Difference between revisions of "EPC-R5710 user guide"
From ESS-WIKI
Xingxing.li (talk | contribs) |
Xingxing.li (talk | contribs) (→Linux烧录方式（Linux Falsh eMMC Method）) |
||
| Line 131: | Line 131: | ||
*RTM: Beta version by SI/Power/QE verification and pre-loaded | *RTM: Beta version by SI/Power/QE verification and pre-loaded | ||
| + | |||
=== '''Linux烧录方式（Linux Falsh eMMC Method）''' === | === '''Linux烧录方式（Linux Falsh eMMC Method）''' === | ||
| + | |||
| + | '''Device routes and test''' | ||
| + | |||
| + | eMMC: /dev/mmcblk2<br/> SD: /dev/mmcblk1<br/> QSPI1: /dev/mtd0<br/> For example: SD test | ||
'''Install the system from SD card''' | '''Install the system from SD card''' | ||
| Line 150: | Line 155: | ||
<div>Function: used to upgrade or use the operating system in the SD card;</div> <div>Operation method: press the recovery button, plug in the power supply, power on the machine, press it for 2 seconds, and start it from the SD card;</div> <div>After starting from the SD card, whether the customer needs to upgrade or use the SD card system is customized by the customer (by modifying the files in the SD card)</div> | <div>Function: used to upgrade or use the operating system in the SD card;</div> <div>Operation method: press the recovery button, plug in the power supply, power on the machine, press it for 2 seconds, and start it from the SD card;</div> <div>After starting from the SD card, whether the customer needs to upgrade or use the SD card system is customized by the customer (by modifying the files in the SD card)</div> | ||
[[File:EPC-R5710 Button recovery.png|RTENOTITLE]] | [[File:EPC-R5710 Button recovery.png|RTENOTITLE]] | ||
| − | |||
| − | |||
| − | |||
== '''Liunx基本使用方法''' == | == '''Liunx基本使用方法''' == | ||
Revision as of 03:31, 13 November 2023
Contents
产品介绍（Product Presentation）
产品特性（product feature）
- NXP i.MX 8M PLUS 4xA53@1.8GHz
- Integrate 2.3 TOPS NPU and extend 8-26 TOPS AI card
- 4kP30,1080p60 HEVC, H.264, VP9, VP8 decoding
- 1080p60 H.265, H.264 encoding
- 1xHDMI2.0
- 5xGbE LAN, 1xGbE Fiber
- USB3.0,USB2.0,RS232,RS485,CAN FD,SATA,SD
- 8 Channels Mic Array
- Support AI card/5G/4G/GPS/ Wi-Fi 5/Wi-Fi6/BT
- Support TPM,TCM
- Linux and, Andriod
- Embeded DeviceOn, DeviceOn.CommBridge
产品官网链接（Product official website link）
EPC-R5710 - NXP i.MX 8M Plus AI edge intelligent System - Advantech
接口布局和尺寸(Layout and Sizes)
External I/O
接口布局圖 Board Dimension Layout
I/O
硬件接口说明（Hardware interface description）
Connector List
快速入门（Quick Start）
系统下载（OS Dowload）
- Linux系统（Linux OS）
Yocto 3.0：
| Part Number | Configuartion | ImageName | Image Download | BSP Name | BSP Download | SDK Version | SDK Download |
| EPC-R5710NQ-BLA1E | 4GB,-0 ~ 50°C | ||||||
| EPC-R5710NQ-ALA1E | 6GB,-0 ~ 50°C | ||||||
| EPC-R5710IQ-XLA1E | 2GB,-40 ~ 70°C | ||||||
| EPC-R5710IQ-BLA1E | 4GB,-40 ~ 70°C | ||||||
| EPC-R5710IQ-ALA1E | 6GB,-40 ~ 70°C |
Note： LIV= Yocto Linux, UIV=Ubuntu, DIV = Debian, AIV=Android
LBV=BSP, LIV= Image
LIV9=Yocto2.5, LIVA=Yocto3.0, LIVB=Yocto 3.3……
- Alpha: Basic I/O function bring up by RD;
- Beta: Basic I/O function、performance and middleware verified by RD. Peripherals integrated;
- GA: Beta version by QE verification;
- RTM: Beta version by SI/Power/QE verification and pre-loaded
Linux烧录方式（Linux Falsh eMMC Method）
Device routes and test
eMMC: /dev/mmcblk2
SD: /dev/mmcblk1
QSPI1: /dev/mtd0
For example: SD test
Install the system from SD card
1. Copy imx-image-full-imx8mpepcr5710a1-xxxxxx.rootfs.sdcard package to your desk- top.
2. Insert SD card to PC.
3. Make a bootable SD card. For example, the node of an SD card is /dev/sdv
# umount /dev/sdv* # dd if=./imx-image-full-imx8mpepcr5710a1-xxxx.rootfs.sdcard of=/dev/sdv bs=1M ;sync
4.Insert SD card and copy imx-image-full-imx8mpepcr5710a1-xxxxxx.rootfs.sdcard to USB disk.
5. Insert USB disk and SD card then boot the whole system from SD card by changing SW1 to 1-2 ON, 3-4 OFF.
6. Enter usb disk folder, make a bootable emmc
# cd /run/media/sda1/ # umount /dev/mmcblk2* # dd if=./imx-image-full-imx8mpepcr5710a1-xxxx.rootfs.sdcard of=/dev/mmcblk2 bs=1M ;sync
Button for System Recovery With SD Card
Function: used to upgrade or use the operating system in the SD card;
Operation method: press the recovery button, plug in the power supply, power on the machine, press it for 2 seconds, and start it from the SD card;
After starting from the SD card, whether the customer needs to upgrade or use the SD card system is customized by the customer (by modifying the files in the SD card)
