ROM-5780 user guide

From ESS-WIKI
Jump to: navigation, search

Contents

資源特性(Features)

  • Rockchip RK3399 Arm dual Cortex-A72 and quad Cortex-A53 1.8 GHz
  • Onboard 2GB LPDDR4 memory and 16GB eMMC
  • Support HDMI2.0 4K 60fps, 1x DP, 1x eDP, 1 x LVDS
  • Support 4K H.264/H.265 Video decoder
  • 2 x USB3.0, 3 x USB2.0,1 x USB2,0 OTG, 3 x UART, 12 x GPIO
  • 1 x PCIe2.0, 1 x SATA, 1 x 4-lane MIPI CSI, Gigabit LAN
  • Support Debian Linux and Android

簡介(Introduction)

Advantech ROM-5780 SMARC 2.1 Computer-on-Module is powered by Rockchip RK3399 SOC which includes dual-core Arm Cortex-A72 and quad-core Arm Cortex-A53 processors
and Arm Mali-T860MP4 3D graphics engine. It provides rich display interface: HDMI 4K@60Hz, eDP and LVDS to meet different requirement. It also features USB3.0, PCIe 2.0, SATA,
Gigabit Ethernet, MIPI-CSI for embedded applications. It is the ideal solution for POS, vending, infotainment, Medical.
ROM-5780 is paired with the Advantech ROM-DB5901 SMARC2.0 development board for faster end product peripheral integration and time-to-market. The reference schematics and
layout checklist documentations for carrier board development will be provided along with the open-sourced Linux BSP, test utilities, hardware design utilities and reference drivers.

 

訂購資訊(Ordering Information)

RTENOTITLE

 

規格(Specifications)

ROM-5780 Specifications.png

框圖(Block Diagram)

ROM-5780 Block Diagram.png

接口布局和尺寸(Layout and Sizes)

ROM-5780 接口布局圖 Board Dimension Layout 

RTENOTITLE

Board Connectors

The board has one switch that allows you to configure your system.

ROM-5780 Board.png

Connector List

Switch

Position Description
SW1 UART & Debug Port selection
SW2 AT& ATX mode selection

SW1: UART & Debug Port Selection

Setting Function
SW1(2-3) Normal UART
SW1(2-1) Debug Console (Default)

SW2: AT/ATX Mode Selection

Setting Function
SW2(2-3) AT Mode (Default)
SW2(2-1) ATX Mode

 

ROM-DB5901 接口布局圖 Board Dimension Layout

RTENOTITLE

RTENOTITLE

 

主板内置插针式引脚排序方式 (Pin Header defination) 

Internal I/O

RTENOTITLE

Position Description Connector Type
BAT1 PIN Header for Battery WAFER 8P 2.54mm 180D(M) DIP
A2543WV2-8P
BH1 RTC Battery Holder BATTERY HOLDER 24.9*23.4*8.9
CR2032 BH800.4GG
CAN1 CANBus Port 1 BOX HEADER 5x2P 2.54mm 180D(M)
DIP 23N6960-10S10
CAN2 CANBus Port 2 BOX HEADER 5x2P 2.54mm 180D(M)
DIP 23N6960-10S10
COM1 COM Port 1 BOX HEADER 5x2P 2.54mm 180D(M)
DIP 23N6960-10S10
COM3 COM Port 3 (Debug Port) BOX HEADER 5x2P 2.54mm 180D(M)
DIP 23N6960-10S10
CN4 PCIex1 Connector 1 PCIEXPRESS 36P 180D(F) DIP
2EG01817-D2D-DF
CN5 PCIex1 Connector 2 PCIEXPRESS 36P 180D(F) DIP
2EG01817-D2D-DF
CN6 PCIex1 Connector 3 PCIEXPRESS 36P 180D(F) DIP
2EG01817-D2D-DF
CN11 SATA Connector Serial ATA 7P 1.27mm 180D(M) DIP
WATM-07DBN4A3B8
CN12 SATA Power Connector WAFER 4P 2.5mm 180D(M) DIP
24W1161-04S10-01T
CN22 GPIOx8 sets PIN HEADER 10x2P 2.0mm 180D(M)
DIP 21N22050
CN25 MXM 3.0 Connector MXM Conn. 314P 90D(F) SMD
AS0B821-S78B-7H
CN26 M.2 Key E Slots NGFF 75P 0.5mm 90D(F) H=4.2mm
SMD AS0BC21-S40BE
CN38 FAN (Reserved) WTB Con. 3P 2.54mm 180D(M) DIP
A2543WV0-3P-6T-5e
CN39 MIPI-CSI1 (FPC, 4-Lane FPC 39P, 0.6mm, H0.9mm
CN40 MIPI-CSI0 (FPC, 2-Lane) FPC 39P, 0.6mm, H0.9mm
CN41 MIPI-CSI0 (Mini-SAS, 2-Lane) Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/
S/BK/W
CN42 MIPI-CSI1 (Mini-SAS, 4-Lane) Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/
S/BK/W
ESPI_CN1 ESPI PIN HEADER 6x2P 2.0mm180D(M) SMD
21N22050-12M00B
I2C_GP_1 I2C Pin Header WAFER BOX 4P 2.00mm 180D(M) DIP
721-81-04TW00
I2C_CN3 Audio Codec Board PIN HEADER 2x10P 2.54mm 180D(M)
DIP 21N22564
LVDS0 LVDS0 Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/
S/WH/W
LVDS_BK_PWR LVDS0 Back Light WAFER BOX 5P 2.0mm 180D(M) DIP
A2001WV2-5P
LVDS1 LVDS1 Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/
S/WH/W
LVDS1_BK_PWR LVDS1 Back Light WAFER BOX 5P 2.0mm 180D(M) DIP
A2001WV2-5P
SD1 SD Card Slot SD CARD 9P 90D(F) SMD WK2192CS3D-
7H
SPI_CN1 SPI Pin Header PIN HEADER 4x2P 2.54mm 180D(M)
SMD 21N22564
SW2 Reset Button TACT SW STS-091 SMD 4P H=3.8mm
SW4 SLP Button TACT SW STS-091 SMD 4P H=3.8mm
SW5 Power Button TACT SW STS-091 SMD 4P H=3.8mm
USB0_OTG1 USB OTG Micro USB 5P/0.65mm/(F)/NY9T/GFL/
RA/S/BK/B
USB-4-5 USB Port 4, Port 5 PIN HEADER 2x5P 2.0mm 180D(M)
SMD 21N22050

 

 

Rear I/O 

RTENOTITLE

Position Description Name
DCIN DC Jack A
CN15A UART Port 0 B
CN15B UART Port 2 C
CN1A DP Port D
CN1B HDMI Port E
CN33 Type C Controller Programming Header (Reserved Only) F
CN34 USB Type C G
CN8 GbE Ethernet Connector Port H
CN3 USB Port 1/ 2 I
Audio1 MIC Input/ Audio Output J

接口引脚定義 (Pin definitions)

机械尺寸  (Mechanical Characteristics)

  • Dimensions: SMARC form factor size: (D x W) 82 x 50 mm/ 3.22 x 1.9 in
  • Height on Top: Under 3.0 mm base on SPEC definition (without heat sink)
  • Height on Bottom: Under 1.3 mm base on SPEC definition

       ROM-5780 1 Mechanical.png

 

ROM-5780 2 Mechanical.png


快速入门 (Quick Start)

系统下载 (OS Download)

DS-100

Linux 燒錄方法 (Linux Flash eMMC Method)

 

Debug 串口調試 (Debug port Setting)

以 Tera Term  为例介绍如何使用串口调试功能

   Baud Rate波特率:115200
   Data 数据位:8
   Parity 奇偶校验:无
   Stop 停止位:1
   Flow Control流控:无
 

Tera Term Tool 

RTENOTITLE

RTENOTITLE

Check the Sriel port in Device Manager (查看PC端的串口号):

if you can not identify the Serial device , please check your serial driver. 

RTENOTITLE

Debug port connection (串口連接) 

RTENOTITLE

 

Log into Terminal  Tool (进入串口调试终端):

 


Linux系统的基本使用(Linux System Basic Operating Method)

      Display Setting (ROM-5780)

           U-boot Command :

                   

乙太網路使用方法(Ethernent Testing Method)

Command : ifconfig 

 

Command: Ping - I eth1 8.8.8.8  or Ping - I eth0 8.8.8.8  

 

WiFi使用方法(WIFI Testing Method)

Command : 

# killall wpa_supplicant
# ifconfig wlan0 up
# wpa_passphrase "SSID" "PASSWORD" > /tmp/wpa.conf
# wpa_supplicant -BDwext -iwlan0 -c/tmp/wpa.conf
# udhcpc -b -i wlan0'''

ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=54 time=2.10 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=54 time=2.10 ms

RTENOTITLE

4G使用方法(4G Testing Method)

Command:
Test 4G: (EWM-C117FL06E - USB)
Step 1: Connect EWM-C117FL06E to Mini PCIE slot on 9680015491 and connect
the card to CN6 PCIe_D slot on ROM-DB5901.
Step 2: Connect the antenna 1750007990-01 to the SMA (F) connector on
9680015491
and connect the IPEX connector to MT1 on EWM-C117FL06E module.
Step 3: Connect the Mini USB cable from 9680015491 to USB 2.0 Type A port on
ROM-DB5901.
Step 4: Power on and execute the pppd command to connect to the network.

RTENOTITLE

RTENOTITLE

GPIO使用方法(GPIO Operating Method)

 

串口使用方法(Serial Port Operating Method)

RS-232 Test

SER1_UART2: /dev/ttyLP2: COM1

SER3_UART0: /dev/ttyLP0: COM3

SW6/7 Setting (SW6/7設置) 

RS232: 1:on  2:off

RS422: 1:on  2:on

RS485: 1:off  2:on

RTENOTITLE

COM0 (CN15A): UART1 test

Loopback Test (eg. ttyLP1)
UART 1: Change SW7 jumper to switch modes. (1ON 2OFF: RS-232)

UART 1: Change CN27~CN30 jumper to (1-2 short)

# stty -F /dev/ttyLP1 -echo -onlcr 115200
# cat /dev/ttyLP1 &
# echo test > /dev/ttyLP1

蓝牙使用方法(BlueTooth Operating Method)

Command : 

$ hciconfig hci0 up
$ bluetoothctl
$ discoverable on
$ pairable on
$ scan on
[NEW] FC:18:3C:8D:75:F4 myphone
$ scan off
$ pair FC:18:3C:8D:75:F4
$ connect FC:18:3C:8D:75:F4

RTENOTITLE

  遠程訪問及文件傳輸(Remote Access and File Transimmion)

              查看主板IP位址 ( Chech IP Address ):

        Command : ifconfig

 

Windows下SSH访问及文件传输

SSH Remote Log into Device 

  • SSH远程登录,以putty选择putty.exe(或者使用Xshell、SecureCRT等类似软件)
  • 需要设置远程设备的IP、通讯端口(默认22)、通讯方式,登录后验证用户名密码

 

RTENOTITLE

RTENOTITLE

 

RTENOTITLE

通用方法(General Method)

      查看CPU温度(Check CPU Temperature)

     /# cat /sys/devices/virtual/thermal/thermal_zone0/temp 44600

    # 或者直接以度爲單位顯示 echo $[$(cat /sys/class/thermal/thermal_zone0/temp)/1000]° >>> 45°

      查看CPU频率(Check CPU Frequency)

           cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq 
           >> 900000
           cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq    
           >> 1200000

      查看内存容量(Check Memory Capacity)

 

      查看存储容量(Check Storage Capacity)

 

      網路Ping測試(Ping Network Testing)

     ping 8.8.8.8
     PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
     64 bytes from 8.8.8.8: icmp_seq=1 ttl=54 time=2.10 ms
     64 bytes from 8.8.8.8: icmp_seq=2 ttl=54 time=2.10 ms

      設置RTC (RTC Setting) 

 

         

Linux BSP編譯方法(Linux BSP Compile Method)

如果有驗證上的錯誤 請使用以下的方法

### repo sync failed with Server certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none
============================================================
export GIT_SSL_NO_VERIFY=1
#or
git config --global http.sslverify false
============================================================