&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; When the information above show up, please&nbsp;reset WISE-1570.&nbsp;&nbsp;&nbsp;&nbsp;
 +
 +
&nbsp;
 +
 +
[[File:Wise1570 nbiot firmware update 12.png|center|300px|Wise1570_nbiot_firmware_update_12.png]]
 +
 +
&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;The button 'SW1' on WISE-ED22
 +
 +
  
 
[[File:Wise1570 nbiot firmware update 10.png|center|500px|Wise1570_nbiot_firmware_update_10.png]]
 
[[File:Wise1570 nbiot firmware update 10.png|center|500px|Wise1570_nbiot_firmware_update_10.png]]
  
−
[[File:Wise1570 nbiot firmware update 11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]]<br>
+
&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Firmware update in progress.
 +
 
 +
 
 +
 
 +
 
  
−
{| style="border-spacing:0;width:15.748cm;"
+
[[File:Wise1570 nbiot firmware update 11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]] &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; All procees have been done and "OK" will show up.&nbsp;
−
|-
 
−
|  
 
−
|}
 

Latest revision as of 10:22, 7 September 2017

Please follow steps to firmware update

Step01: Prepare boards include WISE-1570 and WISE-ED22,
① Connect WISE-1570 to WISE-ED22 by FPC 10 pin cable.
② Connect WISE-ED22 to PC by micro-USB cable.
③ If you want to get pin-definition detailed for H/W rework as below, please get in touch with the contact person from ADVANTECH.

Wise1570_nbiot_firmware_update_01.png

Wise1570_nbiot_firmware_update_02.png



Step02: Check the number of COM port detected from PC.
The device will be visible in the Device Manager as below after driver installed.
Note: If you don't setup WISE-ED22 before, please refer to WISE-ED22 for it firstly.

Wise1570_nbiot_firmware_update_03.png



Step03: Find the batch file “Codeloader-Erase.bat”, modify some parameters as red box below in it and to save it.
Note: If you don't have programming tool "Code Loader", please get in touch with the contact person from ADVANTECH.

Wise1570_nbiot_firmware_update_04.png
Set the COM port and path for Code Loader installation.
“COMPORT” : the number of com port deteced from PC.
“CODELOADER” : the path where the Code Loader is installed.

Wise1570_nbiot_firmware_update_05.png




Step04: Double click "Codeloader-Erase.bat" and press button 'SW1" on WISE-ED22 to start erasing flash with BC95.

Wise1570_nbiot_firmware_update_06.png

                                                                                           When the information above show up, please reset WISE-1570.    


Wise1570_nbiot_firmware_update_12.png

                                                                                                                     The button 'SW1' on WISE-ED22


Wise1570_nbiot_firmware_update_10.png

                                                                                                                            Erase flash in progress.


Wise1570_nbiot_firmware_update_11.png
                                                                                                   All procees have been done and "OK" will show up. 




Step05: Find the batch file “CodeLoadBC95HA.bat”, modify some parameters as red box below in it and to save it.

Wise1570_nbiot_firmware_update_07.png


Set the COM port, bnad and path for Code Loader installation.
“COMPORT” : the number of com port deteced from PC.
“BAND”: 800 (for Band 20), 850 (for Band 5) or 900 (for Band 8),
“CODELOADER” : the path where the Code Loader is installed.

Wise1570_nbiot_firmware_update_08.png



Step06: Double click "CodeLoadBC95HA.bat" and press button 'SW1" on WISE-ED22 to start upgrading firmware with BC95.

Wise1570_nbiot_firmware_update_09.png

                                                                                          When the information above show up, please reset WISE-1570.    

 

Wise1570_nbiot_firmware_update_12.png

                                                                                                                       The button 'SW1' on WISE-ED22


Wise1570_nbiot_firmware_update_10.png

                                                                                                                 Firmware update in progress.



Wise1570_nbiot_firmware_update_11.png
                                                                                                  All procees have been done and "OK" will show up. 
Retrieved from "https://ess-wiki.advantech.com.tw/wiki/index.php?title=MCU/WISE-1570-FirmwareUpdate-For-BC95&oldid=8392"