Difference between revisions of "MIO-5355 Yocto user guide"
| Line 4: | Line 4: | ||
=== '''產品特性(Product Features)''' === | === '''產品特性(Product Features)''' === | ||
| − | *Qualcomm® QCS6490/QCS5430 on 3.5" SBC, support extend operating temperature -20~70°C | + | *Qualcomm® QCS6490/QCS5430 on 3.5" SBC, support extend operating temperature -20~70°C |
| − | *Powerful but Low Power with 8x Kryo 670 CPU from 1.9 up to 2.7 GHz + Adreno GPU 643 + up to 12.3 TOPs iNPU | + | *Powerful but Low Power with 8x Kryo 670 CPU from 1.9 up to 2.7 GHz + Adreno GPU 643 + up to 12.3 TOPs iNPU |
| − | *Rugged Design with On-board 8GB LPDDR5 and 128GB UFS or eMMC | + | *Rugged Design with On-board 8GB LPDDR5 and 128GB UFS or eMMC |
| − | *Flexible Displays with HDMI and LVDS or eDP & Rich I/Os: 2x GbE, 6x USB, 4x COM, 2x MIPI-CSI, 1x Audio | + | *Flexible Displays with HDMI and LVDS or eDP & Rich I/Os: 2x GbE, 6x USB, 4x COM, 2x MIPI-CSI, 1x Audio |
| − | *3x M.2 Expansions: M.2 E-Key 2230 for WiFi/BT, M.2 B-Key 3052 for 4G/LTE, M.2 B-Key 2280 for NVMe Storage | + | *3x M.2 Expansions: M.2 E-Key 2230 for WiFi/BT, M.2 B-Key 3052 for 4G/LTE, M.2 B-Key 2280 for NVMe Storage |
| − | *Various OS Support: Yocto, Windows on Arm and Ubuntu | + | *Various OS Support: Yocto, Windows on Arm and Ubuntu |
| | ||
| Line 23: | Line 23: | ||
=== '''接口布局和尺寸(Layout and Sizes)''' === | === '''接口布局和尺寸(Layout and Sizes)''' === | ||
| − | '''[[File: | + | '''[[File:Mio-5355 top.jpg|TOPSIDE]]''' |
| − | '''[[File: | + | '''[[File:Mio-5355 bottom.jpg|BOTTOMSIDE]]''' |
=== '''Swtich / Jumper Settings''' === | === '''Swtich / Jumper Settings''' === | ||
| + | |||
| | ||
'''SW1''' | '''SW1''' | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| + | *SW1 ( 1-on ) : USB EDL Mode (Forced Recovery) | ||
| + | *SW1 ( 1-off ) : Normal Boot | ||
| + | *SW1 ( 2-on ) : AT Mode | ||
| + | *SW1 ( 2-off ) : ATX Mode | ||
| + | *SW1 ( 3-on ) : UFS | ||
| + | *SW1 ( 3-off ) : EMMC | ||
| + | *SW1 ( 4-on ) : LVDS (DVT Support) | ||
| + | *SW1 ( 4-off ) : eDP (DVT Support) | ||
'''SW2''' | '''SW2''' | ||
| − | |||
| − | + | '''[[File:Mio-5355 LVDS Resolution.jpg|LVDS_Resolution]]''' | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | | ''' | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | = '''快速入門 (Quick Start)''' = | + | === '''快速入門 (Quick Start)''' === |
=== '''系统下载 (OS Download)''' === | === '''系统下载 (OS Download)''' === | ||
| Line 65: | Line 52: | ||
'''Yocto 4.0 : ''' | '''Yocto 4.0 : ''' | ||
| − | + | [https://www.dropbox.com/scl/fo/tptbp080ohgckjdbr3vrq/AFLPSjOpHbpN6_IfFaoksO0/officialbuild/risc_qcs_linux_yocto_00041.0/2025-10-14?rlkey=647rksjn60zyqj4i134tflsuj&e=2&subfolder_nav_tracking=1&st=kixrspiq&dl=0 2025-10-14] | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
== '''Recovery & Rescue 燒錄方法 (Recovery & Rescue method)''' == | == '''Recovery & Rescue 燒錄方法 (Recovery & Rescue method)''' == | ||
Revision as of 07:10, 27 November 2025
Contents
產品介紹(Product introduction )
產品特性(Product Features)
- Qualcomm® QCS6490/QCS5430 on 3.5" SBC, support extend operating temperature -20~70°C
- Powerful but Low Power with 8x Kryo 670 CPU from 1.9 up to 2.7 GHz + Adreno GPU 643 + up to 12.3 TOPs iNPU
- Rugged Design with On-board 8GB LPDDR5 and 128GB UFS or eMMC
- Flexible Displays with HDMI and LVDS or eDP & Rich I/Os: 2x GbE, 6x USB, 4x COM, 2x MIPI-CSI, 1x Audio
- 3x M.2 Expansions: M.2 E-Key 2230 for WiFi/BT, M.2 B-Key 3052 for 4G/LTE, M.2 B-Key 2280 for NVMe Storage
- Various OS Support: Yocto, Windows on Arm and Ubuntu
產品官網連結(Product official website link)
硬件接口說明(Hardware interface introduction)
接口布局和尺寸(Layout and Sizes)
Swtich / Jumper Settings
SW1
- SW1 ( 1-on ) : USB EDL Mode (Forced Recovery)
- SW1 ( 1-off ) : Normal Boot
- SW1 ( 2-on ) : AT Mode
- SW1 ( 2-off ) : ATX Mode
- SW1 ( 3-on ) : UFS
- SW1 ( 3-off ) : EMMC
- SW1 ( 4-on ) : LVDS (DVT Support)
- SW1 ( 4-off ) : eDP (DVT Support)
SW2
快速入門 (Quick Start)
系统下载 (OS Download)
Yocto 4.0 :
Recovery & Rescue 燒錄方法 (Recovery & Rescue method)
1. Download the Qualcomm Software Center
2. Open the Qualcomm Software Center
3. Search "PCAT" in the search bar
4. Click Qualcomm® Product Configuration Assistant Tool
5. Select Qualcomm® Product Configuration Assistant Tool version
Version: 2.33.2.119
6. Install Qualcomm® Product Configuration Assistant Tool 2.33.2.119
7. Search "QUTS" in the search bar
8. Click the Qualcomm® Unified Tools Services
9. Select Qualcomm® Unified Tools Services version
Version : 1.75.2.9
10. Install Qualcomm® Unified Tools Services 1.75.2.9
11. You will find the new application in your Windows system .
12. Unzip the UFS File and eMMC File
For example :
2860A1AIM38LIV11026_2024-11-17_ufs.tgz
2860A1AIM38LIV11026_2024-11-17_emmc.tgz
13 Connect your device via Micro USB.
14. if your pc can not identify the USB , please download the "'Qualcomm USB Driver"
15. Search " Qualcomm USB Driver " in the search bar , then install the driver.
Reformat
For confirmation, we will erase the partition before UFS installation.
1. Select provision button 
2. Add the prog_firehose_ddr.elf and provision_ufs31.xml in UFS folder.
3. Then press "OK" , it will start to do USF Provision.
4. When the Provision finished , you can see the result in message window.
Flash UFS
1. Change the SW1 and SW2
Flash UFS: the SW1 switch to 1-on, 2-on Forced Recovery : The SW2 switch to 1-on ,2 - on .
2. Turn on the power
3. Open " PCATApp" Tool
4. Click " Connect A Device"
5. Select "Qualcomm HS-USB QDLoader 9008 (COM11)
6. Click " Connect " device
7. When you connected successfully , it will show "qreen word" - Qualcomm HS-USB QDLoader 9008 (COM 11)
8. Select UFS Folder in PCAT Tool , the Tool will help load Files automatically and Select "MEMORY_TYPE_UFS"
9. Click " Download"
10. UFS Download Status
'11. UFS Donwload 'completed
12. When you finish the download process , please change the switch.
Flash UFS: the SW1 switch to 1-off, 2-off Forced Recovery : The SW2 switch to 1-on ,2 - on.
Flash eMMC
1. Turn off the Power
2. Change the SW1 and SW2
Flash eMMC: the SW1 switch to 1-off, 2-on Forced Recovery : The SW2 switch to 1-on ,2 - on .
3. Turn on the power
4. Make sure the device connection status.
5. If the device disconnect with PCAT Tool , please connect it again.
6. Select eMMC Folder.
7. Make sure the setting ,then press " Download " button.
8. eMMC download status
'9. eMMC Donwload 'completed
10. When the eMMC installation finished . Close the PCAT tool ,
'11 'Please remove the mirco usb cable, turn off the power
12. eMMC boot up : SW1 switch to 1-off, 2-on Forced Recovery : The SW2 switch to 1-off ,2 - off .
13. Connect debug cable and open the terminal , turn on the power .
14. If you have done " Reformat " , the message will show " DDR: Start of DDR Training Init "
15. When the systm boot up , you need to type " qcs6490-rom2860a1 login: root " , " Password: oelinux123"
16. After type the login and password , and you also can chek the image information about date , kernel version etc..
Linux BSP編譯方法(Linux BSP Compile Method)
Modify scripts/env.sh file:
#!/bin/bash
#TOPDIR=$(dirname $(dirname $(readlink -fm $0)))
TOPDIR=$(dirname $(dirname $(readlink -fm ${BASH_SOURCE[0]})))
