Difference between revisions of "IoTGateway/Features/Linux"
From ESS-WIKI
| Line 217: | Line 217: | ||
<section end="module"></section> | <section end="module"></section> | ||
| + | |||
= Bridge ICs = | = Bridge ICs = | ||
| + | {| class="wikitable" | ||
| + | |- | ||
| + | ! Feature | ||
| + | ! Description | ||
| + | |- | ||
| + | | [[IoTGateway/Features/Linux/Peripheral#ADC|ADC]] | ||
| + | | On-module analogue to digital converters (ADC) | ||
| + | |- | ||
| + | | [[IoTGateway/Features/Linux/Peripheral#Audio|Audio]] | ||
| + | | Audio test | ||
| + | |- | ||
| + | | [[IoTGateway/Features/Linux/Peripheral#Backlight|Backlight]] | ||
| + | | Tips for backlight operations | ||
| + | |- | ||
| + | | [[IoTGateway/Features/Linux/Peripheral#Camera|Camera]] | ||
| + | | How to use camera | ||
| + | |- | ||
| + | | [[IoTGateway/Features/Linux/Peripheral#CAN_Bus|CAN Bus]] | ||
| + | | How to use CAN Bus | ||
| + | |- | ||
| + | | [[IoTGateway/Features/Linux/Peripheral#CPU|CPU]] | ||
| + | | Change CPU related setting | ||
| + | |- | ||
| + | | [[IoTGateway/Features/Linux/Peripheral#Ethernet|Ethernet]] | ||
| + | | Ethernet test and benchmark | ||
| + | |- | ||
| + | | [[IoTGateway/Features/Linux/Peripheral#Framebuffer|Framebuffer]] | ||
| + | | Get mode and play video | ||
| + | |- | ||
| + | | [[IoTGateway/Features/Linux/Peripheral#GPIO|GPIO]] | ||
| + | | How to use GPIO by sysfs | ||
| + | |- | ||
| + | | [[IoTGateway/Features/Linux/Peripheral#GPS|GPS]] | ||
| + | | GPS module testing | ||
| + | |- | ||
| + | | [[IoTGateway/Features/Linux/Peripheral#I2C|I2C]] | ||
| + | | i2ctool introduction | ||
| + | |- | ||
| + | | [[IoTGateway/Features/Linux/Peripheral#IR|IR]] | ||
| + | | How to test IR | ||
| + | |- | ||
| + | | [[IoTGateway/Features/Linux/Peripheral#SPWG.2FJEDIA|SPWG/JEDIA]] | ||
| + | | How to setting SPWG/JEIDA mode | ||
| + | |- | ||
| + | | [[IoTGateway/Features/Linux/Peripheral#RTC|RTC]] | ||
| + | | How to test Real-time clock | ||
| + | |- | ||
| + | | [[IoTGateway/Features/Linux/Peripheral#SATA|SATA]] | ||
| + | | SATA disk test | ||
| + | |- | ||
| + | | [[IoTGateway/Features/Linux/Peripheral#SD.2FMMC|SD/MMC]] | ||
| + | | SD/MMC test | ||
| + | |- | ||
| + | | [[IoTGateway/Features/Linux/Peripheral#SPI|SPI]] | ||
| + | | SPI flash test | ||
| + | |- | ||
| + | | [[IoTGateway/Features/Linux/Peripheral#UART|UART]] | ||
| + | | UART test | ||
| + | |- | ||
| + | | [[IoTGateway/Features/Linux/Peripheral#USB|USB]] | ||
| + | | USB host/client test | ||
| + | |- | ||
| + | | [[IoTGateway/Features/Linux/Peripheral#Watchdog|Watchdog]] | ||
| + | | How to test Watchdog | ||
| + | |- | ||
| + | | [[IoTGateway/Features/Linux/Peripheral#Led|Led]] | ||
| + | | Led test | ||
| + | |} | ||
= Display = | = Display = | ||
Revision as of 04:22, 3 June 2020
[edit]
| Feature | Description |
|---|---|
| ADC | On-module analogue to digital converters (ADC) |
| Audio | Audio test |
| Backlight | Tips for backlight operations |
| Camera | How to use camera |
| CAN Bus | How to use CAN Bus |
| CPU | Change CPU related setting |
| Ethernet | Ethernet test and benchmark |
| Framebuffer | Get mode and play video |
| GPIO | How to use GPIO by sysfs |
| GPS | GPS module testing |
| I2C | i2ctool introduction |
| IR | How to test IR |
| SPWG/JEDIA | How to setting SPWG/JEIDA mode |
| RTC | How to test Real-time clock |
| SATA | SATA disk test |
| SD/MMC | SD/MMC test |
| SPI | SPI flash test |
| UART | UART test |
| USB | USB host/client test |
| Watchdog | How to test Watchdog |
| Led | Led test |
| Name | Function | OS | Description |
|---|---|---|---|
| EWM-C106FT01E | 3G | Android 4.x | HSUPA Full-size Mini PCIe Card |
| EWM-W142F01E | WiFi | Android 4.x | CIRCUIT MODULE, 802.11 b/g/n,AR9287,2T2R,Full size Mini PCIe |
| EWM-W151H01E | WiFi | Advantech 802.11bgn RTL8188EE 1T1R, 1-connector | |
| EWM-W155H01E | Bluetooth | Linux | Half-size Mini PCIe Card with 802.11abgn 2T2R with BT4.0, Atheros AR9462 |
| EWM-W155H01E | WiFi | Android 5.0 | Half-size Mini PCIe Card with 802.11abgn 2T2R with BT4.0, Atheros AR9462 |
| EWM-W157H01E | Wifi/Bluetooth | Linux | Half-size Mini PCIe Card with 802.11a/b/g/n/ac with 1T1R, BT4.0, Realtek RTL8821AE |
| EWM-W163M201E | Wifi/Bluetooth | Linux | WiFi & BT dual-band M.2 wireless module, a/b/g/n/ac, 2T2R, BT4.1, (A-E key) |
| EWM-W170H01E | WiFi | Linux | Half-size Mini PCIe IOT P-Product, USB bus interface HMC type 802.11AC module |
| EWM-W188 | Wifi/Bluetooth | Linux | 802.11 ac/a/b/g/n dual band 2x2 wifi and Bluetooth combo M.2 2230 module |
| AM Telecom AMM561KT | 4G | Linux | LTE-M M.2 type mini PCIe Card with a USB 2.0 interface |
| Sierra AirPrime MC8090 | 3G | Linux | HSPA+,GSM/GPRS/EDGE Mini PCIe Card with a USB 2.0 interface |
| Sierra AirPrime MC7304 | 4G |
Linux | HSPA+,GSM/GPRS/EDGE Mini PCIe Card with a USB 2.0 interface |
| Sierra AirPrime_MC7430 |
4G | Linux | HSPA+,GSM/GPRS/EDGE Mini PCIe Card with a USB 2.0 interface |
| Telit HE910-D | 3G | Android 5.0/6.0 | HSUPA Full-size Mini PCIe Card |
| QUECTEL UC20-G | 3G | Android 4.4.2 | HSUPA Full-size Mini PCIe Card |
| QUECTEL UC20-G | 3G | Linux | HSUPA Full-size Mini PCIe Card |
| QUECTEL EC20-E | 4G | Linux | HSUPA Full-size Mini PCIe Card |
| QUECTEL EC25-A | 4G | Linux | HSUPA Full-size Mini PCIe Card (Note: The LTE frequency cannot support in Taiwan) |
| QUECTEL EC25-AU | 4G | Linux | HSUPA Full-size Mini PCIe Card |
| EWM-C117 | 4G | Linux/Android6.0 | USB Card |
| EMIO-200U3 | USB | Linux | Provide a simple method of adapting two USB 3.0 devices to a modern PCIe x 1 port |
| AzureWave AW-CB178NF | Wifi/Bluetooth | Linux | AW-CB178NF. M.2 module supports PCIE for WLAN and high speed USB interface for Bluetooth 4.2 to the host processor |
| AzureWave AW-NB136NF | Wifi/Bluetooth | Linux | Azurewave AW-NB136NF / 802.11a/b/g/n WiFi + Bluetooth 4.0 / NGFF (M.2 1630) |
| Advantech USB-4704 | USB | Linux | 48 kS/s, 14-bit, 8-ch Multifunction USB Module |
| Advantech USB-4761 | USB | Linux | relay actuator and isolated digital input module for USB bus |
| EWM-C109FT01E | 3G | Linux | HSUPA Full-size Mini PCIe Card |
| Feature | Description |
|---|---|
| ADC | On-module analogue to digital converters (ADC) |
| Audio | Audio test |
| Backlight | Tips for backlight operations |
| Camera | How to use camera |
| CAN Bus | How to use CAN Bus |
| CPU | Change CPU related setting |
| Ethernet | Ethernet test and benchmark |
| Framebuffer | Get mode and play video |
| GPIO | How to use GPIO by sysfs |
| GPS | GPS module testing |
| I2C | i2ctool introduction |
| IR | How to test IR |
| SPWG/JEDIA | How to setting SPWG/JEIDA mode |
| RTC | How to test Real-time clock |
| SATA | SATA disk test |
| SD/MMC | SD/MMC test |
| SPI | SPI flash test |
| UART | UART test |
| USB | USB host/client test |
| Watchdog | How to test Watchdog |
| Led | Led test |
| Module Name | Type | OS | Description |
|---|---|---|---|
| 96LEDK-A070WV35NB1 | Single Channel | Linux | 7" Color TFT-LCD Panel, 800 x 480 |
| 96LEDK-A121XG50NE1 | Single Channel | Linux | 12.1" Color TFT-LCD Panel, 1024 x 768 |
| 96LEDK-C070WV50NA1 | Single Channel | U-Boot | 7" LED Panel 500N 800X480(G) |
| CHIMEI INNOLUX M185BGE | Single Channel | Linux | 18.5" Color TFT-LCD Panel, 1366 x 768 |
| AUO M240HW01-VB | Single Channel | Linux | 24" Color TFT-LCD Panel, 1920 x 1080, Dual channels |
| AUO G101UAN02 | MIPI DSI | Linux | 10.1” WUXGA Color TFT-LCD with LED Backlight design |
| IDK-1105R-50VGA1E | Touchscreen | Linux | 5.7” 640X480 VGA with 4-wire Resistive Touch Solution and LVDS Interface |
| IDK-1107WR-40WVA1E | Touchscreen | Linux/Android | 7" 800x480 LVDS 400nits -20~70℃ LED 6/8-bit with 4-wire Resistive Touch Display Kit |
| IDK-1107WP-50WVA1E |
Touchscreen |
Linux |
7" 800x480 LVDS 400nits -20~70℃ LED 6/8-bit with 4-wire Capacitive Touch Display Kit |
| IDK-1115R-40XGC1E | Single Channel | U-Boot | LCD DISPLAY, 15" LED panel 1024x768(G) with 5W R-touch |
| IDK-1115P-40XGC1E | Single Channel | Linux | 15" 1024x768 LVDS 400nits -20 to +70℃ LED 50K Projective Capacitive Touch Display Kit |
| IDK-1121WR-30FHA1E | Single Channel | Linux | 21.5” 1920x1080 LVDS 300nits 0~60℃ LED with 5-wire Touch Display Kit |
| IDS-3112EN-45SVA1E | Single Channel | Linux | 12" SVGA 450nits Open Frame Monitor |
| IDS-3112N-45SVA1E | Single Channel | Linux | 12" 800 x 600, LED Slim Open Frame Monitor with VGA/DVI Interface |
| Samsung-LTI370N01 Display | Dual Channel | Linux | 37" 1920×540, TFT-LCD, LVDS (2ch,10-bit)Interface |
| E21D03U-C01-04 Irtouch-Dualtouch | Touchscreen | Android | 21.5" 4:3, Dual-Touch, USB interface |
| AM-640480GETNQW-TA0H Ampire | Single Channel | Android | 5.7" 4:3, Single Channel, LVDS 640x480 |
Limitation
| Feature | Description |
|---|---|
| Console | console manipulations |
| Device Tree | |
| File System | File System support (NTFS...) |
| Fonts | Tips for installing additional fonts |
| GStreamer | Tips for playing video |
| Java | |
| Linux Kernel | |
| NFS | loading kernel and mounting rootfs via NFS |
| OpenCV | |
| Python | |
| Qt | Tips for Qt development |
| SSH | |
| TFTP | loading kernel via TFTP |
| Ubuntu | Building Ubuntu root file system |
| WiFi AP mode | Tips for enabling WiFi AP mode |
| Yocto | Tips for Yocto operation |
| CC2650 SensorTag | TI SensorTag |
| Bluetooth | Tips for Bluetooth tool |
| GPS | Tips for enabling GPS |
| Touch | Tips for enabling HID_MULTITOUCH |
| RT-Patch | Tips for patch RT patch file |
| USB-Boot | Tips for USB Boot function |
| Customized GPIO Function | Tips for customized GPIO function |
| Don't Check SPI JEDEC ID | Don't check SPI JEDEC ID in Ycoto2.1 U-boot Github |
| Don't_Check_SPI_JEDEC_ID | Don't check SPI JEDEC ID in Ltib U-boot 2009.08 |