Difference between revisions of "MCU/WISE-1570-FirmwareUpdate-For-BC95"
Line 21: | Line 21: | ||
− | '''Step04:''' Double click "Codeloader-Erase.bat" and press 'SW1" | + | |
+ | |||
+ | '''Step04:''' Double click "Codeloader-Erase.bat" and press button 'SW1" on WISE-ED22 to start erasing flash with BC95. | ||
[[File:Wise1570 nbiot firmware update 06.png|center|500px|Wise1570_nbiot_firmware_update_06.png]] | [[File:Wise1570 nbiot firmware update 06.png|center|500px|Wise1570_nbiot_firmware_update_06.png]] | ||
+ | |||
+ | When the information above show up, please reset WISE-1570. | ||
+ | |||
+ | |||
+ | |||
+ | [[File:Wise1570 nbiot firmware update 12.png|center|300px|Wise1570_nbiot_firmware_update_12.png]] | ||
+ | |||
+ | The button 'SW1' on WISE-ED22 | ||
+ | |||
+ | |||
[[File:Wise1570 nbiot firmware update 10.png|center|500px|Wise1570_nbiot_firmware_update_10.png]] | [[File:Wise1570 nbiot firmware update 10.png|center|500px|Wise1570_nbiot_firmware_update_10.png]] | ||
− | [[File:Wise1570 nbiot firmware update 11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]] | + | Erase flash in progress. |
+ | |||
+ | |||
+ | |||
+ | [[File:Wise1570 nbiot firmware update 11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]] All procees have been done and "OK" will show up. | ||
+ | |||
+ | |||
Line 43: | Line 61: | ||
− | '''Step06:''' Double click "CodeLoadBC95HA.bat" and press 'SW1" | + | '''Step06:''' Double click "CodeLoadBC95HA.bat" and press button 'SW1" on WISE-ED22 to start upgrading firmware with BC95. |
[[File:Wise1570 nbiot firmware update 09.png|center|500px|Wise1570_nbiot_firmware_update_09.png]] | [[File:Wise1570 nbiot firmware update 09.png|center|500px|Wise1570_nbiot_firmware_update_09.png]] | ||
+ | |||
+ | When the information above show up, please reset WISE-1570. | ||
+ | |||
+ | | ||
+ | |||
+ | [[File:Wise1570 nbiot firmware update 12.png|center|300px|Wise1570_nbiot_firmware_update_12.png]] | ||
+ | |||
+ | The button 'SW1' on WISE-ED22 | ||
+ | |||
+ | |||
[[File:Wise1570 nbiot firmware update 10.png|center|500px|Wise1570_nbiot_firmware_update_10.png]] | [[File:Wise1570 nbiot firmware update 10.png|center|500px|Wise1570_nbiot_firmware_update_10.png]] | ||
+ | |||
+ | Firmware update in progress. | ||
+ | |||
+ | |||
+ | |||
+ | |||
[[File:Wise1570 nbiot firmware update 11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]] | [[File:Wise1570 nbiot firmware update 11.png|center|500px|Wise1570_nbiot_firmware_update_11.png]] | ||
− | + | All procees have been done and "OK" will show up. | |
− | |||
− | |||
− | |||
− |
Revision as of 08:56, 7 September 2017
Please follow steps to firmware update
Step01: Prepare boards include WISE-1570, WISE-ED22 and micro-USB cable.
Note: If you want to get pin-definition detailed for H/W rework as below, please get in touch with the contact person from ADVANTECH.
Step02: Check the number of COM port detected from PC.
The device will be visible in the Device Manager as below after driver installed.
Note: If you don't setup WISE-ED22 before, please refer to WISE-ED22 for it firstly.
Step03: Find the batch file “Codeloader-Erase.bat”, modify some parameters as red box below in it and to save it.
Note: If you don't have programming tool "Code Loader", please get in touch with the contact person from ADVANTECH.
“COMPORT” : the number of com port deteced from PC.
“CODELOADER” : the path where the Code Loader is installed.
Step04: Double click "Codeloader-Erase.bat" and press button 'SW1" on WISE-ED22 to start erasing flash with BC95.
When the information above show up, please reset WISE-1570.
The button 'SW1' on WISE-ED22
Erase flash in progress.
Step05: Find the batch file “CodeLoadBC95HA.bat”, modify some parameters as red box below in it and to save it.
Set the com port, bnad and path for Code Loader installation.
“COMPORT” : the number of com port deteced from PC.
“BAND”: 800 (for Band 20), 850 (for Band 5) or 900 (for Band 8),
“CODELOADER” : the path where the Code Loader is installed.
Step06: Double click "CodeLoadBC95HA.bat" and press button 'SW1" on WISE-ED22 to start upgrading firmware with BC95.
When the information above show up, please reset WISE-1570.
The button 'SW1' on WISE-ED22
Firmware update in progress.
All procees have been done and "OK" will show up.