Difference between revisions of "MIO-5355 Yocto user guide"

From ESS-WIKI
Jump to: navigation, search
(Created page with " == {{DISPLAYTITLE:AOM-2721 Yocto user guide}}'''產品介紹(Product introduction )''' == === '''產品特性(Product Features)''' === *Qualcomm 8 Kryo cores up to 2.7GHz...")
(No difference)

Revision as of 06:26, 27 November 2025

產品介紹(Product introduction )

產品特性(Product Features)

  • Qualcomm 8 Kryo cores up to 2.7GHz
  • Onboard LPDDR5 8GB, 8533MT/s memory
  • Onboard 128GB UFS and 128GB eMMC
  • 1x 2ch. LVDS, 1x DP and 1x HDMI for displays
  • 2x USB3.2 Gen1, 2x USB2.0, 2x PCIe Gen3.0 x1, 2x 4wire UART, 1x SPI,16x GPIO, 1x I2C, 2x MIPI-CSI x4
  • 1x Micro SD and 1x Nano SIM
  • Support Windows 11 IoT Enterprise

 

產品官網連結(Product official website link)

<a href="https://www.advantech.com/zh-tw/products/a9f9c02c-f4d2-4bb8-9527-51fbd402deea/aom-2721/mod_f2ab9bc8-c96e-4ced-9648-7fce99a0e24a" alt="https://www.advantech.com/zh-tw/products/a9f9c02c-f4d2-4bb8-9527-51fbd402deea/aom-2721/mod_f2ab9bc8-c96e-4ced-9648-7fce99a0e24a" title="https://www.advantech.com/zh-tw/products/a9f9c02c-f4d2-4bb8-9527-51fbd402deea/aom-2721/mod_f2ab9bc8-c96e-4ced-9648-7fce99a0e24a">AOM-2721</a>

 

硬件接口說明(Hardware interface introduction)

接口布局和尺寸(Layout and Sizes)

<img src="/wiki/images/c/c3/EPC-R2860_cover_sizeS.png" _fck_mw_filename="EPC-R2860 cover sizeS.png" _fck_mw_origimgwidth="333" _fck_mw_origimgheight="294" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

<img src="/wiki/images/3/30/ROM-2860_layout_functions_top_s.PNG" _fck_mw_filename="ROM-2860 layout functions top s.PNG" _fck_mw_origimgwidth="465" _fck_mw_origimgheight="414" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

<img src="/wiki/images/a/ac/ROM-2860_layout_functions_buttom_s.PNG" _fck_mw_filename="ROM-2860 layout functions buttom s.PNG" _fck_mw_origimgwidth="450" _fck_mw_origimgheight="375" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

<img src="/wiki/images/b/bb/ROM-2860_layout_functions_switchsetting_ss.png" _fck_mw_filename="ROM-2860 layout functions switchsetting ss.png" _fck_mw_origimgwidth="493" _fck_mw_origimgheight="304" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

EPC-R2860 接口布局圖 Board Dimension Layout

 

SW6

主板内置插针式引脚排序方式 (Pin Header defination) 

Internal I/O, Jummper/Switch List:

Position Description
   

 

快速入門 (Quick Start)

系统下载 (OS Download)

Yocto 4.0 :  

SW1

  • SW1(1-off,2-on) : eMMC boot
  • SW1(1-on,2-on) : UFS boot

SW2

  • SW2(1-on): Forced Recovery
  • SW2(1-off): Normal Boot
  • SW2(2-on): AT mode
  • SW2(2-off):ATx mode

Recovery & Rescue 燒錄方法 (Recovery & Rescue method)

1. Download the Qualcomm Software Center 

      <a href="https://softwarecenter.qualcomm.com/#/" alt="https://softwarecenter.qualcomm.com/#/" title="https://softwarecenter.qualcomm.com/#/">Qualcomm® Software Center</a> 

2. Open the Qualcomm Software Center 

3. Search "PCAT" in the search bar 

<img src="/wiki/images/4/4c/ROM-2860_search_bar.PNG" _fck_mw_filename="ROM-2860 search bar.PNG" _fck_mw_origimgwidth="1519" _fck_mw_origimgheight="214" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

4. Click Qualcomm® Product Configuration Assistant Tool 

5. Select Qualcomm® Product Configuration Assistant Tool version 

    Version: 2.33.2.119

<img src="/wiki/images/f/f3/ROM-2860_PCAT_Tool_version.PNG" _fck_mw_filename="ROM-2860 PCAT Tool version.PNG" _fck_mw_origimgwidth="1752" _fck_mw_origimgheight="442" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

6. Install Qualcomm® Product Configuration Assistant Tool 2.33.2.119 

7. Search "QUTS" in the search bar  

<img src="/wiki/images/a/a7/ROM-2860_QUTS_Tool.PNG" _fck_mw_filename="ROM-2860 QUTS Tool.PNG" _fck_mw_origimgwidth="1468" _fck_mw_origimgheight="410" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

8. Click the  Qualcomm® Unified Tools Services 

9. Select Qualcomm® Unified Tools Services version 

     Version : 1.75.2.9

10. Install Qualcomm® Unified Tools Services  1.75.2.9 

<img src="/wiki/images/9/93/ROM-2860_QUTS_Tool_version.PNG" _fck_mw_filename="ROM-2860 QUTS Tool version.PNG" _fck_mw_origimgwidth="1803" _fck_mw_origimgheight="390" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

11. You will find the new application in your Windows system . 

<img src="/wiki/images/6/69/ROM-2860_new_tools_in_windows.PNG" _fck_mw_filename="ROM-2860 new tools in windows.PNG" _fck_mw_origimgwidth="272" _fck_mw_origimgheight="158" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

12. Unzip the UFS File and eMMC File 

<a href="https://ess-wiki.advantech.com.tw/view/AIM-Linux/BSP/Qualcomm/Linux_Yocto_OS_Release_note/LE_aeversion" alt="https://ess-wiki.advantech.com.tw/view/AIM-Linux/BSP/Qualcomm/Linux_Yocto_OS_Release_note/LE_aeversion" title="https://ess-wiki.advantech.com.tw/view/AIM-Linux/BSP/Qualcomm/Linux_Yocto_OS_Release_note/LE_aeversion">https://ess-wiki.advantech.com.tw/view/AIM-Linux/BSP/Qualcomm/Linux_Yocto_OS_Release_note/LE_aeversion</a> 

For example : 

         2860A1AIM38LIV11026_2024-11-17_ufs.tgz

         2860A1AIM38LIV11026_2024-11-17_emmc.tgz 

13 Connect your device via Micro USB.

14. if your pc can not identify the USB , please download the "'Qualcomm USB Driver" 

15. Search " Qualcomm USB Driver " in the search bar , then install the driver. 

<img src="/wiki/images/a/ac/ROM-2860_search_bar_usb_driver.PNG" _fck_mw_filename="ROM-2860 search bar usb driver.PNG" _fck_mw_origimgwidth="966" _fck_mw_origimgheight="475" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

Reformat  

For confirmation, we will erase the partition before UFS installation. 

1. Select  provision button   <img src="/wiki/images/8/89/ROM-2860_provision_file_button.PNG" _fck_mw_filename="ROM-2860 provision file button.PNG" _fck_mw_origimgwidth="49" _fck_mw_origimgheight="43" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />  

<img src="/wiki/images/d/da/ROM-2860_provision_file_icon_yocto.PNG" _fck_mw_filename="ROM-2860 provision file icon yocto.PNG" _fck_mw_origimgwidth="946" _fck_mw_origimgheight="113" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

2. Add the prog_firehose_ddr.elf and provision_ufs31.xml in UFS  folder. 

<img src="/wiki/images/2/26/ROM-2860_provision_clean.PNG" _fck_mw_filename="ROM-2860 provision clean.PNG" _fck_mw_origimgwidth="769" _fck_mw_origimgheight="167" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

3. Then press "OK" , it will start to do USF Provision. 

<img src="/wiki/images/9/91/ROM-2860_provision_file_running.PNG" _fck_mw_filename="ROM-2860 provision file running.PNG" _fck_mw_origimgwidth="454" _fck_mw_origimgheight="166" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

4. When the Provision finished , you can see the result in message window. 

<img src="/wiki/images/d/d3/ROM-2860_provision_log_yocto.PNG" _fck_mw_filename="ROM-2860 provision log yocto.PNG" _fck_mw_origimgwidth="991" _fck_mw_origimgheight="166" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

Flash UFS

 1. Change the SW1 and SW2 

 Flash UFS:  the SW1 switch to 1-on, 2-on      Forced Recovery :  The SW2 switch to 1-on  ,2 - on . 

 2. Turn on the power 

 3. Open " PCATApp" Tool 

 4. Click " Connect A Device" 

<img src="/wiki/images/b/b4/ROM-2860_PCAT_UFS_.PNG" _fck_mw_filename="ROM-2860 PCAT UFS .PNG" _fck_mw_origimgwidth="613" _fck_mw_origimgheight="330" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

5. Select  "Qualcomm HS-USB QDLoader 9008 (COM11) 

<img src="/wiki/images/3/31/ROM-2860_comport_connect_0_yocto.PNG" _fck_mw_filename="ROM-2860 comport connect 0 yocto.PNG" _fck_mw_origimgwidth="1206" _fck_mw_origimgheight="650" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

6. Click " Connect "  device 

<img src="/wiki/images/0/0a/ROM-2860_comport_connect_1_yocto.PNG" _fck_mw_filename="ROM-2860 comport connect 1 yocto.PNG" _fck_mw_origimgwidth="1204" _fck_mw_origimgheight="649" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

7. When you connected successfully , it will show  "qreen word" - Qualcomm HS-USB QDLoader 9008 (COM 11) 

<img src="/wiki/images/f/f9/ROM-2860_comport_connect_2_yocto.PNG" _fck_mw_filename="ROM-2860 comport connect 2 yocto.PNG" _fck_mw_origimgwidth="1207" _fck_mw_origimgheight="259" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

8. Select UFS Folder in PCAT Tool , the Tool will help load Files automatically and Select "MEMORY_TYPE_UFS" 

<img src="/wiki/images/f/f6/ROM-2860_UFS_0_yocto.PNG" _fck_mw_filename="ROM-2860 UFS 0 yocto.PNG" _fck_mw_origimgwidth="1209" _fck_mw_origimgheight="651" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

9. Click " Download" 

<img src="/wiki/images/8/88/ROM-2860_UFS_download_yocto.PNG" _fck_mw_filename="ROM-2860 UFS download yocto.PNG" _fck_mw_origimgwidth="1916" _fck_mw_origimgheight="728" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

10. UFS Download Status 

<img src="/wiki/images/d/df/ROM-2860_UFS_download_1_yocto.PNG" _fck_mw_filename="ROM-2860 UFS download 1 yocto.PNG" _fck_mw_origimgwidth="1919" _fck_mw_origimgheight="621" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

'11. UFS Donwload 'completed

<img src="/wiki/images/6/6d/ROM-2860_UFS_download_done_yocto.PNG" _fck_mw_filename="ROM-2860 UFS download done yocto.PNG" _fck_mw_origimgwidth="1924" _fck_mw_origimgheight="1002" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

12. When you finish the download process , please change the switch.

        Flash UFS:  the SW1 switch to 1-off, 2-off      Forced Recovery :  The SW2 switch to 1-on  ,2 - on.

 

Flash eMMC

1.  Turn off the Power 

2. Change the SW1 and SW2 

 Flash eMMC:  the SW1 switch to 1-off, 2-on      Forced Recovery :  The SW2 switch to 1-on  ,2 - on . 

3. Turn on the power 

4. Make sure the device connection status. 

5. If the device disconnect with PCAT Tool , please connect it again. 

<img src="/wiki/images/3/31/ROM-2860_comport_connect_0_yocto.PNG" _fck_mw_filename="ROM-2860 comport connect 0 yocto.PNG" _fck_mw_origimgwidth="1206" _fck_mw_origimgheight="650" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

 

6. Select eMMC Folder.

<img src="/wiki/images/1/1e/ROM-2860_emmc_0_yocto.PNG" _fck_mw_filename="ROM-2860 emmc 0 yocto.PNG" _fck_mw_origimgwidth="1205" _fck_mw_origimgheight="648" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

7. Make sure the setting ,then press " Download " button.

<img src="/wiki/images/e/e1/ROM-2860_emmc_1_download_yocto.PNG" _fck_mw_filename="ROM-2860 emmc 1 download yocto.PNG" _fck_mw_origimgwidth="1914" _fck_mw_origimgheight="682" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

 8. eMMC download status 

<img src="/wiki/images/0/07/ROM-2860_emmc_2_download_yocto.PNG" _fck_mw_filename="ROM-2860 emmc 2 download yocto.PNG" _fck_mw_origimgwidth="1916" _fck_mw_origimgheight="738" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

'9. eMMC Donwload 'completed

<img src="/wiki/images/1/13/ROM-2860_emmc_3_download_yocto.PNG" _fck_mw_filename="ROM-2860 emmc 3 download yocto.PNG" _fck_mw_origimgwidth="1924" _fck_mw_origimgheight="649" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

10. When the eMMC installation finished . Close the PCAT tool ,

'11 'Please remove the mirco usb cable, turn off the power 

12. eMMC boot up :  SW1 switch to 1-off, 2-on      Forced Recovery :  The SW2 switch to 1-off  ,2 - off . 

13. Connect debug cable and open the terminal ,  turn on the power . 

14.  If you have done " Reformat " , the message will show " DDR: Start of DDR Training Init "   

15.  When the systm boot up , you need to type  " qcs6490-rom2860a1 login: root "  , " Password: oelinux123"

16.  After type the login and password , and you also can chek the image information about date , kernel version etc.. 

<img src="/wiki/images/8/8c/ROM-2860_emmc_boot_yocto.PNG" _fck_mw_filename="ROM-2860 emmc boot yocto.PNG" _fck_mw_origimgwidth="1328" _fck_mw_origimgheight="583" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

 

Linux BSP編譯方法(Linux BSP Compile Method) 

<a href="https://ess-wiki.advantech.com.tw/view/AIM-Linux/BSP/Qualcomm/RISC_QCS_Yocto_LE1.3_AOM2721" alt="https://ess-wiki.advantech.com.tw/view/AIM-Linux/BSP/Qualcomm/RISC_QCS_Yocto_LE1.3_AOM2721" title="https://ess-wiki.advantech.com.tw/view/AIM-Linux/BSP/Qualcomm/RISC_QCS_Yocto_LE1.3_AOM2721">Yocto 4.0(LE 1.3)</a>

<a href="https://ess-wiki.advantech.com.tw/view/AIM-Linux/BSP/Qualcomm/RISC_QCS_Yocto_LE1.1_AOM2721" alt="https://ess-wiki.advantech.com.tw/view/AIM-Linux/BSP/Qualcomm/RISC_QCS_Yocto_LE1.1_AOM2721" title="https://ess-wiki.advantech.com.tw/view/AIM-Linux/BSP/Qualcomm/RISC_QCS_Yocto_LE1.1_AOM2721">Yocto 4.0(LE 1.1)</a>

 

Modify scripts/env.sh file:

#!/bin/bash

#TOPDIR=$(dirname $(dirname $(readlink -fm $0)))
TOPDIR=$(dirname $(dirname $(readlink -fm ${BASH_SOURCE[0]})))
<img src="/wiki/images/5/55/AOM-2721_build_env.png" _fck_mw_filename="AOM-2721 build env.png" _fck_mw_origimgwidth="811" _fck_mw_origimgheight="336" alt="RTENOTITLE" title="RTENOTITLE" style="vertical-align:middle;" />

Retrieved from "https://ess-wiki.advantech.com.tw/wiki/index.php?title=MIO-5355_Yocto_user_guide&oldid=41271"