Difference between revisions of "ROM-5780 user guide"

From ESS-WIKI
Jump to: navigation, search
(→‎      查看内存容量(Check Memory Capacity))
 
(12 intermediate revisions by 2 users not shown)
Line 1: Line 1:
  
−
== '''資源特性(Features)''' ==
+
== '''產品介紹(Product introduction )''' ==
 +
 
 +
=== '''產品特性(Product Features)''' ===
  
 
*Rockchip RK3399 Arm dual Cortex-A72 and quad Cortex-A53 1.8 GHz  
 
*Rockchip RK3399 Arm dual Cortex-A72 and quad Cortex-A53 1.8 GHz  
Line 10: Line 12:
 
*Support Debian Linux and Android  
 
*Support Debian Linux and Android  
  
−
== '''簡介（Introduction）''' ==
+
=== '''產品官網連結(Product official website link) ''' ===
  
−
Advantech ROM-5780 SMARC 2.1 Computer-on-Module is powered by Rockchip RK3399 SOC which includes dual-core Arm Cortex-A72 and quad-core Arm Cortex-A53 processors<br/> and Arm Mali-T860MP4 3D graphics engine. It provides rich display interface: HDMI 4K@60Hz, eDP and LVDS to meet different requirement. It also features USB3.0, PCIe 2.0, SATA,<br/> Gigabit Ethernet, MIPI-CSI for embedded applications. It is the ideal solution for POS, vending, infotainment, Medical.<br/> ROM-5780 is paired with the Advantech ROM-DB5901 SMARC2.0 development board for faster end product peripheral integration and time-to-market. The reference schematics and<br/> layout checklist documentations for carrier board development will be provided along with the open-sourced Linux BSP, test utilities, hardware design utilities and reference drivers.
+
[https://www.advantech.com/zh-tw/products/77b59009-31a9-4751-bee1-45827a844421/rom-5780/mod_74c37d9d-d50c-4d67-a802-952cd5c78d47 '''ROM-5780''']
 +
 
 +
== '''接口布局和尺寸(Layout and Sizes)''' ==
 +
 
 +
=== '''ROM-5780 接口布局圖&nbsp;Board Dimension Layout&nbsp;''' ===
  
 +
[[File:ROM-5780 module board.jpg|RTENOTITLE]]
  
−
== '''訂購資訊(Ordering Information)''' ==
+
=== '''Board Connectors''' ===
  
−
[[File:ROM-5780 orderinfo.jpg|RTENOTITLE]]
+
'''The board has one switch that allows you to configure your system.'''
  
 +
<span style="color:#e74c3c;">[[File:ROM-5780 Board.png|RTENOTITLE]]</span>
  
−
== '''規格（Specifications）''' ==
+
=== '''Connector List''' ===
  
−
<span style="color:#e74c3c;">插一張Specifications圖片</span>
+
'''Switch'''
  
−
== '''框圖（Block Diagram）''' ==
+
{| border="1" cellpadding="1" cellspacing="1" style="width: 500px;"
 +
|-
 +
| '''Position'''
 +
| '''Description'''
 +
|-
 +
| SW1
 +
| UART & Debug Port selection
 +
|-
 +
| SW2
 +
| AT& ATX mode selection
 +
|}
  
−
<span style="color:#e74c3c;">插一張Block Diagram圖片</span>
+
'''SW1: UART & Debug Port Selection'''
  
−
== '''接口布局和尺寸(Layout and Sizes)''' ==
+
{| border="1" cellpadding="1" cellspacing="1" style="width: 500px;"
 +
|-
 +
| '''Setting'''
 +
| '''Function'''
 +
|-
 +
| SW1(2-3)
 +
| Normal UART
 +
|-
 +
| SW1(2-1)
 +
| Debug Console (Default)
 +
|}
  
 +
'''SW2: AT/ATX Mode Selection'''
  
−
=== '''ROM-5780 接口布局圖&nbsp;Board Dimension Layout&nbsp;''' ===
+
{| border="1" cellpadding="1" cellspacing="1" style="width: 500px;"
 +
|-
 +
| '''Setting'''
 +
| '''Function'''
 +
|-
 +
| SW2(2-3)
 +
| AT Mode (Default)
 +
|-
 +
| SW2(2-1)
 +
| ATX Mode
 +
|}
  
−
[[File:ROM-5780 module board.jpg|RTENOTITLE]]
+
&nbsp;
  
 
=== '''ROM-DB5901&nbsp;接口布局圖&nbsp;Board Dimension Layout''' ===
 
=== '''ROM-DB5901&nbsp;接口布局圖&nbsp;Board Dimension Layout''' ===
Line 41: Line 80:
 
[[File:ROM-DB5901 IO.jpg|RTENOTITLE]]
 
[[File:ROM-DB5901 IO.jpg|RTENOTITLE]]
  
−
 
+
&nbsp;
  
 
=== '''主板内置插针式引脚排序方式 (Pin Header defination)&nbsp;''' ===
 
=== '''主板内置插针式引脚排序方式 (Pin Header defination)&nbsp;''' ===
Line 49: Line 88:
 
[[File:ROM-DB5901 IO2.jpg|RTENOTITLE]]
 
[[File:ROM-DB5901 IO2.jpg|RTENOTITLE]]
  
−
{| border="1" cellspacing="1" cellpadding="1"
+
{| border="1" cellpadding="1" cellspacing="1"
 
|-
 
|-
 
| '''Position'''
 
| '''Position'''
Line 56: Line 95:
 
|-
 
|-
 
| BAT1
 
| BAT1
−
| PIN Header for Battery<br/>
+
| PIN Header for Battery
−
| WAFER 8P 2.54mm 180D(M) DIP<br/>A2543WV2-8P<br/>
+
| WAFER 8P 2.54mm 180D(M) DIP<br/> A2543WV2-8P
 
|-
 
|-
 
| BH1
 
| BH1
−
| RTC Battery Holder<br/>
+
| RTC Battery Holder
−
| BATTERY HOLDER 24.9*23.4*8.9<br/>CR2032 BH800.4GG<br/>
+
| BATTERY HOLDER 24.9*23.4*8.9<br/> CR2032 BH800.4GG
 
|-
 
|-
 
| CAN1
 
| CAN1
−
| CANBus Port 1<br/>
+
| CANBus Port 1
−
| BOX HEADER 5x2P 2.54mm 180D(M)<br/>DIP 23N6960-10S10<br/>
+
| BOX HEADER 5x2P 2.54mm 180D(M)<br/> DIP 23N6960-10S10
 
|-
 
|-
 
| CAN2
 
| CAN2
−
| CANBus Port 2<br/>
+
| CANBus Port 2
−
| BOX HEADER 5x2P 2.54mm 180D(M)<br/>DIP 23N6960-10S10<br/>
+
| BOX HEADER 5x2P 2.54mm 180D(M)<br/> DIP 23N6960-10S10
 
|-
 
|-
 
| COM1
 
| COM1
−
| COM Port 1<br/>
+
| COM Port 1
−
| BOX HEADER 5x2P 2.54mm 180D(M)<br/>DIP 23N6960-10S10<br/>
+
| BOX HEADER 5x2P 2.54mm 180D(M)<br/> DIP 23N6960-10S10
 
|-
 
|-
 
| COM3
 
| COM3
−
| COM Port 3 (Debug Port)<br/>
+
| COM Port 3 (Debug Port)
−
| BOX HEADER 5x2P 2.54mm 180D(M)<br/>DIP 23N6960-10S10<br/>
+
| BOX HEADER 5x2P 2.54mm 180D(M)<br/> DIP 23N6960-10S10
 
|-
 
|-
 
| CN4
 
| CN4
−
| PCIex1 Connector 1<br/>
+
| PCIex1 Connector 1
−
| PCIEXPRESS 36P 180D(F) DIP<br/>2EG01817-D2D-DF<br/>
+
| PCIEXPRESS 36P 180D(F) DIP<br/> 2EG01817-D2D-DF
 
|-
 
|-
 
| CN5
 
| CN5
−
| PCIex1 Connector 2<br/>
+
| PCIex1 Connector 2
−
| PCIEXPRESS 36P 180D(F) DIP<br/>2EG01817-D2D-DF<br/>
+
| PCIEXPRESS 36P 180D(F) DIP<br/> 2EG01817-D2D-DF
 
|-
 
|-
 
| CN6
 
| CN6
−
| PCIex1 Connector 3<br/>
+
| PCIex1 Connector 3
−
| PCIEXPRESS 36P 180D(F) DIP<br/>2EG01817-D2D-DF<br/>
+
| PCIEXPRESS 36P 180D(F) DIP<br/> 2EG01817-D2D-DF
 
|-
 
|-
 
| CN11
 
| CN11
−
| SATA Connector<br/>
+
| SATA Connector
−
| Serial ATA 7P 1.27mm 180D(M) DIP<br/>WATM-07DBN4A3B8<br/>
+
| Serial ATA 7P 1.27mm 180D(M) DIP<br/> WATM-07DBN4A3B8
 
|-
 
|-
 
| CN12
 
| CN12
−
| SATA Power Connector<br/>
+
| SATA Power Connector
−
| WAFER 4P 2.5mm 180D(M) DIP<br/>24W1161-04S10-01T<br/>
+
| WAFER 4P 2.5mm 180D(M) DIP<br/> 24W1161-04S10-01T
 
|-
 
|-
 
| CN22
 
| CN22
−
| GPIOx8 sets<br/>
+
| GPIOx8 sets
−
| PIN HEADER 10x2P 2.0mm 180D(M)<br/>DIP 21N22050<br/>
+
| PIN HEADER 10x2P 2.0mm 180D(M)<br/> DIP 21N22050
 
|-
 
|-
 
| CN25
 
| CN25
−
| MXM 3.0 Connector<br/>
+
| MXM 3.0 Connector
−
| MXM Conn. 314P 90D(F) SMD<br/>AS0B821-S78B-7H<br/>
+
| MXM Conn. 314P 90D(F) SMD<br/> AS0B821-S78B-7H
 
|-
 
|-
 
| CN26
 
| CN26
−
| M.2 Key E Slots<br/>
+
| M.2 Key E Slots
−
| NGFF 75P 0.5mm 90D(F) H=4.2mm<br/>SMD AS0BC21-S40BE<br/>
+
| NGFF 75P 0.5mm 90D(F) H=4.2mm<br/> SMD AS0BC21-S40BE
 
|-
 
|-
 
| CN38
 
| CN38
 
| FAN (Reserved)
 
| FAN (Reserved)
−
| WTB Con. 3P 2.54mm 180D(M) DIP<br/>A2543WV0-3P-6T-5e<br/>
+
| WTB Con. 3P 2.54mm 180D(M) DIP<br/> A2543WV0-3P-6T-5e
 
|-
 
|-
 
| CN39
 
| CN39
−
| MIPI-CSI1 (FPC, 4-Lane<br/>
+
| MIPI-CSI1 (FPC, 4-Lane
−
| FPC 39P, 0.6mm, H0.9mm<br/>
+
| FPC 39P, 0.6mm, H0.9mm
 
|-
 
|-
 
| CN40
 
| CN40
−
| MIPI-CSI0 (FPC, 2-Lane)<br/>
+
| MIPI-CSI0 (FPC, 2-Lane)
−
| FPC 39P, 0.6mm, H0.9mm<br/>
+
| FPC 39P, 0.6mm, H0.9mm
 
|-
 
|-
 
| CN41
 
| CN41
−
| MIPI-CSI0 (Mini-SAS, 2-Lane)<br/>
+
| MIPI-CSI0 (Mini-SAS, 2-Lane)
−
| Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/<br/>S/BK/W<br/>
+
| Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/<br/> S/BK/W
 
|-
 
|-
 
| CN42
 
| CN42
−
| MIPI-CSI1 (Mini-SAS, 4-Lane)<br/>
+
| MIPI-CSI1 (Mini-SAS, 4-Lane)
−
| Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/<br/>S/BK/W<br/>
+
| Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/<br/> S/BK/W
 
|-
 
|-
 
| ESPI_CN1
 
| ESPI_CN1
−
| ESPI<br/>
+
| ESPI
−
| PIN HEADER 6x2P 2.0mm180D(M) SMD<br/>21N22050-12M00B<br/>
+
| PIN HEADER 6x2P 2.0mm180D(M) SMD<br/> 21N22050-12M00B
 
|-
 
|-
 
| I2C_GP_1
 
| I2C_GP_1
−
| I2C Pin Header<br/>
+
| I2C Pin Header
−
| WAFER BOX 4P 2.00mm 180D(M) DIP<br/>721-81-04TW00<br/>
+
| WAFER BOX 4P 2.00mm 180D(M) DIP<br/> 721-81-04TW00
 
|-
 
|-
 
| I2C_CN3
 
| I2C_CN3
−
| Audio Codec Board<br/>
+
| Audio Codec Board
−
| PIN HEADER 2x10P 2.54mm 180D(M)<br/>DIP 21N22564<br/>
+
| PIN HEADER 2x10P 2.54mm 180D(M)<br/> DIP 21N22564
 
|-
 
|-
 
| LVDS0
 
| LVDS0
−
| LVDS0<br/>
+
| LVDS0
−
| Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/<br/>S/WH/W<br/>
+
| Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/<br/> S/WH/W
 
|-
 
|-
 
| LVDS_BK_PWR
 
| LVDS_BK_PWR
−
| LVDS0 Back Light<br/>
+
| LVDS0 Back Light
−
| WAFER BOX 5P 2.0mm 180D(M) DIP<br/>A2001WV2-5P<br/>
+
| WAFER BOX 5P 2.0mm 180D(M) DIP<br/> A2001WV2-5P
 
|-
 
|-
 
| LVDS1
 
| LVDS1
−
| LVDS1<br/>
+
| LVDS1
−
| Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/<br/>S/WH/W<br/>
+
| Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/<br/> S/WH/W
 
|-
 
|-
 
| LVDS1_BK_PWR
 
| LVDS1_BK_PWR
−
| LVDS1 Back Light<br/>
+
| LVDS1 Back Light
−
| WAFER BOX 5P 2.0mm 180D(M) DIP<br/>A2001WV2-5P<br/>
+
| WAFER BOX 5P 2.0mm 180D(M) DIP<br/> A2001WV2-5P
 
|-
 
|-
 
| SD1
 
| SD1
−
| SD Card Slot<br/>
+
| SD Card Slot
−
| SD CARD 9P 90D(F) SMD WK2192CS3D-<br/>7H<br/>
+
| SD CARD 9P 90D(F) SMD WK2192CS3D-<br/> 7H
 
|-
 
|-
 
| SPI_CN1
 
| SPI_CN1
−
| SPI Pin Header<br/>
+
| SPI Pin Header
−
| PIN HEADER 4x2P 2.54mm 180D(M)<br/>SMD 21N22564<br/>
+
| PIN HEADER 4x2P 2.54mm 180D(M)<br/> SMD 21N22564
 
|-
 
|-
 
| SW2
 
| SW2
−
| Reset Button<br/>
+
| Reset Button
−
| TACT SW STS-091 SMD 4P H=3.8mm<br/>
+
| TACT SW STS-091 SMD 4P H=3.8mm
 
|-
 
|-
 
| SW4
 
| SW4
−
| SLP Button<br/>
+
| SLP Button
−
| TACT SW STS-091 SMD 4P H=3.8mm<br/>
+
| TACT SW STS-091 SMD 4P H=3.8mm
 
|-
 
|-
 
| SW5
 
| SW5
−
| Power Button<br/>
+
| Power Button
−
| TACT SW STS-091 SMD 4P H=3.8mm<br/>
+
| TACT SW STS-091 SMD 4P H=3.8mm
 
|-
 
|-
 
| USB0_OTG1
 
| USB0_OTG1
−
| USB OTG<br/>
+
| USB OTG
−
| Micro USB 5P/0.65mm/(F)/NY9T/GFL/<br/>RA/S/BK/B<br/>
+
| Micro USB 5P/0.65mm/(F)/NY9T/GFL/<br/> RA/S/BK/B
 
|-
 
|-
 
| USB-4-5
 
| USB-4-5
−
| USB Port 4, Port 5<br/>
+
| USB Port 4, Port 5
−
| PIN HEADER 2x5P 2.0mm 180D(M)<br/>SMD 21N22050<br/>
+
| PIN HEADER 2x5P 2.0mm 180D(M)<br/> SMD 21N22050
 
|}
 
|}
−
 
−
 
−
 
  
 
=== '''Rear I/O&nbsp;''' ===
 
=== '''Rear I/O&nbsp;''' ===
Line 253: Line 289:
 
*[[电源及指示灯和开关机复位按钮(Power_、LED、Power_Button、Reset_Button、Sleep_Button)|电源及指示灯和开关机复位按钮(Power&nbsp;、LED、Power Button、Reset Button、Sleep Button)&nbsp;]]  
 
*[[电源及指示灯和开关机复位按钮(Power_、LED、Power_Button、Reset_Button、Sleep_Button)|电源及指示灯和开关机复位按钮(Power&nbsp;、LED、Power Button、Reset Button、Sleep Button)&nbsp;]]  
 
*[[GPIO接口|GPIO接口]]  
 
*[[GPIO接口|GPIO接口]]  
−
*[[MINI_PCIE接口_M.2接口_SPI、I2C_接口|MINI_PCIE接口_M.2接口_SPI、I2C_接口]]
+
*[[MINI_PCIE接口_M.2接口_SPI、I2C_接口|MINI_PCIE接口_M.2接口_SPI、I2C_接口]]  
  
 
== '''机械尺寸&nbsp; ('''Mechanical Characteristics) ==
 
== '''机械尺寸&nbsp; ('''Mechanical Characteristics) ==
Line 261: Line 297:
 
*Height on Bottom: Under 1.3 mm base on SPEC definition  
 
*Height on Bottom: Under 1.3 mm base on SPEC definition  
  
−
<span style="color:#e74c3c;">插入兩張尺寸圖</span>
+
<font color="#e74c3c">&nbsp; &nbsp; &nbsp; &nbsp;[[File:ROM-5780 1 Mechanical.png|RTENOTITLE]]</font>
 +
 
 +
&nbsp;
 +
 
 +
<font color="#e74c3c">[[File:ROM-5780 2 Mechanical.png|RTENOTITLE]]</font>
  
 
----
 
----
  
 
== '''快速入门 (Quick Start)''' ==
 
== '''快速入门 (Quick Start)''' ==
 +
  
 
=== '''系统下载 (OS Download)''' ===
 
=== '''系统下载 (OS Download)''' ===
  
−
[https://pan.baidu.com/s/1Ht2OzxW4NgaZC0Gf69ikIA Baidu link for Debian10]&nbsp;Password：nvpp<br/>[https://www.dropbox.com/sh/pqnqaed8nuhd20m/AADJyRjFhLBD-IOpzTF3SYcda?dl=0 Dropbox link for Debian10]
+
Note：&nbsp;&nbsp;LIV=Yocto Linux,&nbsp;UIV=Ubuntu,&nbsp;DIV=Debian, AIV=Android
  
−
*'''Linux系统 (Linux OS)''''''&nbsp; &nbsp;'''
+
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; LBV=BSP, LIV=Image
  
−
{| border="2"
+
{| border="1" cellpadding="1" cellspacing="1"
 +
|-
 +
| '''Platform'''
 +
| '''Product'''
 +
| '''Image Version'''
 +
| '''Release Date'''
 +
| '''Release Version'''
 +
| '''Release notes'''
 +
| '''Image Download'''
 +
| '''BSP Download Tag'''
 +
| '''Comment'''
 
|-
 
|-
−
| align="center" | '''Version'''
 
−
| align="center" | '''Date'''
 
−
| align="center" | '''Product'''
 
−
| align="center" | '''CPU'''
 
−
| align="center" | '''Yocto3.0/Ubuntu18.04/Debian10'''
 
−
| align="center" | '''SDK'''
 
−
| align="center" | '''Components'''
 
−
| align="center" | '''Features'''
 
−
| align="center" | '''Modules'''
 
−
| align="center" | '''Test Report'''
 
−
| align="center" | '''Release'''
 
−
| align="center" | '''Release notes'''
 
−
| align="center" | '''Comment'''
 
−
|- valign="top"
 
−
| DIV251009<br/>
 
−
| 2021-03-25
 
−
| ROM-5780<br/>
 
 
| RK3399
 
| RK3399
−
| ROM5780A3AIM20DIV251009_2021-03-25.img.tgz<br/>
+
| ROM-5780
−
|  
+
| DIV251009
−
|  
+
| 2021/03/25
−
|  
+
| Bete
−
|
+
| [https://ess-wiki.advantech.com.tw/view/ROM-5780_Debian10_Release_Note Release_Note]
−
|
+
| [https://pan.baidu.com/s/1piPujfT9qOv4RQiiGb1KQQ Baidu]&nbsp;&nbsp; &nbsp; &nbsp;Password：a887
−
| Beta
+
[https://www.dropbox.com/sh/p1pgqhpowxzzucj/AAAgnCUqFyr7bCeNdFAWw17Ba?dl=0 Dropbox]
−
| [http://ess-wiki.advantech.com.tw/wiki/images/0/01/ROM-5780_Debian10_Release_note_2021-03-25.pdf Release Note]
+
 
 
| RK3399_RISC_DIV251009.xml
 
| RK3399_RISC_DIV251009.xml
 +
| &nbsp;
 +
|-
 +
| RK3399
 +
| ROM-5780 B1
 +
| DIV251029
 +
| 2022/03/15
 +
| GA
 +
| [https://ess-wiki.advantech.com.tw/view/ROM-5780_B1_Debain10_Release_Note Release_Note]
 +
| [https://pan.baidu.com/s/1mn8zGNEjWBQhG2-jN3PfRQ Baidu]&nbsp;&nbsp; &nbsp; &nbsp;Password：a887
 +
[https://www.dropbox.com/sh/48ibo57qi1usf3p/AADX9Q1olz6V7tD1Hl2fowPMa?dl=0 Dropbox]
 +
 +
| RK3399_RISC_DIV251029.xml
 +
| MP Version
 
|}
 
|}
  
−
----
+
*Alpha: &nbsp;Basic I/O function bring up by RD;
 +
 
 +
*Beta: &nbsp;Basic I/O function、performance and middleware verified by RD. Peripherals integrated;
 +
 
 +
*GA: &nbsp;Beta version by QE verification;
  
−
=== '''Linux&nbsp;燒錄方法 (Linux Flash eMMC Method)''' ===
+
*RTM: &nbsp;Beta version by SI/Power/QE verification and pre-loaded;
  
 +
DS-100
  
 +
*[[IoTGateway/BSP/Linux/Linux_BSP_User_Guide_Debian9_for_rk|Linux BSP User Guide for rk3399 series Debian9]]
 +
*[[IoTGateway/BSP/Linux/Linux_BSP_User_Guide_DeviceOn|Linux BSP User Guide for rk3399 series DeviceOn]]
 +
*[[IoTGateway/BSP/Linux/Linux_BSP_User_Guide_SGI|Linux BSP User Guide for SGI [DMS-SA53]]]
  
−
&nbsp;
+
=== '''Linux&nbsp;燒錄方法 (Linux Flash eMMC Method)''' ===
 +
 
 +
*[http://ess-wiki.advantech.com.tw/view/Debian_BSP_User_Guide_for_rk3399_series_risc(RSB4710). Linux BSP User Guide for rk3399 series Debian9/Debian10]
 +
*[http://ess-wiki.advantech.com.tw/view/Getting_Start_(RSB4710). Getting Start]
 +
*[http://ess-wiki.advantech.com.tw/view/MAC_Address MAC_Address]
 +
*[http://ess-wiki.advantech.com.tw/view/Qt5Creator <font color="#0066cc">Qt5Creator</font>]
 +
*[[Qt5Creator_toolchain_Qt_5.11.3|<font color="#0066cc">Qt5Creator_toolchain_Qt_5.11.3</font>]]
  
 
=== '''Debug 串口調試 (Debug port Setting)''' ===
 
=== '''Debug 串口調試 (Debug port Setting)''' ===
Line 320: Line 381:
 
&nbsp;  Stop 停止位：1
 
&nbsp;  Stop 停止位：1
 
   Flow Control流控：无</pre>
 
   Flow Control流控：无</pre>
−
 
−
:
 
  
 
Tera Term Tool&nbsp;
 
Tera Term Tool&nbsp;
Line 338: Line 397:
  
 
[[File:Debugcom3nn 2021-09-10 140320.jpg|RTENOTITLE]]
 
[[File:Debugcom3nn 2021-09-10 140320.jpg|RTENOTITLE]]
−
 
−
 
  
 
Log into Terminal&nbsp; Tool (进入串口调试终端)：
 
Log into Terminal&nbsp; Tool (进入串口调试终端)：
−
 
−
 
  
 
----
 
----
Line 349: Line 404:
 
== '''Linux系统的基本使用(Linux&nbsp;System Basic Operating Method)''' ==
 
== '''Linux系统的基本使用(Linux&nbsp;System Basic Operating Method)''' ==
  
−
=== '''&nbsp; &nbsp; &nbsp; Display Setting (ROM-5780)''' ===
+
=== '''Display Setting (ROM-5780)''' ===
−
 
 
−
'''&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;U-boot&nbsp;Command&nbsp;:'''
 
−
 
 
−
&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;
 
  
 
=== '''乙太網路使用方法(Ethernent Testing Method)''' ===
 
=== '''乙太網路使用方法(Ethernent Testing Method)''' ===
  
 
'''Command&nbsp;: ifconfig&nbsp;'''
 
'''Command&nbsp;: ifconfig&nbsp;'''
−
 
−
 
  
 
'''Command: Ping - I eth1 8.8.8.8&nbsp; or Ping - I eth0 8.8.8.8&nbsp;&nbsp;'''
 
'''Command: Ping - I eth1 8.8.8.8&nbsp; or Ping - I eth0 8.8.8.8&nbsp;&nbsp;'''
  
−
 
+
&nbsp;
  
 
=== '''WiFi使用方法(WIFI Testing Method)''' ===
 
=== '''WiFi使用方法(WIFI Testing Method)''' ===
Line 398: Line 447:
 
[[File:4GTest12021-09-09 133648.jpg|RTENOTITLE]]
 
[[File:4GTest12021-09-09 133648.jpg|RTENOTITLE]]
  
−
=== '''GPIO使用方法(GPIO Operating Method)''' ===
 
−
<pre />
 
 
=== '''串口使用方法(Serial Port Operating&nbsp;Method)''' ===
 
=== '''串口使用方法(Serial Port Operating&nbsp;Method)''' ===
  
Line 420: Line 467:
 
COM0 (CN15A): UART1 test
 
COM0 (CN15A): UART1 test
  
−
Loopback Test (eg. ttyLP1)<br/>UART 1: Change SW7 jumper to switch modes. (1ON 2OFF: RS-232)
+
Loopback Test (eg. ttyLP1)<br/> UART 1: Change SW7 jumper to switch modes. (1ON 2OFF: RS-232)
  
 
UART 1: Change CN27~CN30 jumper to (1-2 short)
 
UART 1: Change CN27~CN30 jumper to (1-2 short)
Line 445: Line 492:
  
 
'''&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 查看主板IP位址&nbsp;(&nbsp;Chech IP Address )：'''​
 
'''&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 查看主板IP位址&nbsp;(&nbsp;Chech IP Address )：'''​
−
<pre>        Command&nbsp;: ifconfig</pre>
+
<pre>        Command&nbsp;: ifconfig
−
 
+
</pre>
−
 
 
  
 
==== Windows下SSH访问及文件传输 ====
 
==== Windows下SSH访问及文件传输 ====
Line 453: Line 499:
 
SSH Remote Log into Device&nbsp;
 
SSH Remote Log into Device&nbsp;
  
−
*SSH远程登录,以putty选择putty.exe(或者使用Xshell、SecureCRT等类似软件)
+
*SSH远程登录,以putty选择putty.exe(或者使用Xshell、SecureCRT等类似软件)  
−
*需要设置远程设备的IP、通讯端口(默认22)、通讯方式，登录后验证用户名密码
+
*需要设置远程设备的IP、通讯端口(默认22)、通讯方式，登录后验证用户名密码  
−
 
 
−
 
 
  
 
[[File:SSHsettingdetail.png|RTENOTITLE]]
 
[[File:SSHsettingdetail.png|RTENOTITLE]]
Line 462: Line 506:
 
[[File:SSHSetting2021-09-10 143631.jpg|RTENOTITLE]]
 
[[File:SSHSetting2021-09-10 143631.jpg|RTENOTITLE]]
  
−
 
+
&nbsp;
  
 
[[File:Sshsetting12021-09-10 143743n.jpg|RTENOTITLE]]
 
[[File:Sshsetting12021-09-10 143743n.jpg|RTENOTITLE]]
Line 468: Line 512:
 
== '''通用方法(General Method)''' ==
 
== '''通用方法(General Method)''' ==
  
−
=== &nbsp; '''&nbsp; &nbsp; 查看CPU温度(Check CPU Temperature)''' ===
+
=== &nbsp; &nbsp; &nbsp; &nbsp;'''查看CPU温度(Check CPU Temperature)''' ===
 
<pre>    /# cat /sys/devices/virtual/thermal/thermal_zone0/temp 44600
 
<pre>    /# cat /sys/devices/virtual/thermal/thermal_zone0/temp 44600
  
Line 479: Line 523:
 
           >> 1200000</pre>
 
           >> 1200000</pre>
  
−
=== '''&nbsp; &nbsp; &nbsp;&nbsp;查看内存容量(Check Memory&nbsp;Capacity)''' ===
+
 
−
<pre />
+
=== '''&nbsp; &nbsp; &nbsp;&nbsp;读取DDR频率（Read DDR frequency)''' ===
 +
<pre># cat /sys/class/devfreq/dmc/cur_freq
 +
856000000</pre>
 +
 
 +
&nbsp;
 +
 
 
=== '''&nbsp; &nbsp; &nbsp;&nbsp;查看存储容量(Check Storage Capacity)''' ===
 
=== '''&nbsp; &nbsp; &nbsp;&nbsp;查看存储容量(Check Storage Capacity)''' ===
−
<pre />
+
<pre>&nbsp;</pre>
 +
 
 
=== '''&nbsp; &nbsp; &nbsp; 網路Ping測試(Ping Network Testing)''' ===
 
=== '''&nbsp; &nbsp; &nbsp; 網路Ping測試(Ping Network Testing)''' ===
 
<pre>    ping 8.8.8.8
 
<pre>    ping 8.8.8.8
Line 490: Line 540:
  
 
=== '''&nbsp; &nbsp; &nbsp; 設置RTC (RTC Setting)&nbsp;''' ===
 
=== '''&nbsp; &nbsp; &nbsp; 設置RTC (RTC Setting)&nbsp;''' ===
−
<pre>   </pre>
+
<pre>&nbsp;</pre>
  
 
'''&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;'''
 
'''&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;'''
  
 
== '''Linux&nbsp;BSP編譯方法(Linux&nbsp;BSP Compile Method)''' ==
 
== '''Linux&nbsp;BSP編譯方法(Linux&nbsp;BSP Compile Method)''' ==
 +
 +
=== [http://ess-wiki.advantech.com.tw/view/Debian_BSP_User_Guide_for_rk3399_risc_series Debian 10]&nbsp; ===
 +
 +
=== [http://ess-wiki.advantech.com.tw/view/Debian_BSP_User_Guide_for_rk3399_risc_series Debian 9&nbsp;] ===
  
 
=== '''如果有驗證上的錯誤 請使用以下的方法''' ===
 
=== '''如果有驗證上的錯誤 請使用以下的方法''' ===
  
−
<u>'''### repo sync failed with Server certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none<br/>============================================================<br/>export GIT_SSL_NO_VERIFY=1<br/>#or<br/>git config --global http.sslverify false<br/>============================================================'''</u>
+
<u>'''### repo sync failed with Server certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none<br/> ============================================================<br/> export GIT_SSL_NO_VERIFY=1<br/> #or<br/> git config --global http.sslverify false<br/> ============================================================'''</u>
 +
 
 +
&nbsp;
 +
 
 +
{| border="0" cellpadding="10" cellspacing="0" style="width:100%;"
 +
|-
 +
| <iframe height="230" key="advonline" level="campaign" path="en/aim-linux_community/" width="100%"></iframe>
 +
|}

Latest revision as of 01:58, 25 April 2024

Contents

產品介紹(Product introduction )

產品特性(Product Features)

  • Rockchip RK3399 Arm dual Cortex-A72 and quad Cortex-A53 1.8 GHz
  • Onboard 2GB LPDDR4 memory and 16GB eMMC
  • Support HDMI2.0 4K 60fps, 1x DP, 1x eDP, 1 x LVDS
  • Support 4K H.264/H.265 Video decoder
  • 2 x USB3.0, 3 x USB2.0,1 x USB2,0 OTG, 3 x UART, 12 x GPIO
  • 1 x PCIe2.0, 1 x SATA, 1 x 4-lane MIPI CSI, Gigabit LAN
  • Support Debian Linux and Android

產品官網連結(Product official website link) 

ROM-5780

接口布局和尺寸(Layout and Sizes)

ROM-5780 接口布局圖 Board Dimension Layout 

RTENOTITLE

Board Connectors

The board has one switch that allows you to configure your system.

RTENOTITLE

Connector List

Switch

Position Description
SW1 UART & Debug Port selection
SW2 AT& ATX mode selection

SW1: UART & Debug Port Selection

Setting Function
SW1(2-3) Normal UART
SW1(2-1) Debug Console (Default)

SW2: AT/ATX Mode Selection

Setting Function
SW2(2-3) AT Mode (Default)
SW2(2-1) ATX Mode

 

ROM-DB5901 接口布局圖 Board Dimension Layout

RTENOTITLE

RTENOTITLE

 

主板内置插针式引脚排序方式 (Pin Header defination) 

Internal I/O

RTENOTITLE

Position Description Connector Type
BAT1 PIN Header for Battery WAFER 8P 2.54mm 180D(M) DIP
A2543WV2-8P
BH1 RTC Battery Holder BATTERY HOLDER 24.9*23.4*8.9
CR2032 BH800.4GG
CAN1 CANBus Port 1 BOX HEADER 5x2P 2.54mm 180D(M)
DIP 23N6960-10S10
CAN2 CANBus Port 2 BOX HEADER 5x2P 2.54mm 180D(M)
DIP 23N6960-10S10
COM1 COM Port 1 BOX HEADER 5x2P 2.54mm 180D(M)
DIP 23N6960-10S10
COM3 COM Port 3 (Debug Port) BOX HEADER 5x2P 2.54mm 180D(M)
DIP 23N6960-10S10
CN4 PCIex1 Connector 1 PCIEXPRESS 36P 180D(F) DIP
2EG01817-D2D-DF
CN5 PCIex1 Connector 2 PCIEXPRESS 36P 180D(F) DIP
2EG01817-D2D-DF
CN6 PCIex1 Connector 3 PCIEXPRESS 36P 180D(F) DIP
2EG01817-D2D-DF
CN11 SATA Connector Serial ATA 7P 1.27mm 180D(M) DIP
WATM-07DBN4A3B8
CN12 SATA Power Connector WAFER 4P 2.5mm 180D(M) DIP
24W1161-04S10-01T
CN22 GPIOx8 sets PIN HEADER 10x2P 2.0mm 180D(M)
DIP 21N22050
CN25 MXM 3.0 Connector MXM Conn. 314P 90D(F) SMD
AS0B821-S78B-7H
CN26 M.2 Key E Slots NGFF 75P 0.5mm 90D(F) H=4.2mm
SMD AS0BC21-S40BE
CN38 FAN (Reserved) WTB Con. 3P 2.54mm 180D(M) DIP
A2543WV0-3P-6T-5e
CN39 MIPI-CSI1 (FPC, 4-Lane FPC 39P, 0.6mm, H0.9mm
CN40 MIPI-CSI0 (FPC, 2-Lane) FPC 39P, 0.6mm, H0.9mm
CN41 MIPI-CSI0 (Mini-SAS, 2-Lane) Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/
S/BK/W
CN42 MIPI-CSI1 (Mini-SAS, 4-Lane) Mini SAS 36P/0.8mm/(M)/LCP/VA/G15u/
S/BK/W
ESPI_CN1 ESPI PIN HEADER 6x2P 2.0mm180D(M) SMD
21N22050-12M00B
I2C_GP_1 I2C Pin Header WAFER BOX 4P 2.00mm 180D(M) DIP
721-81-04TW00
I2C_CN3 Audio Codec Board PIN HEADER 2x10P 2.54mm 180D(M)
DIP 21N22564
LVDS0 LVDS0 Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/
S/WH/W
LVDS_BK_PWR LVDS0 Back Light WAFER BOX 5P 2.0mm 180D(M) DIP
A2001WV2-5P
LVDS1 LVDS1 Wafer 2x20P/1.25mm/(M)/NY9T/VA/GFL/
S/WH/W
LVDS1_BK_PWR LVDS1 Back Light WAFER BOX 5P 2.0mm 180D(M) DIP
A2001WV2-5P
SD1 SD Card Slot SD CARD 9P 90D(F) SMD WK2192CS3D-
7H
SPI_CN1 SPI Pin Header PIN HEADER 4x2P 2.54mm 180D(M)
SMD 21N22564
SW2 Reset Button TACT SW STS-091 SMD 4P H=3.8mm
SW4 SLP Button TACT SW STS-091 SMD 4P H=3.8mm
SW5 Power Button TACT SW STS-091 SMD 4P H=3.8mm
USB0_OTG1 USB OTG Micro USB 5P/0.65mm/(F)/NY9T/GFL/
RA/S/BK/B
USB-4-5 USB Port 4, Port 5 PIN HEADER 2x5P 2.0mm 180D(M)
SMD 21N22050

Rear I/O 

RTENOTITLE

Position Description Name
DCIN DC Jack A
CN15A UART Port 0 B
CN15B UART Port 2 C
CN1A DP Port D
CN1B HDMI Port E
CN33 Type C Controller Programming Header (Reserved Only) F
CN34 USB Type C G
CN8 GbE Ethernet Connector Port H
CN3 USB Port 1/ 2 I
Audio1 MIC Input/ Audio Output J

接口引脚定義 (Pin definitions)

机械尺寸  (Mechanical Characteristics)

  • Dimensions: SMARC form factor size: (D x W) 82 x 50 mm/ 3.22 x 1.9 in
  • Height on Top: Under 3.0 mm base on SPEC definition (without heat sink)
  • Height on Bottom: Under 1.3 mm base on SPEC definition

       RTENOTITLE

 

RTENOTITLE

快速入门 (Quick Start)

系统下载 (OS Download)

Note：  LIV=Yocto Linux, UIV=Ubuntu, DIV=Debian, AIV=Android

             LBV=BSP, LIV=Image

Platform Product Image Version Release Date Release Version Release notes Image Download BSP Download Tag Comment
RK3399 ROM-5780 DIV251009 2021/03/25 Bete Release_Note Baidu      Password：a887

Dropbox

RK3399_RISC_DIV251009.xml  
RK3399 ROM-5780 B1 DIV251029 2022/03/15 GA Release_Note Baidu      Password：a887

Dropbox

RK3399_RISC_DIV251029.xml MP Version
  • Alpha:  Basic I/O function bring up by RD;
  • Beta:  Basic I/O function、performance and middleware verified by RD. Peripherals integrated;
  • GA:  Beta version by QE verification;
  • RTM:  Beta version by SI/Power/QE verification and pre-loaded;

DS-100

Linux 燒錄方法 (Linux Flash eMMC Method)

Debug 串口調試 (Debug port Setting)

以 Tera Term  为例介绍如何使用串口调试功能 

   Baud Rate波特率：115200
   Data 数据位：8
   Parity 奇偶校验：无
   Stop 停止位：1
   Flow Control流控：无

Tera Term Tool 

RTENOTITLE

RTENOTITLE

Check the Sriel port in Device Manager (查看PC端的串口号)：

if you can not identify the Serial device , please check your serial driver. 

RTENOTITLE

Debug port connection (串口連接) 

RTENOTITLE

Log into Terminal  Tool (进入串口调试终端)：

Linux系统的基本使用(Linux System Basic Operating Method)

Display Setting (ROM-5780)

乙太網路使用方法(Ethernent Testing Method)

Command : ifconfig 

Command: Ping - I eth1 8.8.8.8  or Ping - I eth0 8.8.8.8  

 

WiFi使用方法(WIFI Testing Method)

Command : 

# killall wpa_supplicant
# ifconfig wlan0 up
# wpa_passphrase "SSID" "PASSWORD" > /tmp/wpa.conf
# wpa_supplicant -BDwext -iwlan0 -c/tmp/wpa.conf
# udhcpc -b -i wlan0'''

ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=54 time=2.10 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=54 time=2.10 ms

RTENOTITLE

4G使用方法(4G Testing Method)

Command:
Test 4G: (EWM-C117FL06E - USB)
Step 1: Connect EWM-C117FL06E to Mini PCIE slot on 9680015491 and connect
the card to CN6 PCIe_D slot on ROM-DB5901.
Step 2: Connect the antenna 1750007990-01 to the SMA (F) connector on
9680015491
and connect the IPEX connector to MT1 on EWM-C117FL06E module.
Step 3: Connect the Mini USB cable from 9680015491 to USB 2.0 Type A port on
ROM-DB5901.
Step 4: Power on and execute the pppd command to connect to the network.

RTENOTITLE

RTENOTITLE

串口使用方法(Serial Port Operating Method)

RS-232 Test

SER1_UART2: /dev/ttyLP2: COM1

SER3_UART0: /dev/ttyLP0: COM3

SW6/7 Setting (SW6/7設置) 

RS232: 1:on  2:off

RS422: 1:on  2:on

RS485: 1:off  2:on

RTENOTITLE

COM0 (CN15A): UART1 test

Loopback Test (eg. ttyLP1)
UART 1: Change SW7 jumper to switch modes. (1ON 2OFF: RS-232)

UART 1: Change CN27~CN30 jumper to (1-2 short) 

# stty -F /dev/ttyLP1 -echo -onlcr 115200
# cat /dev/ttyLP1 &
# echo test > /dev/ttyLP1

蓝牙使用方法(BlueTooth Operating Method)

Command : 

$ hciconfig hci0 up
$ bluetoothctl
$ discoverable on
$ pairable on
$ scan on
[NEW] FC:18:3C:8D:75:F4 myphone
$ scan off
$ pair FC:18:3C:8D:75:F4
$ connect FC:18:3C:8D:75:F4

RTENOTITLE

  遠程訪問及文件傳輸(Remote Access and File Transimmion)

              查看主板IP位址 ( Chech IP Address )：​ 

        Command : ifconfig

Windows下SSH访问及文件传输

SSH Remote Log into Device 

  • SSH远程登录,以putty选择putty.exe(或者使用Xshell、SecureCRT等类似软件)
  • 需要设置远程设备的IP、通讯端口(默认22)、通讯方式，登录后验证用户名密码

RTENOTITLE

RTENOTITLE

 

RTENOTITLE

通用方法(General Method)

       查看CPU温度(Check CPU Temperature)

     /# cat /sys/devices/virtual/thermal/thermal_zone0/temp 44600

    # 或者直接以度爲單位顯示 echo $[$(cat /sys/class/thermal/thermal_zone0/temp)/1000]° >>> 45°

      查看CPU频率(Check CPU Frequency)

           cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq 
           >> 900000
           cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq    
           >> 1200000


      读取DDR频率（Read DDR frequency)

# cat /sys/class/devfreq/dmc/cur_freq
856000000

 

      查看存储容量(Check Storage Capacity)

 

      網路Ping測試(Ping Network Testing)

     ping 8.8.8.8
     PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
     64 bytes from 8.8.8.8: icmp_seq=1 ttl=54 time=2.10 ms
     64 bytes from 8.8.8.8: icmp_seq=2 ttl=54 time=2.10 ms

      設置RTC (RTC Setting) 

 

         

Linux BSP編譯方法(Linux BSP Compile Method)

Debian 10 

Debian 9 

如果有驗證上的錯誤 請使用以下的方法

### repo sync failed with Server certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none
============================================================
export GIT_SSL_NO_VERIFY=1
#or
git config --global http.sslverify false
============================================================

 

Retrieved from "https://ess-wiki.advantech.com.tw/wiki/index.php?title=ROM-5780_user_guide&oldid=35033"