Difference between revisions of "Linux BSP User Guide for jetson series"
(→Getting Linux Source Code) |
|||
Line 28: | Line 28: | ||
<pre>$sudo apt-get install qemu-user-static | <pre>$sudo apt-get install qemu-user-static | ||
</pre> | </pre> | ||
+ | |||
Line 65: | Line 66: | ||
</pre> | </pre> | ||
− | '''AIR-030''' | + | '''AIR-030'''<br/> Jetpack 5.0.1 / L4T 34.1.1 |
− | Jetpack 5.0.1 / L4T 34.1.1 | ||
<pre>$ repo init -u https://AIM-Linux@dev.azure.com/AIM-Linux/risc_nvidia_jetson/_git/manifest -m air030_3411.xml | <pre>$ repo init -u https://AIM-Linux@dev.azure.com/AIM-Linux/risc_nvidia_jetson/_git/manifest -m air030_3411.xml | ||
</pre> | </pre> |
Revision as of 03:04, 22 August 2022
Contents
Linux BSP Version
Ubuntu 18.04
Kernel 4.9.201
Released Image
Build Environment on Host
Currently, we adopt Docker as build environment.
You can get the latest version of advrisc/u18.04-imx8lbv1 Docker image for developing nVidia jetson projects.
Docker command:
$ docker pull advrisc/u18.04-imx8lbv1
Run Docker example
Step1 Run docker container (example)
sudo docker run -it --name jetson_linux_risc -v /home/bsp/myLinux:/home/adv/BSP:rw --privileged advrisc/u18.04-imx8lbv1:latest /bin/bash
Step2 In container, change the user. (example)
adv@7cc0fa834366:~$ sudo chown adv:adv -R BSP
Dependncy Library
Please install library in the HOST outside of docker if you get Exec format error.
$sudo apt-get install qemu-user-static
Getting Linux Source Code
$ export GIT_SSL_NO_VERIFY=1
EPC-R7000
$ repo init -u https://AIM-Linux@dev.azure.com/AIM-Linux/EPC-R7200/_git/manifests -m epcr7000.xml
EPC-R7200
Jetpack 4.5.1 / L4T 32.5.1
$ cd ~/BSP $ mkdir jetson_linux_risc $ cd jetson_linux_risc $ git config --global user.name "Your Name" $ git config --global user.email you@example.com $ repo init -u https://AIM-Linux@dev.azure.com/AIM-Linux/EPC-R7200/_git/manifests $ repo sync
Jetpack 4.6.1 / L4T 32.7.1
$ repo init -u https://AIM-Linux@dev.azure.com/AIM-Linux/EPC-R7200/_git/manifests -m 3271.xml
AIR-020
Jetpack 4.5.1 / L4T 32.5.1
$ cd ~/BSP $ mkdir jetson_linux_risc $ cd jetson_linux_risc $ git config --global user.name "Your Name" $ git config --global user.email you@example.com $ repo init -u https://AIM-Linux@dev.azure.com/AIM-Linux/AIR-020/_git/manifests $ repo sync
Jetpack 4.6.1 / L4T 32.7.1
$ repo init -u https://AIM-Linux@dev.azure.com/AIM-Linux/AIR-020/_git/manifests -m 3271.xml
AIR-030
Jetpack 5.0.1 / L4T 34.1.1
$ repo init -u https://AIM-Linux@dev.azure.com/AIM-Linux/risc_nvidia_jetson/_git/manifest -m air030_3411.xml
Build Image - AIR-020 / EPC-R7200
Build Release Image
sudo ./scripts/build_release.sh -s <SOC> -v <VERSION> Where "-v : Image version" 00001~99999 "-s : 186 - Jetson TX2 NX" " : 194 - Jetson Xavier NX" " : 210 - Jetson Nano"
Build Kernel - AIR-020 / EPC-R7200
sudo ./scripts/build_kernel.sh -s <SOC> -v <VERSION>
Enter Download Mode
Press following button + power ON, or
EPC-R7200 | AIR020 |
![]() |
![]() |
Enter following command in the device,
$ sudo reboot --force forced-recovery
Flash Image
Before flashing the image, power off the DUT, press recovery button and power on.
EPC-R7200 | AIR-020 | |
---|---|---|
Xavier NX |
$ cd $TOP/Linux_for_Tegra/186/ |
$ cd $TOP/Linux_for_Tegra/194/ $ sudo ./flash.sh jetson-xavier-nx-devkit-emmc mmcblk0p1 |
TX2 NX | $ cd $TOP/Linux_for_Tegra/186/ $ sudo ./flash.sh jetson-xavier-nx-devkit-tx2-nx mmcblk0p1 |
$ cd $TOP/Linux_for_Tegra/186/ $ sudo ./flash.sh jetson-xavier-nx-devkit-tx2-nx mmcblk0p1 |
Nano |
$ cd $TOP/Linux_for_Tegra/210/ |
$ cd $TOP/Linux_for_Tegra/210/ $ sudo ./flash.sh jetson-nano-devkit-emmc mmcblk0p1 |
Flash DTB
EPC-R7200 | AIR-020 | |
---|---|---|
Xavier NX | $ cd $TOP/Linux_for_Tegra/186/ $ sudo ./flash.sh -r -k kernel-dtb xavier-nx-epcr7200 mmcblk0p1 |
$ cd $TOP/Linux_for_Tegra/186/ $ sudo ./flash.sh -r -k kernel-dtb jetson-xavier-nx-devkit-emmc mmcblk0p1 |
TX2 NX | $ cd $TOP/Linux_for_Tegra/186/ $ sudo ./flash.sh -r -k kernel-dtb tx2-nx-epcr7200 mmcblk0p1 |
$ cd $TOP/Linux_for_Tegra/186/ $ sudo ./flash.sh -r -k kernel-dtb jetson-xavier-nx-devkit-tx2-nx mmcblk0p1 |
Nano | $ cd $TOP/Linux_for_Tegra/210/ $ sudo ./flash.sh -r -k DTB nano-epcr7200 mmcblk0p1 |
$ cd $TOP/Linux_for_Tegra/210/ $ sudo ./flash.sh -r -k kernel-dtb jetson-nano-devkit-emmc mmcblk0p1 |
Flash Mac Address
GBE in eeprom
$ sudo ./eeprom $SOC $mac_address
Where SOC
186 : TX2-NX 194 : XavierNX 210 : Nano
Intel I210
$ sudo -s $ BDF=`lspci | grep 210 | awk '{print $1}'` $ setpci -s $BDF COMMAND=0007
Get NIC
$./EepromAccessTool
Flash I210 address with mac_address = D4E5F6123456 ( If mac address = D4:E5:F6:12:34:56 )
$ ./EepromAccessTool -nic=<NIC> -f=Dev_Start_I210_Copper_NOMNG_8Mb_A2_3.25_0.03.hex -mac=$mac_address
Cold reboot the device.
Reference
Miscellaneous
EPC-R7200-UIO
AIR-020-RS-485
Boot Device
In CBoot, there is bootable menu,
[0002.262] I> Using default boot order [0002.265] I> boot-dev-order :- [0002.268] I> 1.sd [0002.270] I> 2.usb [0002.272] I> 3.nvme [0002.274] I> 4.emmc [0002.276] I> 5.net [0002.277] I> Hit any key to stop autoboot: 4 3 2 1
Change the boot order, you may type
$ setvar boot-order emmc, sd, usb, net
or
$ setvar boot-order emmc
And boot the system
$ boot
For example, there are two of bootable devices - NVME SSD and EMMC If the NVME SSD was plugged-in, the system will always boot NVME SSD.
Boot to Rootfs in external storage
Make Rootfs
1.Check the external drive’s device name (e.g. NVME : /dev/nvmeXn1, U-Disk : /dev/sdX): The <search_keyword> will be NVME : nvme and U-Disk : sd
$ lsblk -d -p | grep <search_keyword> | cut -d\ -f 1
Note that there must be two spaces after the ‑d\.
2.Create a new GPT:
$ sudo parted /dev/<device> mklabel gpt
Where <device> is the device name that your host computer assigns to the external drive. For example, if the host computer assigns the NVMe drive device name nvme0n1, the command is:
$ sudo parted /dev/nvme0n1 mklabel gpt
3.Add the APP partition:
$ sudo parted /dev/<device> mkpart APP 0GB <size>
Where <size> is the size of the partition. It must be at least 16 GB. It may be larger if the external drive has enough space. For example, if <device> is nvme0n1 and the partition is to contain 16 GB, enter:
$ sudo parted /dev/nvme0n1 mkpart APP 0GB 16GB
The NVME device name of the APP partition <DPART> is then <nvmeXn1>p1.
The U-Disk device name of the APP partition <DPART> is then <sdX>1.
4.Format APP as an ext4 partition and mount it.
$ sudo mkfs.ext4 /dev/<DPART> $ sudo mount /dev/<DPART> /mnt
You may format APP as ext2 or ext3, but ext4 is strongly recommended because it is faster, more compact, and more reliable.
5.Connect the Jetson device to a host computer and put it into recovery mode, then enter the following commands to generate the rootfs without flashing the device:
$ cd Linux_for_Tegra/ $ sudo BOOTDEV=<DPART> ./flash.sh --no-flash <board> <DPART> $ sudo mkdir tmp_system $ sudo mount bootloader/system.img.raw ./tmp_system $ sudo rsync -axHAWX --numeric-ids --info=progress2 --exclude=/proc ./tmp_system/ /mnt
Where <DPART> is the device name that the Jetson device will assign to APP.
6.Unmount the external drive and disconnect it from the host computer:
$ sudo umount /mnt $ sudo umount ./tmp_system
7.Plug the external drive into the target device and power on.
reference : nVidia
Set up boot menu for multi-rootfs
During system boot to u-boot, it will check the file /boot/extlinux/extlinux.conf to select one of rootfs.
The following example added NVME and SD card for candidate. the default rootfs will be primary. You may choose one of option in console termianl or default if there was no any selection.
Modify the root path to the <DPART> for every external storage
TIMEOUT 30 DEFAULT primary MENU TITLE L4T boot options LABEL primary MENU LABEL primary kernel LINUX /boot/Image INITRD /boot/initrd FDT /boot/tegra194-epcr7200.dtb APPEND ${cbootargs} quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 LABEL sdcard MENU LABEL Boot from SD Card LINUX /boot/Image INITRD /boot/initrd FDT /boot/tegra194-epcr7200.dtb APPEND ${cbootargs} quiet root=/dev/sda1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 LABEL UIO-4040 MENU LABEL Boot from UIO-4040 LINUX /boot/Image INITRD /boot/initrd FDT /boot/tegra194-epcr7200.dtb APPEND ${cbootargs} quiet root=/dev/sda1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0
Calculate GPIO value from pin number
Device PID VID
Open a terminal window on your host and enter the command lsusb.
The Jetson module is in Force Recovery mode if you see this message:
Bus <bbb> Device <ddd>: ID 0955: <nnnn> Nvidia Corp.
Where:
•<bbb> is any three-digit number
•<ddd> is any three-digit number
•<nnnn> is a four-digit number that represents the type of Jetson module:
Simultaneous flashing to multiple target devices.
Create MFI
$ sudo BOARDID=<boardid> BOARDSKU=<boardsku> FAB=<fab> BOARDREV=<boardrev> FUSELEVEL=fuselevel_production ./nvmassflashgen.sh <BOARD> <DEV_PART>
ex : Create a MFI tarball for a TX2 board.
$ cd Linux_for_Tegra $ sudo BOARDID=3636 BOARDSKU=0001 FAB=100 BOARDREV=B.0 FUSELEVEL=fuselevel_production ./nvmassflashgen.sh jetson-xavier-nx-devkit-tx2-nx mmcblk0p1
The tarball mfi_<BOARD>.tbz2 will be created in the Linux_for_Tegra/
Flash this tarball to device
1.Download mfi_jetson-xavier-nx-devkit-emmc.tbz2 to each flashing hosts.
2.Untar mfi_<BOARD>.tbz2.
$ tar xvjf mfi_mfi_<BOARD>.tbz2 $ cd mfi_jetson-xavier-nx-devkit-emmc
3. Connect Jetson boards(jetson-xavier-nx-devkit-emmc only) and put them in RCM mode.
$ ./nvmflash.sh